IPDB › China Industry › Tools & Hardware
China, Chinese CASAPPA PLD20/4/CS-GE/14-GD/14-GD/ Hydraulic Gear Flow Divider1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Hydraulic PartsOther Hydraulic Partshydraulic gear flow dividerPLD20/4/CS-GE/14-GD/14-GD/14-GD/14-GD/
Beijing Zhongping Technology Co., Ltd.
Preview:
Product Description CASAPPA PLD20/4/CS-GE/14-GD/14-GD/ Hydraulic Gear Flow Divider: Precision Flow Control for Demanding ApplicationsThe CASAPPA PLD20/4/CS-GE/14-GD/14-GD/ Hydraulic Gear Flow Divider is engineered for precision and reliability in hydraulic systems requiring accurate flow division and synchronization. This robust unit, with its advanced gear design, ensures consistent fluid distribution across multiple actuators, even under varying load conditions. It is an indispensable component in numerous industrial, mobile, and agricultural machinery, offering enhanced performance and operational efficiency.## Key Product SpecificationsThe CASAPPA PLD20 series gear flow dividers are known for their robust construction and high performance. The PLD20/4/CS-GE/14-GD/14-GD/ model, specifically, offers a balance of flow capacity and pressure handling suitable for a wide range of applications.| Feature | Specification || :------------------- | :------------------------------------------ || Model | CASAPPA PLD20/4/CS-GE/14-GD/14-GD/ || Type | Hydraulic Gear Flow Divider || Number of Sections | 4 || Flow per Section | Approximately 10.05 - 31.65 lpm (2.65 - 8.35 US gpm) || Max Continuous Pressure | 200 bar (2900 psi) || Max Peak Pressure | 250 bar (3625 psi) || Housing Material | Cast Iron (typically for higher pressure) || Displacement | Specific to section variant (e.g., 14 cm3/rev) |*Note: Exact specifications may vary based on the specific variant and configuration. Always refer to the official datasheet for precise details.*## Unpacking the Features and AdvantagesThe CASAPPA PLD20/4/CS-GE/14-GD/14-GD/ leverages positive displacement technology inherent in gear-driven flow dividers. This design ensures that for every revolution of the internal gears, a precise volume of fluid is displaced, leading to highly accurate and repeatable flow division.* Precise Flow Division: The synchronized rotation of intermeshing gears within the flow divider ensures that the incoming hydraulic fluid is split into multiple outlets with exceptional accuracy, typically within ±2% of the desired ratio. This high degree of synchronization is critical for applications demanding precise control and coordinated movement of multiple actuators.* Load Independent Operation: Unlike pressure-compensated flow dividers, gear-type dividers are largely unaffected by variations in outlet pressure. This means that even if one actuator encounters a higher load and requires more pressure, the flow to other actuators remains consistent, ensuring smooth and synchronized operation.* Robust Construction: Constructed from high-resistance materials like cast iron, these flow dividers are built to withstand demanding operating conditions and high pressures. This robust design contributes to their longevity and reliability in harsh environments.* Flow Combining Capability: In addition to dividing flow, CASAPPA gear flow dividers can also function as flow combiners. This allows for the integration of multiple return flows, further simplifying hydraulic circuits and enhancing system efficiency.* Pressure Intensification: These units can also serve as pressure intensifiers, allowing for high-pressure outputs from a lower-pressure system with a single pump. This is particularly useful in applications requiring localized high-pressure actuation.* High Efficiency: Gear flow dividers are highly efficient, minimizing energy loss and heat generation compared to other types, such as spool-type dividers.## Diverse Application ScenariosThe versatility and precision of the CASAPPA PLD20/4/CS-GE/14-GD/14-GD/ make it suitable for a broad spectrum of industries and applications:* Mobile Hydraulics: Essential for synchronizing the movement of multiple cylinders or motors in construction equipment (excavators, loaders), agricultural machinery (tractors, harvesters), and material handling equipment (forklifts).* Industrial Automation: Used in production lines and automated systems where synchronized motion of actuators is critical for process efficiency and product quality.* Agricultural Machinery: Ensures even distribution of hydraulic power to various machine functions, maintaining consistent operation of implements.* Construction Machinery: Enables coordinated operation of hydraulic attachments, improving performance and safety on job sites.* Specialized Systems: Applications requiring precise flow control for tasks like precise lifting, material processing, and complex kinematic movements.## Operational Guidelines and PrecautionsTo ensure optimal performance and longevity of your CASAPPA PLD20/4/CS-GE/14-GD/14-GD/ Hydraulic Gear Flow Divider, adhere to the following operational guidelines and precautions: Installation and Usage* Mounting: Install the flow divider in a clean environment to prevent contamination. Ensure all connections are properly tightened to prevent leaks.* Fluid Compatibility: Use only hydraulic fluids that are compatible with the system and the flow divider's internal seals (typically Buna N or Viton). Refer to the manufacturer's recommendations for specific fluid types and viscosity.* Direction of Flow: Ensure the hydraulic fluid enters the inlet port as indicated by the manufacturer's markings. Gear flow dividers are typically designed for a specific flow direction.* System Synchronization: For optimal synchronization, especially with cylinders that may stall, consider using integral relief valves or ensuring that actuators have the opportunity to reach the end of their stroke to realign.* System Bleeding: Properly bleed the hydraulic system after installation to remove any trapped air, which can affect performance and cause damage. Maintenance and Care* Fluid Quality: Regularly monitor and maintain the quality of the hydraulic fluid. Contaminated or degraded fluid can lead to premature wear of internal components. Ensure filters are clean and replaced as recommended.* Regular Inspections: Periodically inspect the flow divider for any signs of leaks, unusual noise, or abnormal operation. Check that all screws are tightly secured.* Temperature Monitoring: Avoid excessive operating temperatures, as they can degrade hydraulic fluid and damage components.* Contamination Control: Implement a robust filtration strategy to minimize particulate contamination in the hydraulic system, as gear-type dividers, while more tolerant than some other types, still benefit from clean fluid.## Frequently Asked Questions (FAQs)Q1: How does a CASAPPA PLD20 hydraulic gear flow divider work?A gear flow divider, like the CASAPPA PLD20, operates on the principle of positive displacement. It contains intermeshing gears housed within separate chambers. As hydraulic fluid enters the inlet, it causes the gears to rotate. The synchronized rotation of these gears ensures that equal volumes of fluid are displaced and directed to each outlet port, regardless of external load variations.Q2: What are the main benefits of using a CASAPPA PLD20 gear flow divider?The primary benefits include achieving highly accurate flow division for synchronized movement of multiple actuators, operation that is largely independent of load pressure changes, robust construction for durability, and the ability to combine flows or act as a pressure intensifier. These features lead to improved system efficiency, reduced energy consumption, and enhanced operational reliability.Q3: Can a CASAPPA PLD20 flow divider be used to synchronize hydraulic cylinders of different sizes or loads?Yes, gear flow dividers are excellent for synchronizing cylinders, even with different loads. While the flow division is proportional to the displacement of each section, the inherent design compensates for pressure differentials. For optimal synchronization, especially if one cylinder might stall, it's advisable to ensure equal displacements for perfectly synchronized cylinders or to consider relief valves to allow for realignment.Q4: What is the maximum operating pressure for the CASAPPA PLD20/4/CS-GE/14-GD/14-GD/ model?The CASAPPA PLD20 series, including the specified model, typically operates at a maximum continuous pressure of 200 bar (2900 psi) and can handle peak pressures up to 250 bar (3625 psi). However, it is crucial to consult the specific product datasheet for the exact pressure ratings of the chosen variant.Q5: How does a gear-type flow divider differ from a spool-type flow divider?Gear-type flow dividers utilize meshing gears for positive displacement, making them largely unaffected by pressure variations and very efficient. Spool-type flow dividers, on the other hand, use a pressure-compensated spool to balance flow, which can be more sensitive to pressure swings and may generate more heat. Gear types are generally more robust and tolerant of contamination.Q6: Can a CASAPPA PLD20 flow divider be used in applications with high contamination levels?While gear flow dividers are more tolerant of contamination than spool-type dividers due to their robust design and larger internal clearances, maintaining clean hydraulic fluid is always recommended for optimal performance and longevity. Regular fluid filtration and maintenance are crucial.Q7: What maintenance is required for a CASAPPA PLD20 gear flow divider?The primary maintenance involves ensuring the hydraulic fluid is clean and at the correct viscosity. Regular visual inspections for leaks and listening for unusual noises are important. Unlike some components, gear flow dividers typically do not require frequent internal lubrication as they are lubricated by the hydraulic fluid itself.Q8: How do I select the correct CASAPPA PLD20 flow divider for my application?Selection involves determining the total required flow rate, the number of output sections needed, the maximum operating pressure, and the desired flow ratio for each section. It's also important to consider the physical mounting space and port configuration. Consulting the CASAPPA product catalog and technical support is highly recommended.Q9: Can a CASAPPA PLD20 flow divider also be used to combine flows?Yes, CASAPPA gear flow dividers are designed to function as flow combiners as well as dividers. This capability allows them to integrate return flows from multiple circuits, simplifying system design and improving efficiency.Q10: What are the primary applications for the CASAPPA PLD20/4/CS-GE/14-GD/14-GD/ Hydraulic Gear Flow Divider?This model is ideal for applications requiring precise synchronization of multiple hydraulic actuators, such as in construction equipment, agricultural machinery, material handling systems, and industrial automation where consistent and balanced fluid distribution is paramount.Beijing Zhongping Technology Co., Ltd. is a leading provider of industrial automation solutions, intelligent robotics, and advanced system integration services. With decades of expertise, the company has established long-term strategic partnerships with global industry leaders such as Siemens, ABB, Schneider Electric, KUKA, Yaskawa, and FANUC, leveraging their cutting-edge technologies to deliver innovative, tailored solutions across diverse sectors.Specializing in technical support, product distribution, and end-to-end engineering services-including system design, installation, commissioning, and maintenance-Beijing Zhongping Technology ensures seamless operational efficiency for clients in industries spanning automotive manufacturing, battery production, aerospace, oil and gas, chemical processing, food and pharmaceuticals, logistics, metallurgy, and heavy machinery. By harnessing its robust global supply chain network and a highly skilled technical team, the company guarantees precision-driven resource allocation, rapid response capabilities, and cost-effective procurement strategies. These capabilities empower clients to streamline operations, reduce downtime, and enhance competitive advantage in dynamic markets. Committed to excellence, Beijing Zhongping Technology remains dedicated to advancing industrial innovation while fostering sustainable growth and value creation for enterprises worldwide.Q1: What is the core business scope of Beijing Zhongping Technology Co., Ltd.?The company's business scope primarily covers comprehensive industrial robot supply chain services, industrial automation technologies and technical services, digital smart factory solutions, and hydraulic intelligent control products and services.Q2: Which brands does the company collaborate with?The main cooperative brands of the company are SIEMENS,ABB,Schneider,DELTA,WEINVIEW,MCGS,ADVANTECH,OMRON,Simphoenix,RITTAL,MOXA,ESTUN, RKC, YASKAWA, HIKVISION, FANUC, MITSUBISHI ELECTRIC, KUKA, Fuji Electric, SICK, Walvoil, CASAPPA, EATON, Bosch Rexroth Group, Parker etc.Q3: What are our competitive advantages compared to other suppliers?With our robust supply chain capabilities and global presence, we deliver faster, more efficient services. We strive to offer the best possible prices to demonstrate our sincerity and value.Q4: How long does delivery take? What about shipping costs?Delivery timelines and shipping costs depend on the specific model(s) and quantity you require. Please share your current needs with us for precise details.Q5: Can't find the model you need?We showcase only a selection of models here. If you cannot find your desired model, contact us directly for further assistance.Q6: How to contact Beijing Zhongping Technology Co., Ltd.?Beijing Zhongping Technology Co., Ltd.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...