IPDB › China Industry › Instruments & Meters
China, Chinese Tvac Test Chamber Thermal Vacuum Test Chamber1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Test InstrumentEnvironmental Test ChamberThermal Vacuum Test ChamberVacuum Thermal Chamber
Dongguan Huanyi Instrument Technology Co., Ltd.
Preview:
Product Description ApplicationThermal vacuum test chamber is mainly used as a ground test to simulate the vacuum, cold black and solar radiation environment of spacecraft in space. This kind of test is performed on single machines (components), subsystems and the entire spacecraft. During the simulation test, the specimen is mostly in working condition and its working parameters and environmental parameters are measured.A ground test that simulates the vacuum, cold darkness and solar radiation environment of a spacecraft in space. This test is performed on individual machines (components), subsystems and the entire spacecraft. During the simulation test, the specimen is mostly in working condition and its working parameters and environmental parameters are measured.Vacuum environment simulationThe vacuum degree of the environment where the spacecraft is located is 13.3~13.3×10-10 mPa (10-4~10-14 mmHg). From the perspective of heat transfer, the vacuum degree of 13.3 mPa is sufficient for the spacecraft. Need for simulation of thermophysical properties effects. In order to save test costs, the vacuum degree used in thermal vacuum testing is usually set to be better than 13.3 mPa. In order to assess and study the dry friction and cold welding performance of certain moving parts and extension mechanisms, and to study the sublimation, weight loss, aging and other effects of materials under vacuum conditions, it is necessary to use a combination of higher vacuum and other space environmental factors. When the test is carried out, a vacuum degree of 13.3×10-1~13.3×10-10 mPa (10-5~10-14 mmHg) can be obtained in a small and medium-sized space simulator.Cold and dark environment simulationThe thermal background temperature of the universe is 4K and the absorption coefficient is 1, which is equivalent to an ideal black body. When simulating this heat sink effect on the ground, a black radiation screen cooled by liquid nitrogen is usually used. The simulated temperature of the screen is lower than 100K and the absorption coefficient is greater than 0.9. When the characteristic size ratio between the simulation chamber and the spacecraft is greater than 2:1, the thermal simulation error is less than 1%, and such errors can be corrected through theoretical calculations. For the calibration test of the remote sensor, the background temperature of the heat sink should be lower than 20K.Solar irradiation simulationSolar electromagnetic radiation is equivalent to a 6000K black body radiation and is the main external heat source of the spacecraft. Earth-circling spacecraft are also subject to Earth albedo and Earth infrared radiation in orbit. Solar simulators usually use carbon arc lamps or high-voltage short-arc xenon lamps as light sources, and are equipped with off-axis, coaxial or divergent optical systems to create a certain irradiation intensity, spectrum, uniformity and collimation angle to simulate sunlight. intensity and energy spectrum distribution. Since the manufacturing and testing of solar simulators are very expensive, heat flux simulation methods are often used instead of solar simulations for most spacecraft with less complex shapes. The heaters used include infrared heaters, quartz lamp arrays, cage resistance sheets, patch resistance heaters, electric heating tubes and their combinations. The disadvantage of this method is that it cannot simulate the energy spectrum and collimation of sunlight. For spacecraft with complex shapes and special components such as solar cell wings, solar sensors, and large antenna structures, solar simulators are still needed for irradiation tests.Meet the standardsStandards for thermal vacuum testing:"GJB 3758-99 Thermal Simulation Method for Satellite Vacuum Thermal Test"At present, there are very few laboratories that can conduct thermal vacuum tests. They mainly include the Environmental Reliability and Electromagnetic Compatibility Test Center, the Aerospace Environmental Reliability Test and Inspection Center, etc. Product ParametersCompany ProfileFAQ1.Q :How to provide after-sales service?A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.2.Q: Can we visit and study in your factory?A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.3.Q :Can I install and commission the calibration equipment on site?A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.4.Q: What are the transportation methods?A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.5.Q : What are the packing methods?A: Standard export wooden box packaging, solid and firm.6.Q :How do you calibrate the equipment?A: We have our own calibration and third-party calibration.7.Q :What are the payment methods?A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.8.Q :How long is the warranty period?A :Warranty is 1 year, lifetime free service.9.Q :What is the delivery time for your company's products?A :This depends on the actual product you order, usually at least 30 days.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...