IPDB › China Industry › Chemicals
China, Chinese 790 Vinyl Ester Resin Epoxy Resin for Fiber Reinforce plastic1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Plastic PolymerFRP/GRPEpoxy ResinVinyl Ester Resin
CHANGZHOU JLON COMPOSITE CO., LTD.
Preview:
Product Description MFE 790 EPOXY VINYL ESTER RESINMFE 700 range, the 2 nd generation of MFE, it set to raise the standard even higher. They all based on a technology that delivers high temperature resistance, good wet ability and process ability, standard catalyst system.MFE 790 is PU modified epoxy vinyl ester resin which own the mechanical properties of vinyl ester resin and meanwhile provide higher toughness and elongation.Properties & Benefits? Resistance to most acid, salt, alkali and solvents?The flexibility, tensile properties and impact strength have been greatly improved by big molecular design and the impact strength has been increased by 40%compared with standard flexible epoxy vinyl ester resin.? Tensile elongation at break is 12%? Good processability and abrasion resistance?Excellent dynamic load resistance, good impact resistance under cyclic temperature, pressure fluctuation and mechanical impact conditions, and high strength retention rate.Applications? MFE 790 epoxy vinyl ester resin can be used in most of the common application technologies associated with fiber reinforced plastic process with process hand lay-up, spray up, filament winding, pultrusion and infusion/RTMTypical Liquid Resin PropertiesProperty (1)ValueAppearanceYellow transparent liquidViscosity, cps 25oC350-600Gel time(2) in min (25oC)15-25Styrene Content41-45 %Shelf Life(3), Dark, below 25oC6 monthsDensity1.03g/ml(1) Typical values, cannot be constructed as specifications(2) 100 g resin with 1.2g Butanox M50 and 2.5g NL-49P (1% Cobalt),0.5g DMA (10% Dimethylaniline)Typical Properties (1) Resin Clear Casting (3)PropertyValueTest MethodTensile Strength/ MPa50-65ASTM D-638/ISO 527Tensile Modulus/ GPa2.4-2.8ASTM D-638/ISO 527Elongation at break, %12.0-14.0ASTM D-638/ISO 527Flexural Strength/ MPa90-110ASTM D-790/ISO 178Flexural Modulus / GPa2.4-2.8ASTM D-790/ISO 178Heat Distortion Temperature(3)70-80 oCASTM D-648 Method AImpact strength, J/m 500ASTM D256Barcol hardness25-35ASTM D2583/EN 59(1) Typical property values only, not to be construed as specifications.(3) Cure schedule: 24 hours at room temperature; 2 hours at 80oC(4) Maximum stress: 1.8 MPa (264 psi)Safety and Handling ConsiderationThis resin contains ingredients which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.The specification is 2016 edition and may change with the technological improvement.Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using MFE vinyl ester resin in your facilities.Standard package:Non-returnable steel drums, net weight is 200kg per drumRecommended Storage:Drums - Store at temperatures below 25oC. Storage life decreases with increasing storage temperature. Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoidcontamination of product with water, do not store outdoors.Keep sealed to prevent moisture pick-up and monomer loss.Rotate stock
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...