IPDB › China Industry › Industrial Equipment & Components
China, Chinese Sgj Anti Magnetic Ceramic Tube by Boron Nitride Bn-Silicon Nitride Si3n4-Silicon Carbide Sic-Zirconia Zro2-Alumina Al2O31 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Industrial Ceramic ProductsCeramic Tube RodElectrical InsulatingCeramic Reflector
Shaanxi Sgj International Co., Ltd.
Preview:
Product Description Industrial CeramicsSGJ Anti magnetic Ceramic Tube by Boron Nitride BN-Silicon Nitride Si3N4-Silicon Carbide SiC-Zirconia ZrO2-Alumina Al2O3Boron Nitride Ceramics:Boron nitride crystal belongs to the hexagonal crystal system, its structure is similar to that of graphite, and its performance has many similarities, so it is also called "white graphite". Boron nitride is a crystal composed of a nitrogen atom and a boron atom. The chemical composition is 43.6% boron and 56.4% nitrogen with four different variants: hexagonal boron nitride (HBN), rhombohedral boron nitride (RBN), cubic boron nitride (CBN) and wurtzite nitrogen. Boron (WBN). Properties:Boron nitride ceramic has good heat resistance, thermal stability, thermal conductivity and high temperature dielectric strength. It is an ideal heat dissipating material and high temperature insulating material. Boron nitride has good chemical stability and is resistant to most of the molten metal. It also has good self-lubricating properties. Boron nitride products have low hardness and can be machined with an accuracy of 1/100 mm. 1) BN is the only machinable ceramic with a processing precision of 0.01mm; 2) Insulation strength 2300v / cm, 8 times Al2O3; RT resistance > 10Ω.cm at 1000 ° C; 3) Its melting point is as high as 2800 ° C, it is a typical electrical insulator, and also an excellent thermal conductor; 4) Excellent thermal shock resistance, returning 100 times from 20 ° C to 1000 ° C without damage; 5) General metals (iron, copper, aluminum, lead, etc.), rare earth metals, precious metals, semiconductor materials (silicon, potassium arsenide), glass, molten salt (crystal, fluoride, slag), inorganic acids, alkalis Does not react.Boron nitride has excellent insulation properties, high thermal conductivity, chemical stability and machinabilityAs a semiconductor processing member, an electric furnace member, an electronic component assembly jig, etc. Application:Boron nitride ceramics can be used in the manufacture of high-temperature containers for metallurgical melting, semiconductor heat-dissipating insulation parts, high-temperature bearings, thermowells, and glass forming dies. ItemUnitTypical ValuesPhysical PropertiesColorWhiteDensityg/cm32.2-2.5Chemical Formula/BNContent43.6% boron, 56.4% nitrogenWater Absorption0Mechanical PropertiesRockwell Hardness(45N)R45N40Vickers Hardness (Load 500g)Gpa(Kg/mm2)24.5-28.2Flexural StrengthMpa350-600Compressive StrengthMpa800Modulus of ElasticityGpa441/475Thermal PropertiesThermal ConductivityW/m·K25.25-41Thermal Expansion Coefficient10-6/oC3.8-5.12Melting point°C3000Maximum Use Temperature°C1800Electronic PropertiesDielectric Constant3000K9.1Volume Resistivity(400~600oC)Ω.cm2.3~5.6MSiC, Silicon Carbide CeramicSilicon carbide is one material of very high strength and usually made into Reaction bonded silicon carbide ceramic posts / SiSiC pillars for energy saving . The Reaction bonded silicon carbide ceramic posts / SiSiC pillars for energy saving are lightweight and keep straight after long time working. Its maximum working temperature is up to 1380oC or 2500oF. It is mainly in sealing applications (sealing rings and bearings), high temperature applications (burners) and as abrasion-resistant materials (sandblasting nozzles). The whole production process of silicon carbide material, starting with mixing through processing and ending with final inspection of the final products is situated in our company.ItemUnitDataSiSiC % 85.07Free silicon % 13.79TemperatureoC1380Densityg/cm3≥3.02Open Porosity%<0.1Moh's Scale of Hardness-13Bending Strength MPa250(20oC)MPa280(1200oC)Modulus of ElasticityGPa330(20oC)GPa300(1200oC)Thermal ConductivityW/m.k45(1200oC)Coefficient of thermal expansionk-1×10-64.5Acid Alkaline -proof-ExcellentSi3N4 ceramicSilicon nitride is a kind of superhard material, which has lubricity, wear resistance, corrosion resistance and oxidation resistance at high temperature. It also resists cold and hot shocks and is heated to 1 in the air oC more than 1,000, rapid cooling and then rapid heating will not break apart, it is often used to make mechanical components such as bearings, turbine blades, mechanical seal rings, molds, etc. Silicon nitride ceramic has excellent mechanical, performance and processability, high temperature resistant ceramics, corrosion resistant ceramics, wear resistant ceramics, absolute magnetic ceramics, insulating ceramics and self-lubricating ceramics, etc. silicon nitride ceramic shaft sleeve is widely used in magnetic drive pump, chemical pump, mortar pump, mud pump, piston pump and so on. It has the advantages of excellent corrosion resistance, high coefficient of heatconductivity, self-lubricity, small expansion and so on. It can be widely used in the petroleum, chemical, machinery building, metallurgical industry and motors industries. The frictional factor of combinationof silicon carbide and carbongraphite is the least.Features1.The wear-resistant parts of the pulverizer.2.Ceramic bearings, heat exchangers.3.Chemical pump parts, various nozzles.4.High temperature cutting tools, fire resistant plates.5.Mechanical wear-resistant parts.6.Steel return raw material, arrester.7.Spare parts for other semiconductor manufacturing.Performance Index Of Si3N4 CeramicsTypeConditionPerformanceMain ComponentsNormal TemperatureSi3N4≥95%Bulk Density-g/cm3Normal Temperature3.22Elastic Modulus-GpaNormal Temperature350Vickers Hardness-HVNormal Temperature1870Bending Strength-MpaNormal Temperature780Fracture Toughness-MPa·m1/2Normal Temperature7.2Thermal Expansion Coefficient-10-6/K20-1000oC3.2Thermal Conductivity-W/20-1000oC25Glazed Alumina CeramicsGlazed Alumina Ceramics is a kind of material based on alumina, which is used in thick film integrated circuits. Alumina ceramics have good conductivity, mechanical strength and high temperature resistance. Alumina ceramics are widely used. Because of its superior performance, it has been widely used in modern society to meet the needs of daily use and special performance.Alumina electrical ceramics have low dielectric constant, low dielectric loss, high insulation strength, high volume resistivity, good bending strength, high stability, high compressive strength and good cold and hot shock resistance. It is widely used in temperature controller, insulation parts, thermal equipment, electric heating equipment, iron structure building, shipbuilding and so on.Alumina Manufacturing Description:Alumina Ceramics can be produced in a wide range of purities with additives designed to enhance its properties. Typical purities range from 85 to 99.7% although Precision Ceramics generally work over 99.7% material.It can be injection molded, die pressed, isostatically pressed, slip cast and extruded. Once fired and sintered, it can only be machined using diamondgrinding methods but prior to sintering advanced green and biscuit machining techniques developed by Precision Ceramics allow more complex components to be manufactured using traditional machining methods. In addition Alumina can be readily joined to metals or other ceramics using metallising and brazing techniques.Alumina can be machined in green, biscuit, or fully dense states. While in the green or biscuit form it can be machined relatively easily into complex geometries. However, the sintering process that is required to fully densify the material causes the alumiuna body to shrink approximately 20%. This shrinkage means that it is impossible to hold very tight tolerances when machining alumina pre-sintering. In order to achieve very tight tolerances, fully sintered material must be machined/ground with diamond tools. In this process a very precise diamond coated tool/wheel is used to abrade away the material until the desired form is created. Due to the inherit toughness and hardness of the material, this can be a time consuming and costly process.Precision Ceramics specialises in tight tolerance, highly complex work and has extensive in-house machining facilities - including 4th & 5th axis machining centres, drilling, grinding, milling, polishing, sawing, tapping, threading and turning - to enable us to manufacture Alumina components to the highest specifications.Precision Ceramics is your Alumina machining specialist for your technical ceramic prototyping & manufacturing needs; we are always happy to use our many years of advanced ceramics experience to provide advice on materials, design, and application. If you would like to buy Alumina plates, rods, tubes or custom machined components, please contact SGJ for more details.Alumina Electrical CeramicsAlumina electrical ceramics have low dielectric constant, low dielectric loss, high insulation strength, high volume resistivity, good bending strength, high stability, high compressive strength and good cold and hot shock resistance. It is widely used in temperature controller, insulation parts, thermal equipment, electric heating equipment, iron structure building, shipbuilding and so on. Alumina is the most cost effective and widely used material in the family of engineering ceramics. Extremely High Purity, Temperature & Strength; Excellent Corrosion, High Strength, Wear Resistant, Electronic Insulating, Structural & Metalizing, Porous, Easily Degassed & Machinable. The raw materials from which this high-performance technical grade ceramic is made are readily available and reasonably priced, resulting in good value for the cost in fabricated alumina shapes.Glazed Alumina Ceramics is a kind of material based on alumina, which is used in thick film integrated circuits. Alumina ceramics have good conductivity, mechanical strength and high temperature resistance. Alumina ceramics are widely used. Because of its superior performance, it has been widely used in modern society to meet the needs of daily use and special performance.SGJ Alumina Ceramic Features:? Excellent electrical insulation properties? High compressive and dielectric strength? High hardness and mechanical strength? High thermal conductivity and thermal shock resistance? Low density? Resistant to strong acid and alkali attack at high temperatures? Transparent to microwave radio frequencies? Very specific thermal conductive and thermal expansion rates? Wear and abrasion resistantSGJ 96% alumina is an easily metallisable ceramic composition:This material SGJ 96% alumina material is an excellent electrical insulator that can be metallised to facilitate high-temperature brazing of assemblies. This material features:Very high volume resistivityLow loss, constant high dielectricHigh density, non-porous and vacuum tightResists abrasive wear and chemical attackThe fact that this material can be metallised makes this a good choice for many ceramic to metal or brazed assemblies such as high-vacuum systems, laser equipment (gas, solid-state and waveguide), X-ray tubes and electron microscopes, microwave windows and insulators in medical and scientific equipment.Zirconia Toughened Alumina (ZTA)Zirconia Toughened Alumina (ZTA) is stronger and more economical than common Zirconia. The combination of 12% Zirconia with Alumina will be higher strength, toughness, hardness and wear resistance than Alumina Ceramic only.Common ZirconiaIndustrial Zirconia Ceramics provides unique and specific properties in extreme applications. Such as high strength, high toughness, wear/abrasion resistance, and corrosion resistance.Typical applications include Structural components, Bushings, Pistons, Sleeves, Bearing Rollers, Guides, Electrical Insulators, Luxury shell...Features of Zirconia Ceramic:Electrical insulationLow thermal conductivity, less than AluminaHigh strength, hardness & fracture toughnessNon-magnetic & wear resistantGood frictional behaviourCorrosion resistance in acids and alkalisModulus of elasticity similar to steelCoefficient of thermal expansion similar to iron.Applications of Zirconia Ceramic:Electric insulatorFuel cell partsThermocouple protection tubesInsulating rings in thermal processesFurnace process tubesWear resistance padsSandblasting nozzlesRefractory materialExtrusion diesBushings and capsKiln furniture crucibleFiber optic ferrules and sleevesKnives and bladesBearings & rollersWelding nozzles & pinsWire forming/drawing diesLaser partsGas ignitersCeramic guidersOxygen sensorsMedical and surgical componentMechanical sealsPumps, pistons, and linersPrecision shafts and axles in high wear environmentsFollow Products R&D by SGJ-International (Shaanxi Sgj International Co., Ltd.)
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...