IPDB › China Industry › Metallurgy, Mineral & Energy

China, Chinese High Quality New Technology Sand Washer¹ Industrial Products Supplier Manufacturer Details, price list catalog:

China Industrial Products Supplier Manufacturer List Catalog

Mining Machinery Mining Crusher Sand Washer Washer

Shanghai AXD Heavy Machinery Co., Ltd.

Preview:

Product Description New technology Sand WasherThis product is mainly used for sand factory, electric pole factory, work-site of building and concrete dam to wash, classifying and de-watering various sands.This sand washer adopt inclination of 15° , under the water tub, three weir plates form the sediment pool, the screw head is immersed in this pool, the screw is driven by electric motor through reducer rotating continuously, the fresh water is feeding from porous plate at bottom of sediment pool, this machine have three functions of washing, de-watering, classifying.Washing: The sand is feeding into the sediment pool from the feeding box, acting by rotating screw blade, the sand is turning and rolling and grinding each other to eliminate impurity and water-air layer around sand to facilitate de-water. The fresh eater rising current from the porous plate carry foreign matter to water surface and overflow the weir plate, to finish washing processing.De-watering: The sand with bigger density is sunken down to tub bottom, the screw blade push this sand upwards, when passing through upper tub of proper length above water level, the water is draining into sediment pool from another drainage ditch, the de-watered sand is out from the discharging opening.Classifying: Material classifying is realized by overflowing the non-needed fines, the controlling method is adjusting height of overflowing weir and adjusting speed of screw.Models XL-450 XL-915 2XL-915 XL-1115 2XL-1115 XL-1370Diameter of screw (mm) 915 915 1115 1115 1370Length of tub (mm) 7585 7580 9782 9782 10363Feed Size (mm) ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10Capacity (t/h) 100 200 175 350 250Speed of screw (r/min) 21 21 17 17 14Electric Motor Power(kW) 11 2× 11 15 2× 15 22Water Consumption (t/h) 10-80 20-160 20-150 400-300 20-250Dimension (mm)(L× B× H) 8500× 2810× 3600 8420× 3765× 3960 10970× 3945× 4720 10970× 5250× 4720 11420× 4458× 5326Weight (kg) 6271 11110 10186 17941 15349Models XL-450 XL-915 2XL-915 XL-1115 2XL-1115 XL-1370Diameter of screw (mm) 915 915 1115 1115 1370Length of tub (mm) 7585 7580 9782 9782 10363Feed Size (mm) ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10Capacity (t/h) 100 200 175 350 250Speed of screw (r/min) 21 21 17 17 14 Product Description: NEMA EPACT are three phase induction motors which are single speed, totally enclosed, self-cooled, continuous duty, low voltage and cage type. The motors conform to NEMA MG1 standard and adopt casting iron frames. The efficiency meets America NEMA EPACT standard. Service factor is 1.15. The motors have passed America CC certificate and Canada CSA certificate. Product NameNEMA EPACT Hight Efficiency Three Phase Induction Electric Motor (Design A, B)Frame 143T~587T; Rated power 1-500HP,Service factor: 1.1Rated Voltage230/460V,460V or 575VRated frequency60HzStructureTEFC (IP54,IP55)Thermal Class 155 (F)Main ApplicationAC motors have high efficiency, no smoke, no smell, no pollution to the environment, and less noise. Because of its series of advantages, it is widely used in industrial and agricultural production, transportation, national defense, commercial and household appliances, medical and electrical equipment and other fields. Continues Casting Machine with CE certificatedPrice and Equipment List for R6m, 3strands, 12meter billets CCMNO:CCM6312I.Technical data1. CCMCasting radius:R6mBillet specification:100*100, 130*130, 150*150Strand number:Strands 3 strandsDummy bar:Rigid dummy barLadle support:80t ladle turretCutting way:Automatic flame cutting machinesElectrical system:Siemens Transducer, Siemens PLC, SCHNEIDER contactors.PLC automatic controllingBillets Size:6m\12mPusher-type:Hydraulic pressure system, Mechanical car type.2.Water systemA.Mould cooling waterInfluent pressure:P≥0.9MpfaInfluent temperature:≤35CInfluent effluent temperature difference:6-10CpH:7.5-9Water total hardness:≤150mg/LFlow:≥360Nm3/hB.Secondary cooling waterHydraulic:P≥0.6MpaImpurity particle size:≤0.2mmFlow:≥80Nm3/hC.Machinery cooling waterHydraulic:P≥0.6MPaImpurity particle size:≤0.5mmFlow:≥60Nm3/h3.Gas SystemA. OxygenPressure:P≥0.9MpaPurity:≥99.5%Flow:≥4Nm3/minB. GasPressure:P ≥0.3MPaCombustion value:≥93700KJ/m3Flow:≥1.5Nm3/minC. Compressed airPressure:P ≥0.5MPaFlow:Q≥5Nm3/minWithdrawal straightening machinePower:11KWRated revolution:1500/minBillet withdrawing force(max):11000NStraightening force (max):220000NTension speed range:0.3-3.0m/minDummy bar speed (max):3.99m/min4.Central hydraulic stationSystem pressure:P≥8.0MPaSystem flow:Q=37.5L/minII.Supply cope1.On-line equipment listNo Equipment name Unit Qty. Remark1 Ladle turret PC 1 100t capacity for each arm2 Tundish moving car PCS 23 Tundish PCS 24 130sq.Mm mould PCS 35 Mould cover SETS 36 Oscillation device SETS 37 Secondary cooling manifold(stainless steel) and support SETS 38 Guide section for secondary cooling SETS 39 Steam drainage system in the secondary cooling system SET 110 Withdrawal straightening machine SETS 311 Dummy bar PCS 312 120sq Dummy head and transition head SETS 313 Dummy bar guide wheel SETS 314 Dummy bar storage device SETS 315 Dummy bar heat protetion cover PCS 316 Roller table before cutting Group 317 Transmit roller table Group 318 Discharge roller table Group 319 Transverse pusher SET 120 Cooling bed SET 1 Step by step21 Overflow chute PCS 622 Hydraulic station system SET 123 Cooling water distribution system SETS 324 Electrical system SETS 3A Power supply conbinet SET 1B Frequency conbinet SETS 3C PCL conbinet SET 1D Main operating table SET 1E Suspension operating box SETS 3F Small operating box SETS 327 Steel structure platform Batch 1A Main operating platformB Temperature test platformC Dummy bar storage platform2\Auxiliary equipmentNo. Equipment name Unit Qty. Remark1 Water pipe, connector valve.etc Batch 12 Various cable, tube.etc Batch 13 Drainage gun PCS 34 Cutting gun PCS 32. Price:USD FOB Shanghai.3. Lead time;100 days4. 30% advance payment, 30% payment 20 days after first payment, 40% paymentPaid before date of shipment.Management Installation:(we consider send 3 engineers to your factory), ACCOMMODATION AND TRANSPORTATION COSTS will be paid by buyer.Totally overse charges paid by buer.The buyer shall compensate the experts at USD 150 per day for delaying time per engineer.The seller should be responsible for the scene testing;After normal melting the seller should be responsible to guarantee repair or change of the faulty components in 6 monthsDelivery by 1 piece frame container, 1 piece 40HQ container, 5 pieces 40GP container..dust removal equipment water bath dedusting equipmentFeatures of electric furnace dust removal system:1) Dust removal system equipment has strong reliability, not affecting the normal operation of smelting, easy for maintenance.2) Gas flue capture mode belongs to the whole process of capturing.3) Gas flue capture rate is more than 98 percent, can achieve plant roof, can not see smoke4) Dust collection efficiency is more than 99 percent5) Dust concentration in the workshop is less than 10mg/m3.6) Low cost for long-term operating , stable efficiency7) The wind engine noise is less than 80dB.8) The flue has no dust fouling phenomenon9) Dust collecting volume is more than 12Kg / t steelInduction furnace is used for smelting or insulating ferrous metals, non-ferrous metals, sponge iron, such as scrap iron, scrap steel, copper, aluminum and so on. Complete working equipment such as continuous casting machine, rolling mill, mainly used for the production of billet, steel bar, angle steel, H-beam, I-beam, etc. Using KGPS, IGBT, single or double power supply technology, PLC (Siemens) can be realized throughout the monitoring. Main supply list: 2 sets of electric furnace body, 2 sets of hydraulic or mechanical tilting electric furnace mechanism, 1 set of control platform, 1 set of intermediate frequency control cabinet (6 pulse 1, 12 pulse 2, 24 pulse 4), low voltage control cabinet (6 pulse 1, 12 pulse 2, 24 pulse 4), 1 set of capacitor cabinet, 4 or 8 water-cooled cables; 1 water temperature alarm, 1 leakage alarm; 1 crucible mold, 1 liquid One batch of pressure steel pipe, one set of copper row, three water tanks. Transformer, cooling tower, furnace builder, furnace lining ejector, furnace cover. Product Model: GW1.5-IGBT-1300-0.5-BDual output with a set of power supply, can supply power to two sets of furnaces simultaneously, to achieve "one for two", total power can realize stepless free distribution on two sets of furnaces. Equipping two sets of furnaces, one is used for melting or heating refining , the other is used for insulation and casting, and two sets of furnaces can mutual replace to use. Medium frequency power supply device of IGBT transistor module can be used for melting, induction heating, heating treatment.Main Technical ParametersNo.ItemTechnical Parameters01Furnace rated capacity (steel)1.5t02Rated power of medium frequency power supply (1000+300)1300kW03Maximum power of single furnace output1000kW04Rated frequency500Hz05Working temperature1600oC06Melting rate(Rated loading material, concentrate, density, the third furnace, auxiliary time not counting)1.6t/h07Power consumption(Rated loading material, concentrate, density, the third furnace, auxiliary time not counting)600kWh/t08Cooling water consumption- medium frequency power supply cabinet30m3/hSupply Range of Complete SetNo.ItemUnit01IGBT-1300(1000+300)-0.5-B medium frequency power supply device of transistor module1set02"Medium frequency power supply cabinet using closed cycle water cooling device"(Set in the rectifier cabinet)1set03Air conditioning refrigeration equipment (Set in frequency power supply device)4 sets04GW1.5t Melting Furnace2 sets05Hydraulic actuator(including hydraulic pump station, console, hydraulic oil tubing)1set06Water-cooled cable8sets07Cooling water dispenser(used for inductor and water-cooled cable)2 setsIGBT Dual track working GW1.5-IGBT-1300-0.5-BIGBT technology b GW3-IGBT-2000-0.2-Bfurnace with cover GW1-IGBT-800-1-BKGP-7t-5000-dualWe provide PS steel chip crusher 2018PS series steel chip crusher, used to crush all kinds of car scraps, shavings and cuttings into 20-50mm scraps, in order to enter the chip and machine (metal chip briquetting machine) for briquetting treatment.[Features]1 Hydraulic system is adopted to effectively solve the overload protection problem;2 Hydraulic motor, high torque, saving power;3 PLC control.Version:0.9 StartHTML:0000000105 EndHTML:0000011308 StartFragment:0000000141 EndFragment:0000011268List of 450 heavy scrap crusher Serial number Name Specifications (mm) Qty Remarks 1 Crusher shell 50mm 1 set Q235, plate thickness 50mm 2 Host hammer High manganese steel 1 set 16 pieces, each hammer head 80kg 3 Circular cutter High manganese steel 1 set 16 pieces, 45kg for each round cutter 4 Rotor disc φ1100 1 set Outer wear electrode welding 5 Spindle Diameter 390mm 1 root 6 Sieve plate φ65×100 1 set Steel casting ZG45 7 Motor 220KW 2 sets 8 Starting cabinet Soft start 1 set Control equipment operation 9 Hydraulic pumping station Matching 1 set Unpacking cylinder, movable plate cylinder, Forced feed cylinder 10 Dust removal system Matching 1 set Cyclone dedusting, pulse dedusting 11 Feeding machine 1 set 12 Magnetic separator 1 set 13 Loader heavy conveyor 1400×12000 1 set 14 Discharge belt conveyor 1000×10000 1 set 15 Belt conveyor 1000×8000 1 set 16 Waste belt conveyor 800×6000 1 set 1.Product principle and Application The crushing production line uses the principle of hammering. Under the drive of a high-speedand high-torque motor, the hammers on the host rotor take turns to hit the objects to be crushed in the cavity. Through the space formed between the liner and the hammers, After the crushed object is torn into a crushed object conforming to the specifications, a high-quality crushed material with high purity can be obtained under the action of a magnetic device. This production line is used to process waste car body, tinplate, household appliances, bicycles, empty cans and other lower scraps to make it into a superior steel making raw material. The machine continuously crushes, removes the coating film, increases the specific gravity of the volume, prevents the electric furnace from exploding, and improves the water output rate under certain conditions. 2.Technical conditions 1.1 (1) Ambient temperature: -20 oC -40 oC (2) Production staff: 3-5 people (3) Installation method: According to the installation diagram, the technicians guide the installation 1.2 Power supply (1) Three-phase four-wire 380V AC (±10%), 50HZ (±2%) (2) Low-voltage power supply of the equipment: 380v / 50hz; Working lighting power: 220v / 50hz; 3.Processing object 1. Waste car body (excluding engine, reduction gear box, tire, etc.); The 450KW crushing line needs to be broken into squares not larger than 800mm * 800mm when crushing colored steel tiles. 2, Tinplate (cans, etc.) 3. Iron sheet for home appliances (excluding motors, compressors, shafts, etc.) 4. ≤6mm light and thin materials and similar domestic waste 25, Empty cans (wash out thin materials, coatings, etc.), non-sealed cans. Note: After all the processed materials have been preliminarily processed, the shape and volume need to ensure that they can smoothly enter the main machine inlet. (Such as cans, small paint buckets, color steel tiles, car shells, etc.) 4.Not suitable for broken objects 1 Dangerous things: a Sealed container, conduit, etc .; b. Items that may cause an outbreak, fire, etc .; 2 Scrap cars: a. Subjects other than passenger cars; b. Engine, converter, differential gear, tire;

× More Keyword ..

× More Menu ..

×

Manufacturing & Processing Machinery

×

Industrial Equipment & Components

×

Tools & Hardware Products