IPDB › China Industry › Industrial Equipment & Components
China, Chinese JIS G3452 Od 3.18-810mm/Customized Class1/2 Welded Pipe Carbon Steel Tubes1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Industrial Pipeline PipesCarbon Steel PipeOil Gas Air PipelineJIS G3452 Pipe
EZ Steel Industrial Co., Ltd.
Preview:
Product Description Product Description Product NameJIS G3452 OD3.18-810mm Class1/2 Welded Pipe Carbon Steel Round TubesSize OD3.18-810mmThickness0.2-40mmMax Length50mUsageGas Industry, Oilfield, Thermal power, Oil industry, Shipbuilding, Petrochemical, Tanker, Nuclear , etcSurfacePickling and annealing,pickling and annealing+polishing+ EP(Electricity polish)EndPlain, Beveled with capsPackageReinforced plywood case bysted angle bar, Playwood cased Plastic bags packing, Condenser, heat exchanger tube packing, U-tube packed with wooden cases.InspectionWith Hydraulic Testing, Ultrasonic testing or X-ray TestTPITUV, SGS, BV, Lloyd's, etc.Payment:L/C at sight, L/C 180 days, T/T, D/P, OA, Western Union, Port of ShipmentShanghai port in ChinaJIS G3452 Steel PipeJIS G 3452 is used for piping with relatively low working pressure such as steam, water (except for water supply), oil, gas, air, etc.JIS G3454 carbon steel pipes are used for pressure pipes used at temperatures below about 350°C. However, this does not apply to carbon steel pipes for high-pressure piping. This standard is applicable to pipes with an outside diameter of 10,5 mm (nominal diameter 6A or 1/8B) to 660,4 mm (nominal diameter 650A or 26B). In addition, the items of special quality specifications that the orderer specifies in advance by agreement with the manufacturer. Outside Diameter ToleranceClassificationOutside Diameter b)Tolerances onOutside Diameter c)Applicable DivisionClass 1Under 50mm± 0.5mmApplied when there is no specification. Applicable to hot-finished seamless steel tubes.50mm or Over± 1%Class 2Under 50mm± 0.25mmApplied when there is a specification. Not applicable to hot-finished seamless steel tubes.50mm or Over± 0.5%Notesa) For the local parts such as repaired parts if the wall thickness can be confirmed to be within the tolerance in the table below, the outside diameter tolerance of this table need not be applied.b) The method for measuring the outside diameter of tubes exceeding 350mm in outside diameter may be determined by the circumferential length. The mutual conversion of outside diameter D and the circumferential length l shall be by the following formula: D = l / π Where D: outside diameter (mm) l: circumferential length (mm) π:3.1416c) The tolerances on the outside diameter of ends of electric resistance welded and automatic arc welded steel tubes exceeding 350mm in outside diameter shall be ±0.5%. JIS G3452 SGP Pipe Dimension:Nominal diameterOutside diameter (mm)Tolerances on the outside diameterWall thicknessTolerances on wall thicknessUnit mass excluding socketABPipes to be cut in taper threadOther pipesmmkg/m61/810.5±0.5mm±0.5mm2+ Not specified-12.5%0.41981/413.8±0.5mm±0.5mm2.30.664103/817.3±0.5mm±0.5mm2.30.866151/221.7±0.5mm±0.5mm2.81.25203/427.2±0.5mm±0.5mm2.81.625134±0.5mm±0.5mm3.22.45321 1/442.7±0.5mm±0.5mm3.53.16401 1/248.6±0.5mm±0.5mm3.53.6350260.5±0.5mm±1%3.85.12652 1/276.3±0.7mm±1%4.26.3480389.1±0.8mm±1%4.28.49903 1/2101.6±0.8mm±1%4.29.741004114.3±0.8mm±1%4.512.21255139.8±0.8mm±1%4.516.11506165.2±0.8mm±1%519.21757190.7±0.9mm±1%5.324.22008216.3±1.0mm±1%5.830.42259241.8±1.2mm±1%6.23625010267.4±1.3mm±1%6.641.230012318.5±1.5mm±1%6.953.835014355.6-±1%7.965.240016406.4-±1%7.977.645018457.2-±1%7.987.550020508-±1%7.997.4 Detailed Photos
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...