IPDB › China Industry › Industrial Equipment & Components
China, Chinese Electro Hydraulic Actuator/Pneumatic Actuator/Hydraulic Actuator Can Be Equipped with Various Valves1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Pneumatic ComponentPneumatic ActuatorElectro-Hydraulic ActuatorHydraulic Actuator
Bruker Control Valve Manufacturing (Jiangsu) Co., Ltd.
Preview:
Product Description Integrated design, with built-in electro-hydraulic power source, actuator and electrical control box, small size, no need for external hydraulic pipelines, valve opening can be controlled only through cables;Modular design allows for flexible combination of different functions and specifications to meet the requirements of load and actual working conditionsFlexible installation methods, which can be installed as a whole or separately, to adapt to complex on-site situationsAdopting a bidirectional pump as the power source, the system circuit is simple, the reliability is high, the power consumption is low, and the maintenance cost is lowHydraulic power transmission, large output torque, high transmission efficiency, capable of over torque protectionLocal control and remote controlMultiple electrical systems and power sources are available, with a wide range of environmental temperature adaptabilityFully open, fully closed, and valve position feedback functionLock in place when stopping operation, and lock in place when power is lostBy driving the bidirectional gear pump to supply oil to the corresponding oil port through the forward and reverse rotation of the motor, the rack piston is pushed to reciprocate left and right, thereby driving the gear to rotate and swing;The system is integrated with an overflow valve, which can adjust the maximum pressure of the system, that is, the maximum output torque;Compact structure, integrated valve block with hydraulic lock. When the valve is opened/closed to the set position, the motor can automatically stop and the actuator maintains a fixed opening;Automatic valve position correction: When the valve is set to its opening, if there is a deviation in the valve position due to disturbance or other factors, the system will restart the motor, rotate forward or backward, to keep the valve at the set opening;Dead zone adaptive non oscillation: To avoid frequent motor start-up, the system sets a dead zone range, within which the motor will not start. DCB1.0DCB2.15DCB4.3Electrical machinery0.37KW0.75KW1.5KWMotorparametervoltageAC440V/380V/220VAC440V/380V/220VAC440V/380V/220Vfrequency50/60 Hz50/60 Hz50/60 HzSolenoid valveparameterFO&FC2/4-way single electronic control solenoid valve2/4-way single electronic control solenoid valve2/4-way single electronic control solenoid valveFL3/4-way dual electric control solenoid valve3/4-way dual electric control solenoid valve3/4-way dual electric control solenoid valvevoltage24VDC/220VAC24VDC/220VAC24VDC/220VACLimit switch voltage24VDC24VDC24VDCModel instrument feedback signa4-20mA(Only applicable to adjustable type)4-20mA(Only applicable to adjustable type)4-20mA(Only applicable to adjustable type)Motor working levelS2-10minS2-10minS2-10minPower unit flow rateapproximately1.0L/minapproximately2.15L/minapproximately4.3 L/minMaximum ambient temperature80oC80oC80oCDetailed PhotosFAQ1.Question:What is the working principle of electro-hydraulic linkage ball valve Answer:1. Remote control:1) Single acting FC (or FO): By sending an open (or close) signal to the electromagnetic directional valve, the valve can be opened (or closed). When the system encounters an emergency state such as power loss or signal loss, there is no need to point outIn the event of a power outage, the solenoid valve will reverse direction, and the spring in the actuator will quickly reset and automatically close (or open) the valve. 2) Intelligent valve regulation control: In working conditions where valve opening and stage speed are required to be regulated, the actuator is equipped with servo proportional valves, displacement sensors, and PLCs, operating at 4-20mAUnder the control signal, the actuator's 0 ° to 90 ° stroke positioning can be adjusted.Note: This electro-hydraulic actuator is a closed-loop control system that can set the following parameters on the actuator body: valve opening/closing speed, hydraulic system working pressure, and self-protectionDelay alarm time of protective device, etc.2. Local control cabinet operation:The control cabinet panel is equipped with emergency local operation buttons, valve position indicator lights, valve fault alarm lights, and emergency shut-off switches.The valve position indicator light displays the current status of the valve. If the valve open light is on, it indicates that the valve is in the open state. Similarly, if the valve close light is on, the valve is currently in the closed state.Valve position fault light: indicates that the valve is stuck or the hydraulic system is malfunctioning and requires maintenance.Emergency cut-off switch: Pressing this switch will automatically cut off the power supply of the control cabinet, causing the system to stop working instantly. At this point, the actuator is reset under the action of the spring.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...