IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese Wood Impregnation Dying Timber Treatment Autoclave Machine1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Woodworking MachineryCarbonization FurnaceWood Impregnation Treatment AutoclaveTimber Treatment Autoclave Machine
Qingdao Evertech Industry Co., Ltd.
Preview:
Product Description Wood Impregnation Dying Timber Treatment Autoclave MachineProduct Description Product ParametersModelOversize(mm)DiameterLengthCapacityD.Pre.D.TempVoltageLWH(mm)(mm)(m3)(Mpa)(0C)(V)DL1-8A.2900016002000100080006.281.0-0.098380DL1.5-8A.29000210025001500800014.11.0-0.098380DL1.7-8A.29000230027001700800018.11.0-0.098380DL1.7-12A.2130002300270017001200027.21.0-0.098380Wood Treatment And Preservation Equipment Vacuum Impregnation Autoclaves can achieve wood dyeing, anticorrosion, drying,degreasing, drying, degreasing, flame retardant, moth-proof and other technological requirements, is an important production equipment in wood building materials processing and furniture plate production.1. Initial vacuum: we need to keep the tank vacuum before filling of the wood preservative. And it will make the wood preservative into wood cells better. The vacuum degree is -79.8~90kpa and the vacuum time is according to different product(normally 15-60 minutes). when the cylinder in vacuum state, a part of air in the wood was taken out, the resistance will reduce when the wood preservative pushed into wood, so the wood preservative will be easy to get into wood cell. 2. Filling of preservative into tank: Add the wood preservative by manual valve when the equipment in vacuum state, to make sure the air which in the same condition was stopped in the wood cells. (the degree of vacuum is up to the size of valve) 3. Boost pressure stage: Begin to boost pressure lowly to 1.0-1.4MPa when the preservative is full of wood tank ,then keep the pressure value until the regulation preservative into the wood. 4. Pressure relief and discharge preservative: Discharge the pressure after the regulation preservative is absorbed. There will be a little recoil phenomenon(5-15%) during the process. 5. Final vacuum: Pumping air from the tank to keep the tank vacuum after the preservative discharged from the tank. The purpose is to extract excess wood preservative to reduce the phenomenon of oil dripping. 6. Recover atmosphere, then open the door and take out of timbers. We have three production lines to meet customers' requirements ,more than 20 senior engineers to design ,skillful welder to process the equipment ,24hours after-sales team to support. Our products have been sold to Russia, French, Peru, Uganda, Tanzania, Kenya and Burma.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...