IPDB › China Industry › Instruments & Meters
China, Chinese Amprobe at-6010 Advanced Wire Tracer Kit, 0 to 600 V AC/DC1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
DetectorHandheld Metal Detector0 to 600 V AC/DCAmprobeTracker
Shenzhen HOBOY Instruments Co., Ltd.
Preview:
Product Description Product Parameters Large LCD Receiver screen with two digit readout, bar graph and sound to easily determine wire locationSimple one button Transmitter operationCompatible with the CT-400 Signal Clamp accessory for inducing a tracing signal on the cable when there is no access to bare With the AT-6010 Advanced Wire Tracer, it's never been easier and safer to locate Energized and De-energized wires, breakers and fuses. When the Transmitter is connected to the circuit, the Receiver easily detects the signal in the wires or cables behind walls, ceilings and floors.The Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments, allowing for work directly on an energized circuit without the need to take equipment offline. The Transmitter also features high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage.The complete AT-6010 kit features test leads and accessories International accessory kit for use outside North America.Intuitive Transmitter automatically senses whether the system is energized or de-energizedMost accurate wire tracing in its class with eight sensitivity modesReliable, precise breaker identificationTested by Fluke and safety certified by 3rd party labsManufacturer SpecsAT6000 Series SpecificationsFeaturesAT-6010-R ReceiverAT-6010-T TransmitterCT-400 Signal ClampMeasurement categoryCAT III 600 VCAT III 600 VCAT IV 600 V, CAT III 1000 VOperating voltage0 to 600 V AC/DC0 to 600 V AC/DC0 to 1000 V ACOperating frequencyEnergized: 6.25 kHz, De-Energized: 32.768 kHzEnergized: 6.25 kHz, De-Energized: 32.768 kHzAC current measurement: 45 Hz to 400 HzHazardous voltage detection-> 30 V AC/DC-Signal indicationsNumeric, bar graph display and audible beepLEDs-Response timeTip Sensor (Energized/De-energized): 500 msBattery voltage monitoring: 5 secLine voltage monitoring: 1 secBattery voltage monitoring: 5 secInstantaneousCurrent output of signal (typical)-Energized circuit: HI mode: 60 mA RMSDe-energized circuit: HI mode: 130 mA RMSLoop mode: 160 mA RMS1 mA/A for AC current measurement with multimeterSignal voltage output (nominal)-De-energized circuit: HIGH: 33V RMS, 140 Vp-pWith CT-400: loop mode: 31 V RMS, 120 Vp-pDe-energized circuit: 2.4 V RMS, 24 Vp-pRange detection (open airTip sensor (Energized):Max distance via air: up to 20 ft (6.1 m)Pinpointing: approx. 1.97 in (5 cm)Tip sensor (De-energized):Max distance via air: up to 14.7 ft (4.5 m)Pinpointing: approx. 1.97 in (5 cm--General SpecificationsDisplay sizeLCD 2.5 in (6.35 cm)--Display dimensions (W x H)1.45 x 1.93 in (36.72 x 48.96 mm)--Display typeSegment LCDLEDs-Display colorBlack and whiteOperating mode LEDs: red, Battery status LEDs: red-Booting time< 3 sec< 2 sec-Backlight?--Operating temperature4 °F to 122 °F (-20 °C to 50 °C)32 °F to 122 °F (0 °C to 50 °C)Operating humidity45%: -4 °F to <50 °F (-20 °C to <10 °C), 95%: 50 °F to <86 °F (10 °C to <30 °C)75%: 86 °F to <104 °F (30 °C to <40 °C), 45%: 104 °F to 122 °F (40 °C to 50 °C)95%: 50 °F to <86 °F (10 °C to <30 °C)75%: 86 °F to <104 °F (30 °C to <40 °C)45%: 104 °F to <122 °F (40 °C to <50 °C)Storage temperature and humidity-4 °F to 158 °F (-20 °C to 70 °C), <95% RH-4 °F to 158 °F (-20 °C to 70 °C), <95% RHOperating altitude0 to 6561 ft (2000 m)0 to 6561 ft (2000 m)Transient protection-6.00 kV (1.2/50μS surge)-Pollution degree222IP ratingIP 52IP 40IP 40Drop test3.28 ft (1 m)3.28 ft (1 m)3.28 ft (1 m)Power supply4 x AA (alkaline)8 x AA (alkaline)-Power consumption (typical)70 mAHi mode: 70 mALoop mode with Clamp: 90 mAConsumption without signal transmission: 10 mA-Battery lifeApprox. 25 hHi mode: approx. 25 hLoop mode: approx. 18 h-Low battery indication??-Fuse--1.26 in (32 mm)Dimensions (L x W x H)Approx. 7.2 x 2.95 x 1.69 in (183 x 75 x 43 mm)Approx. 7.2 x 3.66 x 1.97 in (183 x 93 x 50 mm)Approx. 5.9 x 2.75 x 1.18 in(150 x 70 x 30 mm)WeightApprox. 0.6 lb (0.27 kg)Approx. 1.25 lb (0.57 kg)Approx. 0.25 lb (0.114 kg)Tech SpecsWire Tracers / Circuit Breaker Tracers/Wire Tracers / Circuit Breaker Tracers TemplateTestsShortsEnergized CircuitsYesDe-energized CircuitsYesMaximum Circuit Distance20 FtUnderground/Hidden Cable CapabilityYesType of AlarmAudible, VisualTone GeneratorYesClamp-on AttachmentNoIdentifies BreakersYesDistance to WireNoTest Equipment General AttributesWarranty1 YEARSSafety ApprovalCSA, ULProduct Weight2.1 LBSProduct Height9.45 INProduct Length13.00 INProduct Width9.45 INData LoggingNoECCN Number3A992Battery TypeAACountry of OriginChina Packaging & Shipping As an important international instrument sales platform, our company has the authorization qualifications of many international first-line brands. Relying on the advanced digital information management platform and international procurement platform, we provide more than 100,000 instruments, industrial MRO products, industrial products and spare parts to global customers. Our business scope: industrial testing, non-destructive testing, gas testing, electrical testing, laboratory testing, water quality testing, environmental testing, medical testing... So far, we have become an important partner of many global top 500 companies and well-known local Chinese companies. Create an efficient supply chain system to provide customers with strong supply guarantee.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...