IPDB › China Industry › Instruments & Meters
China, Chinese Reusable Temperature Probes with Single Thermistor Sterilized Ntc Thermistor1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
SensorTemperature Humidity SensorReusable Temperature ProbesTemperature Probe
Hefei Jingpu Sensor Technology Co., Ltd.
Preview:
Product Description Reusable Temperature Probes with Single Thermistor Sterilized NTC thermistor Product DescriptionThe item is reusable temperature probes with single thermistor sterilized NTC thermistor. Medical human body cavity temperature sensor ( esophgeal/ rectal temperature probe) be used for human body cavity temperature measurement, Used for the patient monitors. The reusable temperature probes be composed of metal disk and Mono audio plug 6.3mm and round sheath gray wire cable. Meanwhile, we also accept the customized plug or connector. The rated resistance value 2.252kΩ or 10kΩ. The measured temperature tolerance within ±0.1oC, compatible for replacement YSI400 series sensor. It is one sterilized reusable temperature probes.Product FeaturesEpoxy encapsulationReusabilityTemperature tolerance:(25~45)oC±0.1oCOperating temperature range: 0oC~50oCFast response timeSterilizationCompatible for monitorApplication: Suitable for medical monitoring equipmentStructure and Dimensions:(Unit:mm)NO.NameMaterial SpecificationQTY.Remarks1ChipNTC1/2ProbeEpoxy Resin1gray3Wire24AWG/1C OD3.1 Shielded round sheath wire1gray4 Plug 6.3MP-φ6.3*31-501gray Packaging & ShippingStandard packing (inner packing): 1 pcs/polybagOperation Notice Application:Temperature measure ; The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component. Avoid excessive heat shock,The hot air blow shoul d beat least 30mm to the probe in case heat shrink protection tube need to be attached. Storage Temperature 0oC~50oC,30%~80%RH;Avoid in a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.5.According to the structure of Glass coating NTC thermistor, when end user install, to avoid the epoxy head subjected too much tensile force and bending force from the lead wire,The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head.So as not to hurt the chip, resulting in resistance drifting and even open circuit, esepcially when the component is heated. Company Profile
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...