IPDB › China Industry › Chemicals
China, Chinese CNMI 2 Component Silicone Resin Bm Marble Sealant For Exterior Wall Bonding1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
AdhesiveSilicone Adhesiveadhesiveceramic tile sealant
CNMI INDUSTRIAL CORPORATION
Preview:
Product Description Product DescriptionCNMI 2 Component Silicone Resin Bm Marble Sealant For Exterior Wall Bonding Product Parameters Product NameCNMI Crack Repair Wood Filling Epoxy Paste for Basement Walls Waterproof Epoxy Adhesive Paste Super Epoxy GlueComponentThixotropic PasteCustomize PackageAcceptedCuring Time10-12 Hours ( 25oC )Mixing Ratio1:1 by weightFeatureStrong adhesion/The chemical structure closely/Anti-natural disaster /No volatile solvents/Impact resistance/Does not pollute the stone/Fast curing speed/The longer the time the greater the stickiness/Anti-mildew and anti-black/Low temperature resistance/Anti-typhoon/Strong stability/High ToughnessApplicationStone craft, Tile splicing, Swimming pool repair, Guardrail reinforcement, Stone bonding, Dry hanging on the background wall, Stair bonding, Wash basin fixedPackage2kg, 4kg, 5kg,10kg, 20kg. Accept OEMDelivery Time3-5 Working daysPaymentT/T, L/C AT SIGHT, If you have good credit or we cooperation long time, the OA DP CAD also workableNote: Typical performance should not be considered as product specifications.Do not allow children to touch this glue, do not ingest.The construction environment need to be ventilated and dry, construction section need to keep clean and oil-free.Wear gloves, masks, goggles, helmets and other protective equipment during construction.Do not put the leftover glue in the glue bucket after evenly adjusting, and cover the bucket lid immediately after taking out the glue.Avoid direct sunlight. Packaging & ShippingCompany ProfileOur Advantages FAQQ: Could you supply the wood filling epoxy paste samples for we test?A: Yes, no problem, pls contact us with our workable for samples.Q: What treatment should I do before using the wood filling epoxy paste?A: Surface treatment: The surface of the adhesive should be dry, not wet, dust-free, oil-free, firm and not loose. The paint on the metal surface, the loose objects on the concrete surface and other substances that hinder the full adhesion must be removed. If the slate or metal surface is too smooth, it must be properly polishedQ: What is the method of using the wood filling epoxy paste?A: Mixing method: Use a spatula to take the same amount of the dry hanging glue A and B components, and place them on the smooth surface (Do not share the spatula for A and B components), and then use a spatula to remove the A and B components. Stir the parts thoroughly until they are evenly mixed and the color is consistent, ready to use.Q: Can the wood filling epoxy paste parts that exceed the effective construction time be moved?A: Adhesive parts exceeding the effective time of construction shall not be moved again. If you need to move, that need to be re-adjusted and paste.Q: What should I do when the construction temperature is lower than 10oC?A: When the application temperature is lower than 10oC, it can be heated at the sticking part, but not higher than 65oC.Q: Can the wood filling epoxy paste bear weight at the beginning?A: No, Our epoxy paste adhesive can not bear weight at the beginning of curing.Q: What is the shelf life of your wood filling epoxy paste?A: The shelf life of our epoxy paste adhesive is two years under the condition of original sealed storage, and it can still be used if it is retested after two years if the performance is qualified. Contact Us
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...