IPDB › China Industry › Tools & Hardware
China, Chinese Bosswinn Flat Torsion Spring Strip Spiral Spring1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Hardware AccessoriesSpringSpiral SpringStrip Spring
Zhuji Bosswinn Springs Co., Ltd.
Preview:
Product Description Product Description Spiral torsion springs, also referred to as clock springs or flat spiral springs, are precision-engineered components commonly manufactured from high-carbon steel or stainless steel. These springs are wound in a flat state and are uniquely designed so that their coils remain separated and do not come into contact with each other during operation. One end of the spring is securely fixed in place, while the other is attached to a rotating component, allowing the spring to generate controlled torque. This specialized design not only provides a more consistent and reduced force output but also eliminates coil friction entirely when properly installed. As a result, spiral torsion springs offer smooth, reliable performance in a wide range of mechanical applications, making them ideal for use in various industries, including automotive, aerospace, medical devices, and industrial machinery. CategoryRaw Material (Examples)Finished Product – Spiral Torsion Spring (Examples)Material TypeHigh-carbon steel (1075, 1095) / Stainless steel (301, 316)Hardened and tempered spring steelThickness Range0.1 mm - 2.0 mm0.2 mm, 0.5 mm, 1.2 mm, 1.8 mmWidth Range2 mm - 50 mm5 mm, 10 mm, 25 mm, 40 mmCoil Outer DiameterNot applicable10 mm, 25 mm, 50 mm, 100 mmCoil Inner DiameterNot applicable5 mm, 12 mm, 30 mmFree LengthNot applicable20 mm, 50 mm, 100 mmTorque OutputNot applicable0.2 Nm, 1.5 Nm, 5 Nm, 15 NmElastic LimitDefined by material propertiesUp to 2000 MPa (depends on material and design)Hardness35-55 HRC (raw material)45-55 HRC (after processing)Modulus of Elasticity190-210 GPa (steel) / 180 GPa (stainless steel)Remains the same as base materialMaximum Operating Temperature200°C (carbon steel), 600°C (stainless steel)Varies by material and applicationFrictionNot applicableCoil friction-free when installed correctlyDurabilityMaterial fatigue based on load cycles>1,000,000 cycles with proper useWeight (Example)50 g (small spring), 200 g (medium spring), 500 g (large spring)Varies by dimensions and materialApplicationSpring manufacturingAutomotive seat belts, medical retractors, power toolsAdvantagesHigh strength, corrosion resistance (stainless steel)Precise torque control, reduced friction, long service lifeOur production1. Design and EngineeringAccurate Specifications: Ensure detailed design specifications, including dimensions, torque requirements, material type, and tolerances, are clearly defined.CAD Modeling: Use advanced CAD software to create precise designs and simulate performance before production.Customization: Tailor designs to meet specific application requirements, such as load capacity, rotation limits, and environmental conditions. 2. Material SelectionHigh-Quality Materials: Choose materials (e.g., stainless steel, carbon steel, or alloy) that meet the required strength, durability, and corrosion resistance.Material Testing: Conduct material testing to verify properties like tensile strength, elasticity, and fatigue resistance.Supplier Quality: Partner with reliable suppliers to ensure consistent material quality. 3. Precision Manufacturing ProcessesCoiling Technology: Use advanced coiling machines to ensure consistent coil formation and precise pitch control.Heat Treatment: Implement proper heat treatment processes to enhance spring strength and durability.Surface Finishing: Apply coatings or finishes (e.g., plating, powder coating) to improve corrosion resistance and aesthetics. 4. Quality Control and TestingIn-Process Inspections: Conduct regular inspections during production to identify and correct defects early.Torque Testing: Verify torque output and rotational performance to ensure springs meet design specifications.Durability Testing: Perform fatigue and load testing to ensure long-term reliability.Compliance: Ensure products meet industry standards (e.g., ISO, ASTM) and customer requirements. 5. Workforce Training and Skill DevelopmentTechnical Training: Train operators and technicians on advanced machinery and production techniques.Quality Awareness: Educate staff on the importance of quality control and adherence to standards.Cross-Functional Teams: Encourage collaboration between design, engineering, and production teams for seamless workflows. 6. Inventory and Supply Chain ManagementRaw Material Inventory: Maintain optimal stock levels to avoid production delays.Supplier Relationships: Build strong relationships with suppliers to ensure timely delivery of high-quality materials.Production Scheduling: Use efficient scheduling tools to minimize downtime and maximize productivity. 7. Cost ManagementWaste Reduction: Implement lean manufacturing principles to minimize material waste and optimize resource usage.Process Optimization: Continuously improve processes to reduce production costs without compromising quality.Budget Control: Monitor production costs and align them with financial targets. 8. Technology and AutomationAdvanced Machinery: Invest in modern coiling, punching, and CNC machines for precision and efficiency.Automation: Use automated systems for repetitive tasks to improve consistency and reduce labor costs.Data Analytics: Leverage data to monitor production performance, identify bottlenecks, and make informed decisions. 9. Customer-Centric ApproachCustom Solutions: Work closely with customers to develop springs tailored to their specific needs.Timely Delivery: Ensure on-time delivery through efficient production planning and logistics.After-Sales Support: Provide technical support and address any issues promptly to maintain customer satisfaction. 10. Continuous ImprovementFeedback Loops: Gather feedback from customers and production teams to identify areas for improvement.Innovation: Stay updated with industry trends and adopt new technologies to enhance production capabilities.Sustainability: Implement eco-friendly practices, such as recycling scrap materials and reducing energy consumption. By focusing on these key management points, spiral spring production can achieve high levels of efficiency, quality, and customer satisfaction, ensuring a competitive edge in the market. quality control for bosswinn spiral springs Quality control is a critical aspect of spiral spring production at Zhuji BossWinn to ensure that every spring meets the highest standards of performance, durability, and reliability. Below is a detailed outline of the quality control process for BossWinn spiral springs: 1. Incoming Material InspectionMaterial Verification: Ensure raw materials (e.g., stainless steel, carbon steel, or alloy) meet specified standards and certifications.Dimensional Checks: Verify material dimensions and tolerances before production begins.Material Testing: Conduct tests for tensile strength, elasticity, and corrosion resistance to confirm material suitability. 2. In-Process Quality ControlCoiling Precision: Monitor the coiling process to ensure consistent coil formation, pitch, and diameter.Heat Treatment Monitoring: Validate heat treatment parameters (e.g., temperature, duration) to achieve desired mechanical properties.Surface Finish Inspection: Check for uniformity in coatings or finishes (e.g., plating, powder coating) to ensure corrosion resistance and aesthetics.Visual Inspections: Regularly inspect springs for defects such as cracks, burrs, or deformities during production. 3. Torque and Performance TestingTorque Measurement: Test the torque output of each spring to ensure it meets design specifications.Rotational Testing: Verify the spring's performance under rotational stress to ensure smooth operation within the required angular range.Load Testing: Apply load to the spring to confirm it can handle the intended force without deformation or failure. 4. Durability and Fatigue TestingCycle Testing: Simulate real-world usage by subjecting springs to repeated cycles of compression, extension, or rotation to assess longevity.Fatigue Resistance: Evaluate the spring's ability to withstand stress over time without losing performance.Environmental Testing: Test springs under varying conditions (e.g., temperature, humidity, corrosion) to ensure reliability in different environments. 5. Final Inspection and Dimensional VerificationDimensional Accuracy: Use precision measuring tools (e.g., calipers, micrometers) to verify critical dimensions, such as inner/outer diameter, wire thickness, and free length.Visual and Surface Inspection: Conduct a final visual check for surface defects, scratches, or inconsistencies.Functional Testing: Perform a final functional test to ensure the spring operates as intended in its application. 6. Documentation and TraceabilityBatch Tracking: Maintain detailed records of each production batch, including material sources, production dates, and test results.Certification: Provide certificates of compliance (e.g., ISO, RoHS) to demonstrate adherence to industry standards.Customer-Specific Documentation: Include detailed reports for customers, such as torque curves, test results, and inspection records. 7. Customer Feedback and Continuous ImprovementCustomer Input: Gather feedback from customers to identify areas for improvement in design, performance, or quality.Root Cause Analysis: Investigate and address any defects or failures reported by customers.Process Optimization: Continuously refine production and quality control processes to enhance product quality and efficiency. 8. Compliance with Industry StandardsISO Certification: Ensure all processes comply with ISO 9001 quality management standards.Industry-Specific Standards: Adhere to standards relevant to specific industries, such as automotive (IATF 16949) or aerospace (AS9100).Environmental Compliance: Follow regulations such as RoHS and REACH to ensure environmentally friendly production. 9. Training and Skill DevelopmentQuality Control Training: Train staff on quality control procedures, inspection techniques, and testing protocols.Cross-Functional Collaboration: Encourage collaboration between production, engineering, and quality control teams to maintain consistency.Continuous Learning: Stay updated with the latest quality control technologies and methodologies. 10. Advanced Testing Equipment and TechnologyAutomated Testing Systems: Use automated torque testers, fatigue testers, and load testers for accurate and consistent results.Data Analytics: Leverage data from testing equipment to monitor trends, identify anomalies, and improve processes.Non-Destructive Testing (NDT): Employ techniques like ultrasonic testing or X-ray inspection to detect internal defects without damaging the spring. By implementing these rigorous quality control measures, Zhuji BossWinn ensures that every spiral spring delivers exceptional performance, reliability, and longevity, meeting the exacting demands of customers across various industries.Our quality control1. Incoming Material InspectionMaterial Verification: Ensure raw materials (e.g., stainless steel, carbon steel, or alloy) meet specified standards and certifications.Example: Tensile strength of stainless steel must be ≥ 700 MPa, and elongation ≥ 15%.Dimensional Checks: Verify material dimensions and tolerances before production begins.Example: Wire diameter tolerance of ±0.02 mm.Material Testing: Conduct tests for tensile strength, elasticity, and corrosion resistance to confirm material suitability.Example: Salt spray test for corrosion resistance must show no rust for ≥ 500 hours. 2. In-Process Quality ControlCoiling Precision: Monitor the coiling process to ensure consistent coil formation, pitch, and diameter.Example: Coil diameter tolerance of ±0.1 mm.Heat Treatment Monitoring: Validate heat treatment parameters (e.g., temperature, duration) to achieve desired mechanical properties.Example: Heat treatment at 400°C for 30 minutes to achieve optimal hardness (45-50 HRC).Surface Finish Inspection: Check for uniformity in coatings or finishes (e.g., plating, powder coating) to ensure corrosion resistance and aesthetics.Example: Coating thickness of 10-15 μm with no peeling or bubbles.Visual Inspections: Regularly inspect springs for defects such as cracks, burrs, or deformities during production.Example: Defect rate must be < 0.1% during in-process inspections. 3. Torque and Performance TestingTorque Measurement: Test the torque output of each spring to ensure it meets design specifications.Example: Torque output must be within ±5% of the design value (e.g., 10 Nm ± 0.5 Nm).Rotational Testing: Verify the spring's performance under rotational stress to ensure smooth operation within the required angular range.Example: Springs must rotate smoothly for 10,000 cycles without deviation in torque.Load Testing: Apply load to the spring to confirm it can handle the intended force without deformation or failure.Example: Springs must withstand a load of 50 N without permanent deformation. 4. Durability and Fatigue TestingCycle Testing: Simulate real-world usage by subjecting springs to repeated cycles of compression, extension, or rotation to assess longevity.Example: Springs must endure 100,000 cycles without failure.Fatigue Resistance: Evaluate the spring's ability to withstand stress over time without losing performance.Example: Fatigue life must exceed 1 million cycles under operational load.Environmental Testing: Test springs under varying conditions (e.g., temperature, humidity, corrosion) to ensure reliability in different environments.Example: Springs must operate flawlessly in temperatures ranging from -40°C to 120°C. 5. Final Inspection and Dimensional VerificationDimensional Accuracy: Use precision measuring tools (e.g., calipers, micrometers) to verify critical dimensions, such as inner/outer diameter, wire thickness, and free length.Example: Free length tolerance of ±0.5 mm.Visual and Surface Inspection: Conduct a final visual check for surface defects, scratches, or inconsistencies.Example: Surface defect rate must be < 0.05%.Functional Testing: Perform a final functional test to ensure the spring operates as intended in its application.Example: 100% functional testing for all springs before shipment. 6. Documentation and TraceabilityBatch Tracking: Maintain detailed records of each production batch, including material sources, production dates, and test results.Example: Each batch is assigned a unique ID for traceability.Certification: Provide certificates of compliance (e.g., ISO, RoHS) to demonstrate adherence to industry standards.Example: ISO 9001:2015 certification for quality management systems.Customer-Specific Documentation: Include detailed reports for customers, such as torque curves, test results, and inspection records.Example: Torque curves with data points for every 10° of rotation. 7. Customer Feedback and Continuous ImprovementCustomer Input: Gather feedback from customers to identify areas for improvement in design, performance, or quality.Example: Annual customer satisfaction survey with a target score of ≥ 95%.Root Cause Analysis: Investigate and address any defects or failures reported by customers.Example: Defect resolution within 48 hours of reporting.Process Optimization: Continuously refine production and quality control processes to enhance product quality and efficiency.Example: Annual reduction in defect rate by 5%. 8. Compliance with Industry StandardsISO Certification: Ensure all processes comply with ISO 9001 quality management standards.Industry-Specific Standards: Adhere to standards relevant to specific industries, such as automotive (IATF 16949) or aerospace (AS9100).Environmental Compliance: Follow regulations such as RoHS and REACH to ensure environmentally friendly production.Example: RoHS compliance for lead-free materials. 9. Training and Skill DevelopmentQuality Control Training: Train staff on quality control procedures, inspection techniques, and testing protocols.Example: Monthly training sessions for QC staff.Cross-Functional Collaboration: Encourage collaboration between production, engineering, and quality control teams to maintain consistency.Continuous Learning: Stay updated with the latest quality control technologies and methodologies.Example: Annual investment in QC technology upgrades. 10. Advanced Testing Equipment and TechnologyAutomated Testing Systems: Use automated torque testers, fatigue testers, and load testers for accurate and consistent results.Example: Automated torque testers with ±0.1 Nm accuracy.Data Analytics: Leverage data from testing equipment to monitor trends, identify anomalies, and improve processes.Example: Real-time monitoring of production defects using IoT-enabled devices.Non-Destructive Testing (NDT): Employ techniques like ultrasonic testing or X-ray inspection to detect internal defects without damaging the spring.Example: X-ray inspection for internal cracks with a resolution of 0.1 mm. By incorporating these detailed quality control measures and data-driven processes, Zhuji BossWinn ensures that every spiral spring meets the highest standards of precision, durability, and performance, delivering exceptional value to customers across industries. Packaging & Shipping ApplicationsSpiral torsion springs are one of the most commonly utilized types of flat springs, frequently serving as a practical alternative to traditional torsion springs. These springs function by rotating in circular motions, delivering a consistent and linear torque per revolution within the first 360 degrees of rotation. However, as the angular rotation extends beyond 360 degrees, the coils gradually tighten around the arbor, causing the torque per turn to increase significantly. This results in a nonlinear torque output, particularly as the rotation moves closer to the axis. Due to these unique mechanical properties, spiral torsion springs are ideally suited for applications that require precise torque delivery within a limited range of motion, typically less than 360 degrees of angular rotation.Key Features:Linear torque delivery within the first 360 degrees of rotation.Nonlinear torque increase at greater angular rotations as coils tighten.Compact design that maximizes efficiency in confined spaces.Durable and reliable performance for a wide range of applications.Common Applications:Rewind devices: Used in mechanisms that require controlled retraction, such as tape measures or hose reels.Office equipment: Found in printers, copiers, and other devices requiring precise rotational movement.Motors and generators: Provide torque and assist in rotational energy transfer.Counterbalances: Help balance loads in systems like garage doors or industrial machinery.Door closers: Ensure smooth and controlled closing of doors in residential and commercial settings.Electrical switchgear: Used in electrical systems to manage rotational force in switches and breakers.Home décor: Incorporated in decorative items like rotating displays or adjustable fixtures.Retracting devices: Essential in tools and equipment that require spring-loaded retraction mechanisms.Point-of-purchase displays: Enable rotating or moving components in retail displays to attract customer attention.Spiral torsion springs are a versatile and efficient solution for applications requiring controlled torque and limited rotational movement, making them a popular choice across various industries. Company Profile At Zhuji BossWinn, we specialize in delivering high-quality, precision-engineered solutions tailored to meet the diverse needs of industries worldwide. With a strong commitment to innovation, reliability, and excellence, we offer a comprehensive range of services designed to support your manufacturing and production requirements. Our expertise spans across multiple domains, including metal springs, CNC machining, and metal sheet fabrication and punching, ensuring that we provide end-to-end solutions for your most demanding projects.Our Core Services:Metal Springs ManufacturingWe design and produce a wide variety of metal springs, including compression springs, torsion springs, extension springs, and custom flat springs. Our springs are crafted with precision to meet exact specifications, ensuring optimal performance and durability for applications across industries such as automotive, aerospace, electronics, and more.CNC MachiningOur state-of-the-art CNC machining capabilities enable us to create complex, high-precision components with exceptional accuracy. Whether you require prototyping, small-batch production, or large-scale manufacturing, our advanced machinery and skilled technicians ensure that every part meets the highest standards of quality and consistency.Metal Sheet Fabrication and PunchingWe specialize in metal sheet fabrication and punching services, offering customized solutions for cutting, shaping, and forming metal sheets into precise components. Our advanced punching technology allows us to handle a wide range of materials and thicknesses, delivering cost-effective and efficient results for industries such as construction, electronics, and industrial equipment.At Zhuji BossWinn, we pride ourselves on our ability to combine cutting-edge technology with decades of industry experience to deliver solutions that exceed expectations. Whether you need a single prototype or large-scale production, our team is dedicated to providing reliable, high-quality services that drive your success. Partner with us to experience the perfect blend of innovation, precision, and craftsmanship.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...