IPDB › China Industry › Instruments & Meters
China, Chinese Yuanben Magnetic Guide Sensor for Agv Applications Mgs-H161 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
SensorOther SensorsAgv SensorAgv Magnetic Sensor
Shanghai Yuanben Magnetoelectric Tech. Co., Ltd.
Preview:
Product Description MGS-H16 Magnetic Guidance Sensor for AGV appliance1. DescriptionThe Magnetic guiding sensor MGS-H16 developed by Yuanben, has a special made magnetic position sensor used to find small magnetic field (a magneic path is installed in the floor), and to keep the AGV heading direction continuously under control. The magnetic guidance sensors give signal about the AGV position deviations as the AGV passed the magnetic path, provides an output 16 BIT switches signal, turn at its magnetic path centre axis. The sensor can guide vehicles with the help of small magnetic field installed along the magnetic guide path, in the floor. the AGV magnetic guide path is normally 50mm width and 1.0~1.5 thickness, the cost to install such guide path is a fraction of the cost of other type guide wire installation. Magnetic guidance path can easily be installed in wood floors and other types of environment not well suited for guide wire installation. 2. AdvantageThe MGS-H16 Magnetic guidance sensor has high accuracy by use of high quality components. A low cost is achieved by using a combination of standard components together with our standard control board. The system is easy to install and compact. The magnetic guidance path in the floor may collect small magnetic particles and ferrous in the environment, this will however not cause any big problem under normal conditions. 3. FeatureMagnetic Tape Guidance AGV's route can be constructed in various locations, since the magnetic tape route can be constructed where the floor can not be carved. Modification of a magnetic tape route can be done easily and the route is durable against dust, water and light. MGS-H16 Magnetic Guide sensor detects the slight magnetic flux from a magnetic guide tape at operation distance 30mm (30mm to 40mm) and generates multiple switching signals, IP-65 housing is optionally available4. SpecificationProduct Model MGS-H-S-20-C20Product NumberMGS-H16 Material Of HousingPBT or Aluminum CaseSupply voltage+24 VDC ±5%, ripple (p-p) 1% max. Power consumption 35mA max. (at DC+24V) 70mA max. (at DC+12V) 75mA max. (at DC+5V) Digital type OutputNPN Transistor Open Collector Normally openApplicable voltage 30V max. Sink current 100mA max.Operation Temperature-10oC to +50oC (Non-freezing)Operation Humidity35 to 95%RH (Non-condensing)Prevent Class IP65Storage Temperature from -30 to +80oC Storage Humidity from 35% to 95%RH (no condensation) Target MGT-50 -25 series magnetic guide tapeOperation Air Gap30 to 40mm (standard MGT-50-25)Sensitivity N-pole;6mT and over/ S-pole; 6mT and over Element16 bits Pitch10mm at even intervals LogicNormally open CircuitNPN open collector (DC30V, 50mA max.) Residual voltage2V max. (at 50mA) Response1ms Insulation Resistance 50MOhmConnector MIL-C-83503, 20PinPrevent circuit Over-voltage and short circuit and reverse polarity protectionMounting Both Centre axis line of magnetic tape and sensor is CoincideAppliance AGV 5. Drawing6. Photos MGS-H16 is a type of magnetic guidance sensor(also named magnetic navigation sensor) which is used for track navigation unmanned driving type of AGV vehicle. The sensor is installed on the unmanned AGV vehicle, the sensor is 5mm away from the guide magnetic strip. When the vehicle is running, if the vehicle deviates from the track, the status of one or more bits of the 16-bit switch will change, the system can issue various instructions according to the difference of the sensor's switch status combination code,make the vehicle run correctly along the track; all of 16-bit switch's outputs are in NPN open collector mode. User may control load with working current smaller than100mA by using a switch as needed. MGS-H16 is an upgraded and optimized version of our company's MGS-R16 guide sensor. It adopts imported high-sensitivity magnetic sensors and large-scale integrated logic processing circuits,with better sensitivity. As long as the magnetic field at the sensor detection surface is higher than 6GS,offset detection can be performed;its structure.performance and application environment aere very close to those of SW-1924H imported from Japan and can be basically used interchangeably.It can replace Naviq,Roboteq, SENSATEC,SICK,MACOME brand products. but its price is much lower than imported products. with extremely high cost performance.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...