IPDB › China Industry › Industrial Equipment & Components
China, Chinese M Series High Pressure Work Holding and Power Clamping Use Air Driven Liquid Booster Pump1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Pump Vacuum EquipmentPressure PumpLiquid PumpLiquid Booster
JINAN ODMT FLUID CONTROL EQUIPMENT CO., LTD.
Preview:
Product Description Product DescriptionM series pneumatic 32-1360 Bar Output Mini air Pneumatic liquid CO2 transfer pump for filling Liquid CO2 cylinder M-Series air driven liquid pump uses a built-in pneumatic control four-way two-position valve to move to and fro automatically. This series of product is produced by introducing related technology abroad and designing according to the standards of our country. The air driven parts are all made of aluminum alloy and are treated with oxidation. The pump head is made of carbon steel or stainless steel according to different media.M series pumps Single acting, single air drive headDiameter of drive plunger is 80mmThe diameter of the drive piston of this series is up to 80mm, air pressure≤8bar. This kind of pumps has the following characteristics:Light weight, portable design Large flow, wide pressure rangeApt to control, both manual and automatic controls are available.Appropriate for most fluidNo electricity is needed.Easy to maintainProduct Parameters TypePressure ratioOutlet pressureFlowConnectionsInletOutletNet weight KGbarpsiL/MinDrive portsM44:13246414.81G3/8G1ZG 1/24.8M1010:18011607.07G3/8ZG 3/4ZG 1/24.3M1616:112818564.55G3/8ZG 1/2ZG 1/24.2M3030:124034802.22G3/8ZG 1/2ZG 3/84.2M4444:135251041.36G3/8ZG 3/8ZG 3/84.1M6464:151274240.72G3/8ZG 3/8ZG 3/84.1M100100:1800116000.48G3/8ZG 3/8M14X1.54.1M170170:11360197200.28G3/8ZG 3/8M14X1.54.1*Pressure ratio is driven surface/driving surface.*Static outlet pressure (calculated and maximum allowed) at an air drive pressure of 8 bar (116 psi).*The minimum air drive pressure to start the pump is 3bar (43.5 psi). Depending on the pressure ratio a special outlet pressure can be reached.M-Series air driven liquid pump uses a built-in pneumatic control four-way two-position valve to move to and froautomatically, This series of product is produced by introducing related technology abroad and desianing accordingto the standards of our country. The air driven parts are all made of aluminum alloy and are treated with oxidation.The pump head is made of carbon steel or stainless steel according to different media.The diameter of the drive piston of this series is up to 80mm, air pressure≤8bar.ODMT products are driven by compressed air and have the following characteristics:1. The pressure can be adjusted through manual pressure control valve or air control valve;2. Driven by air, especially used in explosion-proof applications;3. Able to reach the preset final pressure;4. Automatic pressure compensation by the pump;5. Reliable operation, low maintenance cost and low noise during operation.6. Maintain pressure for a long time without consuming energy;7. The medium will not overheat when maintaining pressure;8. Easy to install and low maintenance cost. Just connect the gas source, inlet pipeline and pressure pipeline to workODMT gas-liquid booster pump can boost oil, water and chemical media with a pressure of 600MPa and is driven by 0.1-0.8MPa air or inert gas. It has compact structure and low cost. It can be widely used in fields such as machine tools, oil and gas, chemistry and petrochemical industry, national defense, mining, coal mining machinery, engineering machinery and aerospace.Instructions for use of ODMT air drive liquid pump:Installation locationIn principle, the ODMT liquid pump can be installed in any position, but to ensure the longest service life of the seal, vertical installation is recommended.Drive air connection and start-upThe drive air connection is located outside the pump's air-operated directional valve. In any case, a compressed air filter and a water separator need to be installed. An optional air control unit is a triplet: including filter with water separator, pressure reducing valve, pressure gauge, air lubricator (i.e. oil fogger).Recommended hydraulic oilThe correct use of the liquid pump and the efficiency of the liquid pump mainly depend on the quality grade used. The recommended viscosity range of hydraulic oil is 46#.Note: When operating continuously with moisture or high-humidity gas, icing will occur. In this case, it is recommended to install a water separator or dryer on the drive pipeline, coupled with an oil mist device. Choosing high-quality driving gas can extend the service life of liquid pump seals.Interface size mattersPlease confirm that the installed joints and pipes are within the pressure range of the pump. In order to ensure that the liquid pump obtains ideal flow and pressure, the interface size of the pump cannot be reduced.ODMT liquid pump operating temperatureStandard temperature range is -20oC to +60oC. (When the temperature is below 0oC, make sure the driving air source is dry and clean).Recommended driving air quality According to PNEUROP (European Supercharger, Pneumatic Pump and Gas Driven Workpiece Manufacturers' Committee) recommendation code 611/1984, driving gas is divided into 3-4 quality levels.1. Particles: Maximum particle size 54; Maximum particle concentration 5mg/m3; 2. Dew point: +10oC=moisture content 9.4g/m3+2oC=moisture content 5.6g/m3;3. Oil content: 1.0-5mg/m3. ApplicationApplications include:Pressure testingWork holding/power clampingJacking/liftingValve actuator controlHydraulic cylinder actuationPress safety overload devicesRoller tensioningMeteringPrecision lubrication and sprayingLiquefied gas transferPackaging & ShippingCompany ProfileExhibition d Customer Visit CertificationsFAQQ1. Where is your factory located ? How can I visit there?Our factory is located in Jinan city, Shang dong Province, China. We can go to Jinan airport and wait for your arrival.Q2 : Do you have stock for all items?A:In general, we have some stock, while if you need a bulk order, we still need time to produce it. Of course, we will inform all details you before your payment.Q3. How long can be finished the goods ?A : Sample order : within one week ; Large order : 15-25 days ; According to your purchase quantity.Q4. At which port do you usually ship the good?We usually ship goods via Qingdao port of China.Q5 : What is payment terms ?A: Sample order : 100% full payment before start to production; Large order : 30% deposit first, 70% pay after see the BL copy ;Q6: Can give free sample ?A : Free : if small spare parts and the cost not too much is ok ; Not Free : the cost expensive and all the machine can not be free ;
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...