IPDB › China Industry › Instruments & Meters
China, Chinese ISO 817 Annex C Burning Velocity Test Equipment for Refrigerants or Flammable Gases1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Test InstrumentBattery TesterBurning Velocity Test EquipmentBurning Velocity Test Apparatus
Chongqing Advanced Technology Co., Ltd.
Preview:
Product Description Introduction ISO 817 Annex C Gas Burning Velocity Test Apparatus is used to measure the burning velocity of flammable gas with air mixed, such as refrigerants, li-ion battery thermal runaway venting gas, by testing on synthetically replicated gas.The flammable gas is pre-mix with air in a tank, and the homogeneous flammable gas-air mixture is introduced to the 1,200mm glass tube with an internal diameter of 40mm, and is ignited with the electrodes mounted at the bottom position of the glass tube. The flame will propagate from the lower to the upper end with a constant propagation speed at the flame front. The flame propagation inside the tube is recorded using a high-speed camera and the images are then transmitted to the computer for measuring the flame propagation speed and calculating the flame front area. The flammable gas's Burning Velocity (Su) is obtained by dividing the consumed mixture volume by the frame surface area.Standards:ISO 817 Annex CTechnical Features:1.High-temperature resistance burning tube, diameter of 40mm, length of 1200mm, pressure resistance better than 0.1MPa.2.10L Pre-mix chamber, with a pressure resistance of not less than 1 MPa.3.Pressure measurement system, measuring range of -0.1 to 0.3MPa, accuracy better than 0.05% F.S.4. This Burning Velocity Test Apparatus is equipped with a pressure relief port device and a special solenoid valve for gas distribution, with a solenoid valve with a pressure resistance of not less than 1.6Mpa and a response speed of not less than 10ms.5.K type insulated thermocouples, diameter of 1.6mm. Ignition system, equipped with 2 ignition needles and an ignition transformer.6.Vacuum pump, capacity no less than 1L/s, used for venting air from the chamber.7.Operation software, function includes gas mixture, gas fill, ignition, and camera activation.8.Automatic program for gas-air mixture preparation in specific concentrations.9.Flame area calculation software, auto calculate the cross-section area of flame base (af) and flame surface area (Af).10.High-speed camera, auto-triggered by the software.11.Compact physical size, low weight, and high light sensitivity allow use in limited space.12.The system captures at a speed of not less than 1,000 fps at full frame resolution conditions.13.The system captures at a speed of not less than 70,000 fps at 1280 x 8 pixel resolution conditions.14.Minimum exposure time up to 1.0μs.15.The system has a pixel size of 14.6μm, and dynamic range of 60dB.Dimensions and Weight:Dimensions: 1180*720*2200mm3 / 860*680*1100mm3Weight: 228 / 123KGInstallation Requirements:Power Supply: 220V, 2 AmpsOperating Temperature: 10°C to 35°CAuxiliary Gas: Compressed air Factory overviewCustomer Feedback GermanyUSATransporationFAQ1.What's the delivery time?About 3 or 4 months.2.What's your payment terms?30% paid by T/T in advance,70% paid by by T/T before shipping.3.What's your guarantee terms?The warranty of all products is 1 year.During this period,we are responsible for all faults caused by us.And we can supply life-long technical support. 4.Can you supply training?We can supply training in our factory and online training for free.If onsite installation and training are required,please pay for tickets,accommodation and salary USD250/Day for every person.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...