IPDB › China Industry › Tools & Hardware
China, Chinese (CN100) Pneumatic Coil Nailer for Packaging, Construction, Pallet1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Pneumatic ToolsPneumatic Nail GunConstructionPalletNailerNail Gun
Changzhou Kya Trading Co., Ltd.
Preview:
Product Description Product Description Name Coil Nailer Specification CN100 Weight 5.35kgs Load Capacity 150-300PCS nails Operating Pressure 70-120psi(5-8.3kgs/cm2) Fasteners 15° Flat wire welded coil nailsFasteners Length 65mm-100mmShank 2.5mm-3.33mm Nails Head6.5mm-7.5mmNail Pitch8.0mmCustomizedCustomized is available if you provide a sample or drawingOEM ServiceAvailableFeatures: Most powerful tool in its class, able to countersink nails into hard oak pallet. Durable aluminum frame and cylinder cap. Well balanced when hung on balancer. Down wards directional exhaust. Built in silencer to reduce noise level. Comfortable rubber grip. Big magazine allows extra nail capacity.Usage1.Making pallets and crates.2.Decking.3.Framing.4.Export boxes packing.5.Hard wooden boards.6.Window trim.7.Cabinet framing.8.Floor boards.9.Wall framing.10.Sheathing.11.Siding and so on. Service and Repars: No. SymptomProblemsSolutions1.1Air Leak Air leak in the cylinder cap when tools don't work 1.Loose head valve piston seal or o-rings .Check and replace the head valve piston set2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap Check and replace o-ring or cylinder cap gasket under the cylinder cap1.2Air leak in Trigger area when tools don't work1.Damaged o-ring in trigger valve Check and replace o-ring2.Damaged o-ring in trigger valve stem Check and replace o-ring3.Dirt in the trigger valveCheck and clean the trigger valve1.3Air leak in cylinder cap when tools are working 1.Damaged head valve piston o-ringsCheck and replace o-rings2.Damaged seal under cylinder cap Check and replace seal1.4Air leak in nose when tools are working 1.Worn or damaged bumperCheck and replace bumper2.Loose driver(piston unit) threadCheck and replace driver(piston unit) 1.5Air leak in Trigger area when tools are working1.Worn or damaged trigger valve headCheck and replace trigger valve head2.Damaged head valve piston o-ringsCheck and replace head valve piston o-rings2Failed to get driver(piston unit) back to the correct position completely.1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled.Straighten the driver(piston unit) or verify driver guide(nose) and magazine 2.Worn or damaged nozzle Check and replace nozzle 3.The space between piston o-ring and cylinder is too tight.Check if the cylinder is adequate lubrication or replace the o-ring on the piston.3Work weakly and sluggishly1. Worn or damaged piston o-ring Check and replace piston o-ring 2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings3.Dirt in the nozzleCheck and clean the nozzle4Tool jams frequently1.Damaged or Worn driver (piston unit)Check and replace driver (piston unit)2.Damaged or Worn driver guide (nose)Check and replace driver guide (nose)3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too bigCheck and replace driver guide cover 5Nail can not be shot1. Driver (piston unit) can't return to the correct position.Refer to no. 1 Symptom2.Driver guide(nose) can not match magazine wellCheck and correct the position between driver guide(nose) and magazine 3.Worn or damaged nail pusher compression spring Check and replace nail pusher compression spring FAQ1.Q:Do you have your own production factory? A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China2.Q: Can you send us samples? A: We are pleased to send you the sample to test the quality and market. 3.Q: About your products, could you do it OEM? A: Yes, OEM service is available. 4.Q: Do you also provide spare parts of pneumatic tools? A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts. 5.Q: For the product, could you spray other color of painting? A: Yes, color can be customized. 6.Q: What's the delivery time? A: It usually takes about 20-30 working days to produce one order. 7.Q: How is the payment terms? A: Normally T/T 30% in advance and T/T 70% before shipment. 8.Q: Can I mix different models in one container? A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ. 9.Q: How does your factory do regarding quality control? A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery. 10.Q: Do you have quality certification? A: Yes, we have CE, SGS,ISO, ect. Company Profile
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...