IPDB › China Industry › Industrial Equipment & Components
China, Chinese Advanced Treatment of Wastewater From Sewage Treatment Plants1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Chemical Auxiliary CatalystWater Treatment ChemicalWastewater TreatmentCod Removal
Shandong Longantai Environmental Protection Sci-Tech Co., Ltd.
Preview:
Product Description Performance Indicators MBR sewage treatment is a common method of modern sewage treatment. It uses membrane bioreactor (MBR) technology, which is a new technology that combines biological treatment technology with membrane separation technology. It replaces the secondary sedimentation tank in the traditional process. It can efficiently separate solids and liquids to obtain stable reclaimed water for direct use. It can also maintain a high concentration of microorganisms in the biological pool, with less process residual sludge, and extremely effectively remove nitrogen. The suspended solids and turbidity of the effluent are close to zero, and the bacteria and viruses in the effluent are greatly removed. It has low energy consumption and small footprint. By fixing a special catalyst in a special reaction vessel, it is a new technology that combines the functions of homogeneous chemical oxidation, heterogeneous chemical oxidation, fluid bed crystallization and ferrite reduction and dissolution. This reactor improves the traditional Fenton oxidation method and requires only a lower dosage of reagents and a lower sludge output than the Fenton stirring and mixing reaction.Technical advantagesBy adopting this reactor system, most of the Fe3+ produced by the Fenton process is attached to the surface of the Fenton carrier in the fluidized bed in the form of crystals. The crystallized Fe3+ iron salt forms a synergistic effect with the Fenton system and is converted into Fe2+ over and over again. This can greatly reduce the amount of chemical sludge produced by the dosage of the traditional Fenton process, reduce the amount of added by more than 20%, the amount of Fe2+ added by more than 50%, and the amount of sludge by more than 40%, effectively increasing the COD removal rate by more than 10%, and saving 30% to 50% of the treatment and operation costs.Product Images Technical Parameters NumberModelProportion(T/m3)PorosityParticle strength(kgf/cm2)Particle size(cm)Catalytic form1LEMBR-011.3~1.6≥65%≥6001~3,3~5,5~10Precious Metals2LEMBR-021.3~1.6≥65%≥6001~3,3~5,5~10Rare Earth Metals3LEMBR-031.3~1.6≥65%≥6001~3,3~5,5~10Composite MetalApplication AreasDye, chemical, pharmaceutical wastewater, coking, petroleum wastewater--After the treatment of the above wastewater, the COD value is greatly reduced, and the BOD/COD value is greatly improved. Printing and dyeing wastewater, leather wastewater--It has a good application for decolorization, and the COD removal is obvious.Electroplating wastewater, printing wastewater, mining wastewater, other wastewater containing heavy metals--Heavy metals can be removed from the above wastewater.Organic phosphorus agricultural wastewater, organic agricultural wastewater--Greatly improve the biodegradability of the above wastewater, and can remove phosphorus and sulfide.Our Advantages10,000 square meters of water treatment filler production workshop20,000 square meters of high-end environmental protection equipment production workshop4000 square meters large open laboratoryMore than 30 productive experimental basesMore than 40 pilot systemsMore than 50 small pilot test devicesMore than 60 large instruments and equipmentMore than 50 petents More than 18 years of experienceTop 5 position of environmental protection technology industry in China.Company ProfileSome case studies1. Chemical/pharmaceutical/industrial park comprehensive wastewater pretreatment and upgrading2. Coal chemical wastewater treatment 3. Petrochemical energy wastewater treatment 4. Dye/pigment wastewater treatment5. Pesticide wastewater treatmentFAQ1.Q: Where is your company? How can I visit there? A:The company is located in CaiFu International, Kuiwen District, Weifang City, Shandong Province, China. It is about an hour's drive from Qingdao Airport and Weifang Railway Station. If you need it, we can come and pick you up. Welcome to visit our company. 2.Q:Do you have minimum order quantity request? A:No minimum order, but it can get a discount if you order a large quantity.3.Q:Do you have certificates? A:Yes,we have ISO,SGS certificate.4.Q:Can you meet my special requirements for the product? A:Yes,we have a professional design team.We can provide drawings according to your requirements.5.Q:How to buy your idea products? A:You can provide us your water or waste sources,water or waste quality,flow rate and ground area (connect us for more details) 6.Q:How to pay? A:T/T and L/C are acceptable and T/T will be more appreciated 30% deposit before producing,70% balance before loading by T/T.7.Q:What is the delivery time ?A: It depends on order quantities .Generally speaking ,the delivery time will be within 2 to 4 weeks.8.Q:How to pack the products? A:We use standard package .If you have special package requirements ,we will pack as required ,but the fees will be paid by customers.9.Q:How to install after the equipment arriving destination? A:We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee ,air tickets ,accommodation, wages will be paid by buyers. 10.Q:Are iron-carbon filler and activated carbon the same thing? Which one is better for treating wastewater? A:They are not the same thing. Iron-carbon filler has a better treatment effect on wastewater. The iron-carbon filler invented by our company has obtained a national patent certificate. It can efficiently remove COD, reduce chroma, improve biodegradability, and the treatment effect is more stable and lasting.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...