IPDB › China Industry › Metallurgy, Mineral & Energy
China, Chinese Fiberglass Insulated Aluminum Wire1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Aluminium AlloyAluminum Alloy WireFiberglass Insulated Aluminum WireInsulated Aluminum Wire
HENAN CHALCO ALUMINUM INDUSTRIAL CO.,LTD
Preview:
Product Description Fiberglass Insulated Aluminum WireA layer of non-conductive material, such as resin, plastic, silicone rubber and PVC, is evenly and sealed around the wire, forming an insulating layer to prevent electrical leakage, short circuit and electric shock from contact with the outside world.The glass in Glass Fibre Conductor may be applied in woven tape form or as a continuous fibre. It has proved to be an efficient insulation providing coil winders with thermal stability, adequate electrical properties and good resistance to abrasion after varnishing. The glass is bonded with a varnish to improve dielectric strength and mechanical properties. Glass fibre-lapped conductors (bare or enameled) are very suitable for windings of electric motor stators, generators, special transfo rmers and high voltage motors. In general this insulation can be applied where high mechanical strength and high insulation properties are required. Most common application is in traction motors. It exhibits a very high degree of mechanical and thermal stability, either for class F and H insulation when impregnated with polyester, Polyesterimide or epoxy based impregnating varnishes. For higher thermal class, the Glass fibre-lapped conductors can be impregnated with silicone based resins of thermal class 200. Characteristics : Conductor material : * Copper soft or with controlled proof stress (CPR);* Aluminium soft ; Type of insulation : E-glass, alkali free varnish-impregnatedType of varnish for impregnation :? polyurethane (TI 155);? polyesterimide (TI 180);? epoxy (TI 155);? epoxy B-stage (TI 155); Insulation options : ? 1 or 2 layers tangentially lapped;? 2 layers cross lapped;? Insulation increase to IEC 60317-0-4; Standards :IEC 60317-31IEC 60317-32Customer Specification Standard range of dimensions (Aluminium) :cross-section(mm2) : 5 to 120;width(mm) : 400 to 2000;thickness(mm) : 200 to 600;ratio w/t : <10; Specifications:CLASS : 155° : IEC 60317 -48/IS 13730-48CLASS : 180° : IEC 60317 -49/IS 13730-49CLASS : 200° : IEC 60317 -50/IS 13730-50As per Customer Specification. Applications :? Power generators? Traction motorsDetailed Photos
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...