IPDB › China Industry › Metallurgy, Mineral & Energy
China, Chinese High-Performance Choke Manifold for Effective Well Pressure Management1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Petroleum Equipment MachineryPetroleum Machinery PartsOptimal Well ManifoldAdvanced Choke Manifold
ZHE MACHINERY CO., LTD
Preview:
Product Description Product DescriptionChoke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling, as it is, the device is adopted to execute new drilling-well's technique of balance pressure, which can avoid pollution of oil-layer, improve the speed of drilling and control blowout effectively. One end of the device connects with the side flange of BOP spool. When BOP closes, it can control the finite pressure from casing by adjusting the choke valve's opening, so balanced drilling can work under minimum pressure-difference.2. ConfigurationThe choke manifold consists of choke valves, gate valves, line pipes, fittings, pressure gauges and other components.3. Working PrinciplesWhen the pressure inside the well rises, opening/closing the choke valves (including manual chokes, hydraulic chokes and positive chokes) on the choke manifold can allow the release of the fluid inside the well so as to control casing pressure, which can be directly blown out through the gate valve if the casing pressure is quite high.4. Pressure RatingsThe kill manifold is available in pressure ratings of 14MPa, 21MPa, 35MPa, 70MPa and 105MPa, and also can be available upon customer request.5. Operating Instructions(1) The working pressure of all components on the choke manifold shall be compatible with that of the BOP stack used.(2) The choke manifold shall be installed at the place where the operator can reach it easily. The pressure test must be performed prior to installation and the seat test pressure shall be equal to the rated working pressure.(3) The line pipe shall be level and straight as much as it could. In case of the turn of the line pipe, the 120 degree steel bent pipe shall be used. The bore of the line pipe shall be large enough.(4) The pressure gauge must be installed.(5) In winter, the choke manifold can work under a low temperature condition. Product ParametersApplicationOilfield Drilling EquipmentTemperature of MediaNormal TemperaturePowerHydraulicMediaWaterStructureGateRated operating pressure3000~15000 psiProduct specification levelPSL3~PSL4Rated temperature levelP,U(-29~121)Performance requirement levelPR1,PR2Product material gradeEE,FFMian bore diameter2 9/16", 3 1/16",4 1/16"CertificateAPI 16CConfigurationsSingle-wing ,Dual-wing, Multi-wing or integral.Control modelsManual,Hydraulic,Completed with control panel for the remote controlBottom baseDouble-casing& Multi-stage lift-type or Skid-mounted typeRelated Products
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...