IPDB › China Industry › Chemicals
China, Chinese Two-Component Epoxy Water Based Paint for Transmission Shaft Anti-Corrosion Protection1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Paint CoatingAppliance PaintWater CoatingWater Paint
Kinte Materials Science and Technology Co., Ltd.
Preview:
Product Description Waterborne Two-component Epoxy Resins Paints for Automobile Steering Column Anti-corrosionIntroductionAE-29003A is composed of water-based modified epoxy resin, polyamine curing agent, deionized water, water-based additives, co-solvents, environmental protection pigments, fillers, etc. It is widely used in the coating of the surface of metal substrates used in transmission shafts, shock absorbers, steering columns and other products. It plays a very good role in decoration and anti-corrosion protection. It is suitable for manual spraying and DISC electrostatic spraying.Waterborne epoxy coatings have many advantages:1. Excellent adhesion2. Variety diversity and wide adaptability3. Antirust performance4. Excellent resistance5. High security6. Environmentally friendlyFeaturesNo irritating smell.It meets the DISC electrostatic spraying process and has good construction adaptability.After curing, the paint film has excellent abrasion resistance, stacking resistance, neutral salt spray, impact resistance and chemical resistance.The products meet the standards of toxic and harmful substances in auto parts.Film Properties:Test Item ResultDrying time (25oC)Surface dry time: 1h;Ultimate dry time: 24hFully cured in 7 daysUsing drier: 80-90oC×30minAdhesive (scratch)Grade 1Pencil hardness (HB)HImpact (50kg?cm)PassFlexibility1mmCorrosion resistance>360hWater resistance>300h Instructions Composition Component A (black liquid) Specific gravity 1.33±0.05 Component B (brown liquid) Specific gravity 1.01±0.03Mix proportionWeight ratioComponent A:B = 6:1Volume ratioComponent A:B = 4.5:1Mass solid content (105oC×3h)45±5%Mix methodAfter mixing component A, add component B and fully mix evenlyCoating thicknessDry film thickness30-50μmWet film thickness180μmDiluentDeionized water, add about 0~10%Curing period(25oC)--Pot-life(25oC)2hRecoating intervalMinimum 4h Maximum 48hPretreatment of substrateWhen directly applied to the surface of the substrate, the substrate should be treated with phosphating, vitrification, and silanization, and it must be clean, dry, rust-free, and oil-free.Substrate temperatureSubstrate temperature should be higher than dew point by 3oCConstruction ConditionsThe construction temperature is 10-35oC, the humidity is 30-75%, and the ventilation conditions are good.For construction in winter, it is recommended to preheat the workpiece and use hot air circulation to increase the surface temperature of the workpiece. Infrared heating can be used.ProcessSubstrate - Rust removal, degreasing, dust removal, phosphating, si-lane, vitrification treatment - Moisture drying - Spraying water-based paint - Leveling at room temperature for 5-10 minutes - Gradient heating, 90-100 degrees 30 minute artifact - Off-line packagingCoating methodDISC electrostatic spraying:Spraying voltage: 50 ~ 60 kVSpraying pressure: 0.35-0.45MpaConstruction viscosity: 16-20s (25-30oC)Hand spraying:Construction viscosity: 35-43s (25-30oC)Applicable substrate:Suitable for cast iron, galvanized sheet, carbon steel, cast aluminum and other metal substratesCleanWash tools and equipment with clean water immediately after constructionStorage lifeThe storage period of the paint is six months, please be sure to use it up within the storage period, so as not to affect the quality; the paint (including curing agent, thinner) should be sealed and stored in a cool place, waterproof, leakproof, sunscreen, high temperature, and away from fire .PackageComponent A: 18kg/barrel Component B: 3.0kg/barrel Precautions (1) The surface of the object to be coated must be clean and dry, and the surface treatment of the substrate must meet the requirements.(2) Part A and curing agent should be formulated strictly according to the volume ratio of 4.5:1 (or weight ratio of 6:1), diluted with 0-10% deionized water, aged for 10 minutes, and used within the applicable period The pot life is 2 hours at 25°C, and the higher the temperature, the shorter the pot life.(3) The tools used in construction must be kept dry and clean.(4) It is strictly forbidden to contact with acid, alkali, oily paint, organic solvent, etc. during the process of paint preparation and coating.(5) The film formation at one time should not be too thick, and the dry film exceeding 60 μm is prone to sagging(6) During construction and drying and curing, the relative humidity should be ≤75%, and the temperature should be ≥10°C, otherwise the paint film cannot be fully cured and has no performance.(7) Avoid contact with organic solvents and water before the paint film is completely dry, and do not press or rub heavily to avoid damage to the paint film.(8) Keep good ventilation at the construction site and wear necessary protective equipment.(9) In order to achieve sagging resistance, when the ambient temperature is lower than 10°C, it is recommended to preheat the workpiece, and the optimum coating temperature on the surface of the workpiece is greater than 20°C; at the same time, increase the wind speed in the spraying workshop, and introduce hot air circulation in winter , to ensure that the wind speed reaches 0.5m3/s. Health and safety (1) The paint is a water-based product, and there is no health hazard in normal use.(2) It must be well ventilated when in use.(3) Avoid excessive skin contact.Company Profile:Kinte Materials Science and Technology Co., Ltd. is subordinate to China Machinery Industry Corporation (a key state-owned enterprise directly managed by SASAC, ranking 284 among the world's top 500 in 2021). It is a national high-tech enterprise under China National Electric Apparatus Research Institute Co., Ltd. (Stock Code: 688128), a listed enterprise on the SSE STAR MARKET. Focusing on the R & D, production, and sales of environmentally friendly coatings (powder coatings, waterborne industrial coatings) and powder coating resins, the company is committed to improving the global market competitiveness of China's environmentally friendly coating industry. Now it has become the leader and promoter in China's technological development of environmentally friendly coatings as well as polyester resins for powder coatings! We have gained ISO9001 and ISO14000, ISO18001, RoHS, UL certification and QUALICOAT Certificate. Due to the excellent and stable quality, our products always enjoy high reputation at home and oversea, and were sold to more than 30 countries. Our clients include many top air conditioning manufacturers in the world such as GREE, Midea, TICA, TRANE, etc.We unremittingly stick at the business principle of "Quality is the life, adhere to first-class technology, first-class quality, first-class cost and first-class brand". We would like to provide a complete set of services and solutions for both domestic and abroad customers and would like to go forward to brilliant future with you together.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...