IPDB › China Industry › Chemicals
China, Chinese Teaching 3D Filament 3D Printers Pcl Filament Low Temperature Reshaping Materials 3D Pen Idrawing Kids Filament 1.75mm Green 1kg1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Printer Printer Supplies3D Printer Material3D Idrawing Low Melting Tem Filament3D Pen Printing Reshaping Filament
Guangzhou Yousu3D Technology Co., Ltd.
Preview:
Product Description Description[Pearlescent, gorgeous surface] - Without polishing, you can get pearlescent & gorgeous printing surface. Unique based recipe assures less stringing and better overhang performance.Silk color obtained by light refraction. The color maybe different with the picture and different temperature setting will impact final silk result[100% non-knotted] - Perfect filament winding that compatible with the most FDM/FFF 3D printers. You don't need to bear printing failure after 8 hours printing or more due to tangle issue.[No warping & Good Layer Bonding] - Excellent first layer adhesion to reduce warpage, shrinkage, curl and print failure. Good layer bonding strength make the printing parts stronger.[Purity material & Precision Diameter] - avoid print failure jam or clog and making you a smoothly printing & better surface.[Technical support available] - Every buyer can get a pdf version instruction. We can support on how to use our material on yourprinter. Contact us if you have any doubt or problem.REPRAPPER PLA 1.75mm 3D printing filament is one of the best, most consistent and most tested PLA filament that compatible with MakerBot 3D printer, UP 3D printer, Afinia 3D printer, solidoodle 3D printer.Specification:3D printer filament parameterDataMaterialPCLColorGreenDiameter1.75 ±0.02Tolerance+/-0.03mmPrinting temperature200~250oCNet weight1kgLength350MPrint Speed50-100mm/sPackageVacuum sealed, individual box Features:Straw spool which more environmental friendly and nice appearance. We are the only one with this spool over the world.Filament function not only compatible all 1.75mm 3D printer without lock key, the spool size also suitable for MakerBot replicator 5th generation. Why Flex?There are some reasons why you need Wood.Flexible and Compressible surfuce.Can be printed with large size without wrapping.Environmental friendly that can be biodegrading.Applicability:RepRapper Flex 3D printing filament compatible with MakerBot 3D printer, UP 3D printer, Afinia 3D printer, Solidoodle 3D printer etc who without lock key of their filament with 1.75mm diameter. Why us?1) Direct manufacturer, top 3D printer supplier's top choice.2) With reputation of innovation on 3D printer field over the world.3) Not only tight quality control on products itself, the more important is the systematic quality control on the whole supply chain.4) Fast delivery. Ship out products within 5 days for all color and material if less than 1000 kg.5) Spool can be customization but need longer time.6) Accept OEM/ODM over the world for large order.7) Unconditional return(Buyer need afford delivery cost if no quality issue) Though we recommend you using REPRAPPER brand filament, but not means you must buy from us directly. We also recommend you buy our reseller in your local region to save the deliver cost. Of course buying from us also welcome. In order to get a successful printing journey, you can view the following tips for reference.Tips:How to get a perfect printing model?In fact you want to get a perfect printing model, you need a reliable printer with the 3D printer at right temperature under right parameter setting. It means that your printer should under good condition; your filament should be good enough. The following tips are based on this question.Tip 1: What is your idea printing temperature?In fact different printer series and different printer sensor has different temperature tolerance. Regardless sensor difference, the printing temperature of REPRAPPER ABS filament is 200~260oC, the idea temperature is 230oC. Different color has little variance. The printing temperature of REPRAPPER PLA filament is 170~240oC, the idea temperature is 210oC. Different color has little variance.For UP and Afinia printer, you can use it directly under ABS or PLA mode (Depends on what material you bought). For Makerbot etc printer that allows you change the temperature, you can set a temperature (e.g. 230oC), then extrude the filament manually before printing. If you saw the filament can flow up smoothly without bubble, it means that temperature is ideal setting.Tips 2 How to avoid printing parts tilt?It is very important for the first layer. You want to get a successful printing model you need to assure the platform is leverage. If the platform is not leverage the probability of tilt will increase. Before you begin your job you need to confirm the nozzle to all platform distance is the same.The filament can be stick on ABS board/ solderless breadboard/3M 2090 tape/Kapton tape etc.When you printing, the closer between nozzle to platform the better but should not break the platform.Tips 3. How to avoid PLA jam at nozzle?We have study on this. The printing temperature and extruder design are critical on this. If print at high temperature, the PLA will soft and the extruder can not push the soft melt PLA out of nozzle because the filament will not strong enough to push the melted PLA. It will bent. The extruder design also very important, if the inner surface is not smoothly enough or the diameter is not big enough, it will cause the same issue. It is not relate with filament itself. At least our filament can get good printing results.Tips 4. How to avoid printing failure?Before you begin your job, you need to confirm:1) The filament is good, no clog and with consistence diameter. Wired well. 2) The filament feed system can feed the filament smoothly to avoid lack of filament in the extruder during printing.During printing you need to confirm:1) The temperature is ideal and the extruded filament at nozzle is smoothly without bubble.2) The first layer is OK as mentioned above.If you avoid these issue but your still print failure parts, it may caused by your printer's reliability. According our experience, the distinguish of a good printer or bad printer is their reliability. For FDM mode printer, for one or two model, all printing results is similar regard the surface. But when print 100 times will them success 100 times is the make difference point. For example, for Z axis movement, if your setting is 0.2mm, will they move 0.2mm exactly? If higher than 0.2mm the extruded filament may not stick to the near bottom printing model. If less than 0.2mm it may make the nozzle touch the printed model. Both of that will cause failure printing. Now starting your 3D printing journey!Company ProfileOur company aims to be a world class level 3D printer consumable supplier. We are a company full of innovation. As for 3D consumables, we are the first one developing conductive filament and color change by temperature filament all over the world.Nowadays, we are the leading company which can supply ABS, PLA, PC, POM, nylon, wood filament. We have normal color series,fluorescence series, glow in the dark series, color changed by temperature series. All of our products meet RoHS criteria and get related certificate by SGS. Our plant has passed ISO9001 certificate. Innovation/Quality/Service/Valued products are embodied in our team. We are a company combining with strategy systematic methodology and problem solving method. Our company adopts Six Sigma as their strategy. All of us believe the function and 100% execution. As a result, we can do better quality, better price and service to our consumers. Our business mode is flexible. We have our own brand. We can also do OEM and ODM for large orders. Our goal is to accelerate technology evolution in 3D printer area. Yousu builds reseller channel over the world. We are sincerelyinviting you to be our partner to develop 3D printer future.FAQ:Q: Is Yousu Silk PLA filament tangle free? I've had issues with clogging with another brand I used.A: You can see from our picture,the filament was neatly coiled on the transparent spool,anyone if he use the right settings on his 3d printer,clog-free,buble-free, excellent adherence, no warping.Q: What is a good temperature to print this at? does it use the same settings as normal pla?A: Yes it is the same as normal PLA filament. The difference between PLA+ and PLA is, Silk PLAhas better mechanical performance.Tougher and not easy to be broken.Our unique recipe of our Silk PLA aims to make the 3d printing parts as strong as injected parts.But regarding to the settings, temperature is the basic setting. You also need several settings in your cura, repetier host etcslicing software. Usually you set 200C printing temperature, 1.75mm and give some retration, and keep others as default should be ok. If this can not satisfy you, then you can print a temperature tower or send support request to us. We will find ways to solve your issue.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...