IPDB › China Industry › Metallurgy, Mineral & Energy
China, Chinese High Temperature Inorganic Glue for Ceramic and Aluminosilicate1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Refractory MaterialSpecial Refractory MaterialHigh Temperature AdhesiveInorganic Binders
Shanghai Yunnuo Industrial Co., Ltd.
Preview:
Product Description Property of condensateC-2C-3CPS cupric oxideColorgraygrayblackHeat resistant temperature C17301460980HardnessHard,brittleHard,brittleHard,brittleElectrical propertiesGood insulation performance at high temperatureGood insulation performance at high temperatureGood insulation at room temperatureMedium resistanceOil resistant, acid and alkali resistant, not resistant to boiling waterOil resistant, acid and alkali resistant, not resistant to boiling waterOil resistant, acid and alkali resistant, not resistant to boiling waterCoefficient of linear expansionSimilar to ceramic(80×10-6/C)Similar to steel(12.9×10-6/C)Close to steel,Slightly contractedSocket strength / tensile strength (steel-steel)Mpa82/3779/3496/-Applied rangeHigh-temperature instrumentation, electronics, temperature-measuring element coating and potting, high-temperature anti-oxidationcoating of metal materials, ceramics and other high-temperature bondingBonding and potting of high temperature resistant metal parts, high temperature oxidation resistant coating of metal materials,high temperature resistant bonding of metal materialsMetal sleeve sticking,the bonding of tool measuring toolsProportion of glue solid phase1.6-2.5g1.6-2.5g3.5-5.5gProportion of glue liquid phase1ml(about 1.39g)1ml(about 1.39g)1ml (about 1.7g)Curing proceduresRoom temperature 12-24 hours → 80C 2 hours → 150C 2 hours, cool slowlyRoom temperature 12-24 hours → 80C 2 hours → 150C 2 hours, cool slowlySlow heating,→ 80C 2 hours → 150C 2 hours, cool slowlyNet weight500g500g750gHT-CPS high temperature structural adhesivePhysical state: powder + liquidOperating time: 30minCuring conditions: 1. room temperature 12h; 2.80 C 2h; 3.150 C 2hColour: BlackDensity (g/cm3): 3.5Shear strength (MPa) GB / T7124-1999: 86 (socket)Impact strength (J / cm2) GB / T6328-1986: 8Tensile strength (MPa) GB / T6329-1996: 38.5Peel strength (N / cm) GB / T2791-1981: ---Working temperature (C): -196 ~ 980Heat-resistant temperature: 980 oCWeight: 750g per groupMaterial: Inorganic copper oxide, temperature resistance 980 oC.Uses: Used for bonding various hard alloy and ceramic turning tools, milling cutters, drills or gear cutters. The socket strengthis extremely high, which can be used to make extension rods and repair defects in high temperature casting conditions.Use operation1. Roughen the bonding surface and remove rust, oil and grease. The joint design is best with socket.2. Glue adjustment: The solid and liquid phases of various types of glue are adjusted according to the ratio of the technical index table, and it should be adjusted to a uniform and flowable paste. CPS copper oxide inorganic glue should not be excessively adjusted each time. It is best to adjust the glue on the containers (such as copper) that dissipate quickly.3. Curing with glueApply (fill) the glue to the surface to be bonded (sealed), and apply a little contact pressure to cure it after assembly. If thestrength is not high and medium resistance is not required, it can be cured at room temperature. Otherwise, please follow the curing procedure of the technical specification table. Product name: HT C-2 ultra high temperature repair agentPhysical state: solid+liquidOperating time: 30minCuring conditions: 1.) Room temperature 12h; 2.) 80C -150C 2h; 3.) Slow coolingColor: off-whiteDensity (g /cm3): 1.4Compressive strength (MPa) GB / T1041-1992: 82 (socket strength)Shear strength (MPa) GB / T7124-1999: 37 (tensile strength)Bending strength (MPa) GB / T1024-1992:-Insulation strength (kv / mm) GB / T2411-1980: 30Working temperature (C): -60 ~ 1730Net weight: 500g two-componentUses: Inorganic ceramic material, temperature resistance 1730 C. It can repair equipment working under high temperatureconditions, such as repairing damaged or broken acid resistant tanks, blast furnace lining, steel ingot molds and other equipment,burner ignition devices, potting of molten steel temperature probes, etc.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...