IPDB › China Industry › Chemicals
China, Chinese 2 Component High Strength Epoxy Metal Repair Putty for Repairs to Metallic Surfaces1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
AdhesiveEpoxy Resin AdhesiveMetal Repair Epoxy2-Part Epoxy Adhesive
Guangdong Yiyuan New Materials Co., Ltd
Preview:
Product DescriptionProduct DescriptionEpoxy Metal Repair PuttyMeatl Repairing Adhesive HG111/HG112/HG113/HG114Metal repairing adhesive is a 2-part, special materialglue filled epoxy resin system. It is extremely resistant to corrosion, chemical attack and abrasion. It is ideal for restoring parts worn by mechanical and/or corrosion impact. Helps to restore tolerances to worn shafts, repairing worn keyways and damaged housings, filling pitted surfaces in worn machinery and restoring fit to bearing housings.BENIFITS:? Easy to mix and use? Will not sag or shrink? Rebuild worn parts fast-limits downtime? Supperior adhesion-forms a soil bondSpecification? Metal-filled two-component epoxy putty;? Bonds to metals, concrete and plastics;? Cures at room temperature;? High strength,Can be drilled, tapped, machined or painted;? Excellent resistance to oil, water and chemicals;? Ideal for patching and repairing areas where welding or brazing is undesirable.? Rebuild and repair various steel material imperfect, crackle and wearing.? Wear and corrosion resistance, no shrinkage, similar to original material colors.? Working temperature: -60°C~+160°C.? Shelf Life: 12 monthsApplicationHow To Use1. Surface treatment: surface treatment has a great influence on the repair effect. By repairing the surface should be polished rough or sandblasting processing, to grind the base material color, special treatment for some special conditions, such as cast iron pump shell surface rust water zone to the moisture within the surface using the method of flame barbecue shaved, then polished or sandblasting: class for some shaft or hole wear size, on the premise of ensure enough strength, can be polished or turning threads of the rough surface. Rectangular groove or dovetail groove should be polished at the scratched part of the guide rail or cylinder block, and the depth should be more than 2mm.2.Cleaning: with cleaning agent or absorbent cotton dipped in acetone cleaning polished surface to remove residual oil.3.Mixed repair putty: repair putty is composed of A and B two components, the use of strictly in accordance with the provisions of the mixing ratio of A and B components fully mixed. Use it up within the specified operable time limit. If the prepared glue is not used up at one time, the remaining glue cannot be used again. It is suggested to use it along with it to reduce waste.4.Glue: with the scraper or glue knife will be mixed with good repair putty coated on the surface to repair, can be coated with a little, with the scraper or glue knife repeatedly pressed, so that the repair putty and matrix fully infiltrated filling, and then coated with the rest of the repair putty, set aside enough for processing, or using molding method.5.Curing: under normal conditions at room temperature (20~25℃) curing for 8 hours can be machined, 24 hours can be put into use; When the temperature is below 25℃, the curing time is appropriately extended. When the temperature of the surface to be repaired is below 15℃, the proper heating method must be adopted to ensure the curing of the coating.Packing & DeliveryCompany ProfileFAQ1. who are we?We are based in Guangdong, China, start from 2023,sell to Southern Europe(27.00%),Domestic Market(20.00%),Eastern Europe(20.00%),North America(10.00%),Western Europe(10.00%),Southeast Asia(10.00%),Mid East(3.00%). There are total about 11-50 people in our office. 2. how can we guarantee quality?Always a pre-production sample before mass production;Always final Inspection before shipment; 3.what can you buy from us?glue remover,adhesives,glue,Pipe Thread Seal Tape,Anaerobic Adhesive 4. why should you buy from us not from other suppliers?Guangdong Yiyuan New Material Co., Ltd. is a production, R & D, production as one of the comprehensive adhesive products manufacturer. Our main business areas include various adhesive, anaerobic adhesive,Industry instant glue,UV glue, cleaner,AB glue ect 5. what services can we provide? Accepted Delivery Terms: FOB,CIF,EXW; Accepted Payment Currency:USD,EUR,CNY; Accepted Payment Type: T/T,L/C,MoneyGram,PayPal,Western Union; Language Spoken:English,Chinese
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...