IPDB › China Industry › Instruments & Meters
China, Chinese Industrial High Precision Total Organic Carbon Online TOC Analyzer1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Meter for Liquid GasOther Meters for Liquid GasTOC MeterCOD meter
Shanghai Chunye Instrument Technology Co., Ltd.
Preview:
Product Description T9009 Total Organic Carbon Online Analyzer [ Product description]Technology innovation & Quality excellence 1. Introduction Total Organic Carbon Online Analyzer (TOC) is based on the catalytic oxidation combustion method and non-dispersive infrared detection technology, the oxidation efficiency is close to 100%, the measurement time is less than 5 minutes, the unique multi-pass valve sampling quantitative technology, greatly improve the measurement accuracy and repeatability, can selectively measure total carbon, total organic carbon, total inorganic carbon, is a reliable operation, low maintenance, simple operation on-line analysis instrument.1.1 FeaturesMulti-pass valve sampling quantitative technology, and the sampling accuracy can be controlled at 1uL with CTFE valve. It has the strong corrosion resistance.Catalytic oxidation combustion technology, the oxidation efficiency is close to 100%, and it can freeze the water and remove it, besides it, it can improve CO2 detection accuracy;Non-dispersive infrared detection technology, good anti-jamming performance measurement time less than 5 minutes, low operating cost;Self-diagnosis, self-calibration function, long unattended time strong anti-interference ability, very low failure rate. 1.2 Main Uses and Scope of Application Suitable for surface water, pollution source discharge monitoring; tap water, sewage treatment process monitoring; circulating water, condensate water and other industrial water monitoring; and water organic matter load monitoring.2. Operating principleTotal organic carbon (TOC) is an important index to evaluate the degree of organic pollution in water bodies. It represents that the measurement of total TOC of organic matter in water bodies has been widely used in rivers, lakes, reservoirs, ocean monitoring and other aspects. There is a good correlation between TOC and COD.TOC is measured by oxidizing organic matter in water into CO2, and then measuring the amount of CO2 generated.The water sample to be tested was oxidized with acid to remove inorganic carbon, and then quantitatively added to the combustion furnace. The CO2 produced by organic carbon combustion in the water sample was sent to the NDIR detector after water removal to measure the total CO2, thus obtaining the TOC concentration in the water sample. 3. Specification Measurement principlesCatalytic oxidation combustion+ Non-dispersive infrared detectionMeasurement factorTC/TOC/CODThe scope of measurement(0-10,0-100,0-20,000)mg/LDPI0.01 mg/LMeasurement accuracy±3%Measurement time<5minCommunication interfaceMODBUS RS232Size(400×320×935)mmWork environment(5-45)oC,<85%RHWorking voltage220V ACPower dissipation200W 4. Installation Requirements(1)Installation site?Dry ventilation, ambient temperature within 5-45;?protect against direct sunlight;?Noncorrosive gas;?Install the instrument as close to the sample source as possible to reduce analysis delay(2)Installation spaceThe instrument's size (No including pre-processing system) is Wide* Deep* High= (400×320×935)mm, the instrument's diameter should greater than or equal to 200 mm, the front should greater than or equal to 560mm.(3)Power requirement?Voltage: 220V±10%; Frequency: 50 Hz-60 Hz; Power: 200 W.?The instrument should be in good condition.For voltage unstable areas, it is recommended to use a power-matched ac power regulator to protect the instrument.(4)Temperature and humidity requirementsAmbient temperature when the instrument is working : 5-45; Humidity: 85%, no dew 5. Warranty and Scope of Liability The warranty period of the equipment is one year. In case of failure caused by the company's responsibility within the warranty period, the Company will be responsible for free repair or replacement of parts. However, in case of the following circumstances, it cannot be handled within the warranty period Failure caused by misoperation; Repairs and modifications in addition to our Company; Equipment failure due to accidents not related to our company;The equipment malfunctioned due to a natural disaster;Failure caused by a fall;Failure or apparent damage caused by corrosion;Consumable parts.The Company shall not be liable for any damage caused by the failure of the product, data loss or other damage caused by the use of the Product.After Sales Service* The warranty period is 12 months from commissioning acceptance date on. In addition, we supply 1 year warranty and lifelong free technical guiding and training.* We guarantee the maintenance time no more than 7 working days and response time within 3 hour.* We build instrument service profile for our clients to record the product service and maintenance conditions.* After instruments start service, we will pay follow-ups to collect the service conditions.FAQWhat is the mini order quantity?MOQ: generally 1 unit/piece/setWhat payment methods are supported?Payment method: By T/T, L/C, etc.Payment terms: Generally, We accept 100% T/T in advance, balance before shipment.What are the available delivery methods?Our port location: Shanghai Delivering to: Worldwide Delivering method: by sea, by air, by truck, by express, combined transportationHow long is the product date of delivery probably?Delivery date differs with product type, order quantity, special requirement etc. Usually our big machine delivery date is around 15 ~ 30 days; test equipment or analyzer delivery date is around 3~7 days. Some products have stock, contact us anytime to get more information.How long is the warranty period?We warrants the plant supplied under agreed specification against defects in material and workmanship under normal use and service for a period of 1 years after start up of the system. How is the technical services on the product?You are welcome to contact us any time if you have any technical question. We will response promptly and answer to your satisfaction. If required and necessary, Engineer available to service and provide technical support for machinery overseas.Delivery and Packing:Our company:
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...