IPDB › China Industry › Industrial Equipment & Components
China, Chinese Pneumatic Driver 8048014 Dfpd-20-RP-90-RS30-F05 Germany Original Delivery Fast1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Pneumatic ComponentPneumatic ActuatorDfpd-20-RP-90-RS30-F058048014
Shenzhen Warriorz Technology Co., Ltd.
Preview:
Product Description Product specifications and models are not all uploaded, if necessary, you can contact the online personnel. Look forward to hearing from you thank you. DFPD-20-RP-90-RS30-F058048014Technical DataSize of valve actuator20Flange hole patternF05Swivel angle90 degEnd-position adjustment range at 0°-5 deg ... 5 degEnd-position adjustment range at nominal swivel angle-5 deg ... 5 degShaft connection depth12 mmFitting connection conforms to standardISO 5211Mounting positionoptionalMode of operationSingle-actingDesignRack and pinionClosing directionCloses to the rightSymbol00991266Valve connection conforms to standardVDI/VDE 3845 (NAMUR)Connection point for positioner and position sensor conforms to standardVDI/VDE 3845 size AA 1Device type according to VDMA 66413Safety deviceSafety functionThe safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is realised by the spring force of the spring assembly.Safety Integrity Level (SIL)To SIL 2 Low Demand mode Up to SIL 3 in a redundant architecture Up to SIL 1 high demand modeCertified for safety function to ISO 13849 and IEC 61508 (SIL)Product can be used in SRP/CS up to SIL 2 (Low Demand) Product can be used in SRP/CS up to SIL 1 (High Demand) Up to SIL 3 in a redundant architectureOperating pressure0.2 MPa ... 0.8 MPaOperating pressure2 bar ... 8 barOperating pressure29 psi ... 116 psiNominal operating pressure0.3 MPaNominal operating pressure3 barNominal operating pressure43.5 psiMaritime classificationSee certificateCE mark (see declaration of conformity)To EU Explosion Protection Directive (ATEX)CE marking (see declaration of conformity)To UK EX instructionsExplosion protection certification outside the EUEPL Db (GB) EPL Gb (GB)Explosion protectionZone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX)Certificate issuing authorityDNV TAP00001CE German Technical Control Board (TüV) Rheinland 968/V 1106.01/2023ATEX category gasII 2GATEX category dustII 2DExplosion ignition protection type for gasEx h IIC T4 Gb XExplosion ignition protection type for dustEx h IIIC T105°C Db XExplosion ambient temperature-20°C <= Ta <= +80°COperating mediumCompressed air to ISO 8573-1:2010 [7:4:4]Note on operating and pilot mediumDew point at least 10 °C below the ambient temperature and temperature of the medium Lubricated operation possible (in which case lubricated operation will always be required)LABS (PWIS) conformityVDMA24364-B1/B2-LStorage temperature-20 °C ... 60 °CAmbient temperature-20 °C ... 80 °CTorque at nominal operating pressure and 0° swivel angle7.4 NmTorque at nominal operating pressure and 90° swivel angle3.8 NmNote on torqueThe operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling.Spring return torque at 0° swivel angle3.6 NmSpring return torque at 90° swivel angle7.1 NmMean time to dangerous failure (MTTFd)1126 yearsProbability of Failure per Hour (PFH)1.01E-7Probability of Failure on Demand (PFD)7.8E-4Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0°0.8 lProduct weight1371 gShaft connectionT11Pneumatic connectionG1/8Note on materialsRoHS-compliantMaterial sub-baseAnodised wrought aluminium alloyMaterial coverDie-cast aluminium, coatedMaterial sealsNBRMaterial springSpring steelMaterial housingAnodised wrought aluminium alloyMaterial pistonDie-cast aluminiumMaterial bearingPOMMaterial camHigh-alloy stainless steelMaterial screwsHigh-alloy stainless steelMaterial shaftNickel-plated steel
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...