IPDB › China Industry › Industrial Equipment & Components
China, Chinese Petrochemicals Mvr Falling Film Concentration Crystallization Equipment/Vacuum Evaporator1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Environment Protection DeviceSewage Treatment EquipmentFalling Film EvaporatorVacuum Evaporator
Qingdao Conqinphi Environmental Technology Group Co, . Ltd
Preview:
Product DescriptionFalling film evaporator applicable materialsIt is suitable for heat-sensitive materials (such as milk, juice, antibiotics, vitamins, etc.), high-viscosity materials (such as syrup, colloid, polymer solution), easily scaling materials (such as aluminum sulfate, seawater desalination), and high-concentration concentrated materials (such as allulose, lithium sulfate).DimensionsFalling film evaporatorRising film evaporatorHeat transfer efficiencyHigh (thin liquid film, high heat transfer coefficient)Higher (forced convection, but uneven liquid film)Material adaptabilityHeat-sensitive, high-viscosity, and easily scaling materialsLow viscosity, easy to foam, large evaporation materialOperational flexibilityThe feed distribution needs to be precisely controlled, and the operation requirements are highHigh tolerance to feed rate fluctuations and simple operationEnergy consumptionLow (efficient heat transfer, can be equipped with MVR to achieve energy saving)Higher (requires more heating steam, especially when operating in single-effect mode)Equipment costsHigher (precision distributor, corrosion-resistant material)Low (simple structure, relatively loose material requirements)Maintenance difficultyThe distributor and heat exchange tubes need to be cleaned regularly (to prevent scaling/clogging)Maintenance is simple, but the tube bundle is prone to failure due to flooding or corrosionHow it worksWorking Principle of an MVR EvaporatorThe material enters from the top of the evaporator and is evenly coated on the inner wall of the heat exchange tube through the distributor to form a liquid film. It flows from top to bottom under the action of gravity and is heated and evaporated by the steam outside the tube. The steam and the concentrated liquid are separated at the bottom.ApplicationFalling Film Evaporator:Rising Film Evaporator:Food Industry: Milk concentration (from 12% solids to 45%) uses a two-stage falling film + MVR system, reducing energy consumption by 70% and minimizing product nutrient loss.Chemical Industry: Aluminum sulfate evaporation and crystallization uses a falling film system to achieve efficient evaporation and uniform crystal growth, reducing the risk of scaling.Salt Industry: Seawater pre-concentration for desalination. A rising film evaporator concentrates seawater from 3% salinity to 15% before feeding it into a multi-effect evaporator, reducing overall energy consumption.Wastewater Treatment: Chemical wastewater (containing organic matter) is dewatered through rising film evaporation, and the concentrate is subsequently incinerated, achieving zero emissions.Operation and maintenance precautionsDaily Operation and Precautions for MVR EvaporatorsPre-Startup Preparation1.Equipment Integrity Check: Ensure the evaporator body, piping, valves, compressor, pump, and other components are intact, with secure connections and no leaks or looseness.2.Electrical System Check: Confirm that the electrical cabinet has no missing phases and that the power load meets requirements. Check switches and wiring for proper operation.3.Utility Check: Ensure the cooling water, steam, and compressed air supply is normal, with a circulating water pressure of 0.2-0.3 MPa.4.Liquid Level and Lubrication Check: Confirm that the liquid levels in each storage tank are normal and that the seal water tank has sufficient liquid. Check the lubricating oil level in the compressor and pump.5.Valve and Equipment Status: Ensure that manual valves are in the correct position and test the electric valves for proper operation.Normal Startup Procedure1.Start the Cooling System: Start the cooling water pump to ensure normal cooling water circulation.2.Start the Steam System: Slowly open the steam valve and gradually increase the steam pressure. 3. Start the Compressor: Turn on the compressor and adjust the outlet pressure to achieve the preset vacuum level.4.Feed Operation: Slowly open the evaporator feed valve and adjust the feed rate to ensure the material concentration meets the specified range.Operation Monitoring1.Monitor Operating Parameters: Regularly check parameters such as temperature, pressure, and flow rate to ensure the equipment is operating within the specified range.2.Cleaning Key Components: Clean key components such as the heater and condenser to ensure stable performance.3.Electrical System Inspection: Inspect the electrical and control systems to ensure proper operation.Other Precautions1.Water Quality Inspection: Check the incoming water quality before startup and perform pretreatment if necessary.2.Cleaning Fluid Treatment: The cleaning fluid must be filtered or treated before discharge or reuse.3.Professional Maintenance: Complex maintenance and cleaning work is recommended to be performed by a professional manufacturer.Strictly following the above operation and maintenance procedures can effectively extend the life of the MVR evaporator and improve its operating efficiency and stability.Company ProfileQingdao Conqinphi Environmental Technology Group Co., Ltd. Qingdao Conqinphi Environmental Technology Group Co., Ltd. is a system integration manufacturer specializing in the evaporation and concentration of high-salinity wastewater. Conqinphi boasts its own 90,000 square meter processing plant and employs hundreds of people. It is a research and development-focused technology enterprise. Conqinphi's main products include MVR evaporators, multi-effect evaporators (primarily triple-effect evaporators, quadruple-effect evaporators, double quadruple-effect evaporators, and double-effect MVR evaporators), zero-discharge industrial wastewater systems, plate and tubular heat exchangers, crystallizers, mother liquor treatment systems, and other wastewater treatment equipment. With a wide range of products, Conqinphi primarily provides clients with systematic equipment solutions, manufacturing, processing, installing, and commissioning equipment to help them address the evaporation and concentration challenges of high-COD and high-salinity wastewater.Conqinphi's multi-effect evaporators offer low investment, high treatment efficiency, low operating costs, and stable and reliable system operation. They are widely used for evaporation, concentration, and crystallization of high-salinity industrial wastewater in the petrochemical, metallurgical, pharmaceutical, fine chemical, papermaking, printing and dyeing, food processing, jam and juice concentration, seawater desalination, electroplating, rubber additive, epoxy resin, lithium battery, and desulfurization industries. Conqinphi serves thousands of clients, providing them with systematic industrial wastewater solutions and saving them from wastewater treatment challenges.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...