IPDB › China Industry › Instruments & Meters
China, Chinese Germany Lmv37.400A2 Siemens or Gas Pellet Burner Controller Control Unit for Gas Ignition Control1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
HeatingRefrigeration Temperature ControlThermostat Temperature ControllerBurner ControllerGas Burner Controller
Shenzhen YHG Heating Science & Technology Co., ltd
Preview:
Product Description Germany LMV37.400A2 Siemens OR Gas Pellet Burner Controller Control Unit For Gas Ignition ControlProduct Description Brief Description:To avoid injury to persons, damage to property or the environment, the following warning notes must be observed! LMV37.4... are safety devices! Do not open, interfere with or modify the units. Siemens does not assume responsibility for damage resulting from unauthorized interference! The chapters covering the LMV37.4... contain additional warning notes which should also be observed when using the different unit versions! After commissioning and after each service visit, check the flue gas values across theentire output range! Detailed PhotosElectrical connection of the LMV37.4...The LMV37.4... operates with the following low-voltages:1.SELV (Safety Extra Low-Voltage) and PELV (Protective Extra Low-Voltage)ensure protection against electric shock hazard2. FELV (Functional Extra Low-Voltage) without safe separation offers no protectionwhich, in the event of fault, would not exclude risks Installation notes 1.Always run the high-voltage ignition cables separate from the unit and other cables while observing the greatest possible distances 2Ensure that the electrical wiring inside the boiler is in compliance with national and local safety regulations 3.Mains power must always be supplied via L and N. This means that no potential differential must exist between the neutral conductor N and protective earth PE 4.Phase and neutral conductor must not be interchanged (dangerous malfunctions, lossof protection against electric shock hazard, etc.) Make certain that strain relief of the connected cables is in compliance with5.the relevant standards (e.g. as per DIN EN 60730 and DIN EN 60335) 6.Ensure that spliced wires cannot get into contact withneighboring terminals. Use adequate ferrulesRun the high-voltage ignition cable completely separate from all other cables 7.The burner manufacturer must protect unused terminals of the LMV37.4... by fitting dummy plugs (exception: X64 (reserve) and X74) When making the wiring, the AC 120 V or AC 230 V section must be strictly separated from other voltage sections, thus ensuring protection against electric shock hazard. For more detailed information, refer to chapter Electrical connection of the LMV37.4...8.The connectors of the connecting cables for the LMV37.4... may only be removed or exchanged when the plant is turned off (all-polar disconnection), since the BCI interface does not provide safe separation from mains voltage9.AGV50... signal cable between LMV37.4... and AZL2... Since the BCI carries FELV (refer to chapter Electrical connection of the LMV37.4...), the connection between LMV37.4... and AZL2... must be established via the AGV50... signal cable, or by ensuring compliance with the specification. The signal cable is specified for use under the burner hood. When using other types of signal cable that do not meet the specification requirements, safety against electric shock hazard is not necessarily ensured Do not lay signal cable AGV50... from the LMV37.4... to the AZL2… together with other cables10.Service operation with a longer signal cable from the LMV37.4...: If a longer signal cable is required for service work for example (short-time usage, PRODUCT SPECIFICATIONSitemvalueConditionNewWarranty1.5 yearsApplicable IndustriesHotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising CompanyWeight (KG)3Showroom LocationNoneVideo outgoing-inspectionProvidedMachinery Test ReportProvidedPlace of OriginGermanyBrand NameSiemensTypeGas BurnerProduct nameGermany LMV37.400A2 Siemens OR Gas Pellet Burner Controller Control Unit ModelLMV37.400A2BrandSiemensAfter Warranty ServiceVideo Technical SupportColorGrey And Whitetemperature-20°C--+60oCMains voltage230 V 50...60 HzShipping TermDHL/UPS/Fedex/TNTApplication/UsageIndustrial ApplicationDeliverypayment after about 2 daysGermany LMV37.400A2 Siemens OR Gas Pellet Burner Controller Control Unit For Gas Ignition ControlRecommend Products Germany LMV37.400A2 Siemens OR Gas Pellet Burner Controller Control Unit For Gas Ignition Control
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...