IPDB › China Industry › Metallurgy, Mineral & Energy
China, Chinese PVC Cooling Tower Filler Color Is Blue1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Refractory MaterialSpecial Refractory MaterialPVC Cooling Tower FillerPVC Filler
AMK Metallurgical Machinery Group Co., Ltd.
Preview:
Product Description Specifications:PVC cooling tower filler Block Size: 1 x 1 x 0.5 Meter Thickness: 0.35mmColor: blue/blackType: S waveMaterial: PVC new Sheet space: 33mmCooling tower filler is the most important part of the cooling tower, and its efficiency depends on the degree to which the cooling water is in full contact with the air in the packing. The company's fillers are temperature resistant to 50 °C ~ 68 °C, anti-aging, excellent performance, ultraviolet resistance and long life. The advantages are as follows: 1. Good performance, high cooling efficiency, the filler is a thin film type, and the protruding fine corrugation makes the water contact surface larger. The filler is placed in 3~4 layers, and there is a hot water redistribution process between the layers.2. The filler with good hydrophilicity and low ventilation resistance, rough surface and smoother plane has good hydrophilicity, and the water absorption rate is less than 0.015%, so that more water flows to form a film without splashing, so that water and air are more fully in contact and at the same time, the surface disturbance of water and air is large when flowing. After the packing is assembled, the air inlet surface is a honeycomb-shaped deflector, which has a good air distribution effect and improves and stabilizes the heat exchange intensity of water and gas. The inlet end is tilted at an angle of 30°, which effectively reduces the drifting loss. At the end of the filler, a water collector designed according to the impact separation method is arranged, so that the drifting loss is effectively controlled within 1/100,000.3. The core material of the series cooling tower is made of high-quality PVC polyethylene sheetDue to the use of trapezoidal wave filler, the heat dissipation area growth coefficient is large, the water flow on the board surface has good distribution performance, and the water and air flow through the board surface when the disturbance is large. The filler is not easy to deform, high temperature resistance, anti-aging, and has good flame retardant performance and small drag coefficient. Easy to install, easy to clean, easy to transport The heat dissipation packing adopts non-adhesive hanging type, easy to install, easy to clean, and successfully solves the problem that the adhesive packing is deformed due to accretion and self-weight, and the scale accumulation is more serious and difficult to clean after deformation. The flame retardant performance of the filler is good, and the flame retardant oxygen index index is 44.7.4. The heat dissipation of the packing accounts for more than 85% of the entire temperature drop in the cross-flow tower. The heat dissipation process of the cooling tower is mainly carried out on the surface of the heat dissipation packing plate, the water film on the surface of the packing flows down slowly, and the innermost water film is the humidity of 100% of the high enthalpy humidity of humid humid air, and the water molecules run from the high enthalpy value area to the low enthalpy value of the fresh air entering the tower, so that the enthalpy value of the air out of the tower increases. As the concentration of water molecules decreases, the water molecules in the circulating hot water continue to evaporate from liquid to gaseous state, thus taking away the latent heat of vapor. According to the above principle, the quality of the filler is the key to the refrigeration effect. The packing of Yuanxin brand cooling tower meets the requirements of the fourth generation of packing in the world: large disturbance/three-dimensional three-dimensional deformation/accurate positioning; The static pressure loss is small, and the negative force of the airflow is small; Long water flow time (3000mm high); The contact area is large, and the area growth coefficient is large; Uniform distribution of water and air (the air inlet has a honeycomb-shaped wind distribution device, so that the tower will not produce uneven wind distribution due to uneven sheet spacing, and the evenly distributed wind load makes the heat dissipation packing area of the tower be effectively used; No deformation; not broken; Good water-binding; High intensity; Low noise and low water drift; long life; It does not breed moss, because of the three-dimensional characteristics of the honeycomb air inlet, most of the sunlight cannot penetrate the surface of the tower packing, so it is difficult to grow moss on the surface of the packing
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...