IPDB › China Industry › Metallurgy, Mineral & Energy
China, Chinese Refractory Zircon Plungers for Glass Furnace Feeder Channels1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Refractory MaterialZirconia Refractory MaterialPlunger Psr333Zr33 Plunger
Zibo Qianjingxuan Ceramic Technology Co., Ltd.
Preview:
Product Description Description of the goodsApparent porosityBulk density≥Apparentporosity≤refractoriness under loadRefractorinessunder load(0.2MPa)Thermal shock stability (1100 oC, in cold water)Spoutg/ cm3 %MPa°CoC 22.52.07181320165018 times minThe Physical and Chemical Indicators Zr33# material physical and chemical indicatorsMaterialZr28% puritryChemical Component(%)AL2O3≥65ZrO2≥19SIO2≤15Fe2O3≤0.1Apparent porosity≤17Density≥3.0Pressure resistance strength≥110MpaRUL≥1700Fused Cast AZS Spout Feature 1. No shrinkage cavities2. Low apprant porosity3. High corrosion resistance4. No pollution on glass liquid5. Long service life about 1-2 years6. Strong mechnical strength7. High refractoriness under load8. Good thermal shock resistance The history of making glass bottles is too long. The production process of making bottle is as follows: the glass melting furnace supplies material to two production lines in the same time, which include the feeder channel, the feeder machine, and the making-bottle machine. The entrance of the two feeder is connected to the exit of glass liquid in the glass melting furnace, and the entrance of the feeder channel is connected to feeder spout and the exit of the spout is connected to the bottle making machine through the orifice ring, Due to the influence of height difference, the glass liquid in the glass melting furnace naturally flows into the spout.For the sillimanite spout, after the physical effoects and the chemical erosion of the glass liqure, the factory will change the spout within 8months. If the spout cant change in time, some safe problem will happen. When changing the spout, in the feeder channel, the glass liqure should be steady in the height as the normal production because only in this height, there is much glass liqure in the feeder channel and spout, When close the entrance of the feeder channel, need use much broken glass and it is very difficult to change the pout. When finish the spout, need let the broken glass melted and leave. When melting the broken glass, it will take more time to change the spout and in this way, it will take about 20 hours to change the spout. And if operate wrongly, will cause the bad effort.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...