IPDB › China Industry › Metallurgy, Mineral & Energy
China, Chinese Industrial Rotary Dryer for Efficient Bauxite and Ball Clay Drying1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Mining MachineryMining DryerIndustrial DryerKaolin Dryer
Zhengzhou Jiutian Technology Machinery Co., Ltd.
Preview:
Product Description Product Description The bentonite dryer is mainly used for the drying of various types of clay mud such as bentonite, kaolin, aluminum, and iron clay, and solves some problems of sticking, crushing, and drying. Dingli Group successfully launched the bentonite dryer according to this development direction.The bentonite dryer can adapt to various fuels such as coal, oil, gas, etc. At present, the fluidized boiler is favored by users due to its convenient operation, energy saving, environmental protection, and easy purchase of raw materials. Some manufacturers also choose natural gas or coal gas generators for conversion, and the gas is burned for a second time to achieve the drying effect. It conforms to the country's policy of creating an environment-friendly and resource-saving society and is an environmentally friendly and energy-saving product that replaces traditional drying equipment.ApplicationsSuitable for the drying of various types of clays such as bentonite, kaolin, aluminum-iron clay, etc., widely used in cement, mining, slag, clay and other industries. Working PrincipleThe bentonite drying system is mainly composed of a hot air stove, belt feeder, drum dryer, belt discharger, induced draft fan, cyclone dust collector, bag filter (or wet dust collector), and operation control system.The equipment adopts the downstream drying process, and its working principle is as follows: The first is the guide area, where the bentonite enters this area and quickly evaporates water in contact with the high-temperature hot air, and the material is guided to the next working area under the movement of the guide plate with a large lead angle; The second is the copying area, where the bentonite is picked up by the copying board to form a material curtain. At this time, the material is in full contact with the hot air, and the water in the mineral slag quickly evaporates and strips into water vapor, and the water vapor is then sucked away by the induced draft fan. So as to achieve the purpose of drying; the bentonite is dried in this area to a loose state with moisture less than 5% (or lower). After heat exchange, the material reaches the required moisture state and enters the final discharging zone; The third is discharging In this zone, the drum does not have a copy board, and the material rolls and slides to the discharge port in this zone to complete the entire drying process.Heat SourceSteam waste heat heating: equipped with automatic chain exhaust furnace, high and low coal injection furnace, and other coal-fired hot blast stoves, the cost of coal-fired drying is low, but the pollution of coal-fired is serious. Therefore, in addition to improving the heating efficiency of coal-fired hot blast stoves and tumble drying In addition to the utilization rate of machine heat, the dust removal and purification system is equipped with dry secondary dust removal, dry and wet secondary dust removal, dry and wet multi-stage dust removal and other dust removal equipment, so as to ensure that the coal-fired drying equipment passes the EIA;Gas and oil heating: mainly use the waste heat of boiler plants, power plants, steam, or heat transfer oil, etc., through the tube reformer to technically process the steam to meet the drying heat and temperature requirements, and the steam temperature is required to be above 110 degrees You can;Coal-fired heat supply: natural gas burners, gas generators, fuel-fired engines, etc., build combustion chambers, with sufficient heat supply, sufficient combustion, and greater optimization of fuel consumption.Product Advantages1. The fixed-speed quantitative feeder is used to solve the uniformity of feeding and drying in the dryer and overcome the previous problems of intermittent feeding, material blocking, and large instantaneous material volume. It is the prerequisite for improving the evaporation intensity.2. Design a unique buffer silo and feeding mechanism to overcome the problem of intermittent feeding or fluctuations caused by uneven feeding;3. Optimizing the design of the internal structure of the dryer to maximize the heat exchange area between the material and the hot air is the basis for improving the evaporation intensity.4. Continuously optimize the design of the internal structure of the drum and the lifting plate, and finally, finalize it into the unique structure of the internal lifting plate of the drum and the mixed interval layout of different functions. The full section of the drum has a uniform "material curtain" without dead angles and gaps, and maximize Increase the heat exchange area between bentonite and hot air so that the moisture in the bentonite will quickly heat up and vaporize, and be taken away by the hot air.5. Original patented layered drying technology of rotary drum dryer. According to the different rules of heating speed and moving speed of granule materials of different sizes in the drum, several groups of layered drying devices are set up to control the power of small granule materials due to excessive drying and the phenomenon of uneven drying of large granule materials due to different heating inside and outside, so as to ensure the uniformity of drying.6. Reasonable selection of hot blast stove type, optimization of its internal structure design and masonry quality, reducing air leakage rate, lowering the oxygen content in the hot blast to less than 5%, the 700-1100oC arbitrary process requires temperature points to be adjusted at will, providing a stable heat source for the dryer, is a reliable guarantee for the high-strength operation of the bentonite dryer.7. Optimized configuration of gravity sedimentation + cyclone dust collector + wet/bag dust collector three-stage dust collection and dust removal equipment, dust concentration <50mg/Nm3, to ensure that the exhaust gas meets the emission standard.8. It solves the problem that water vapor returns to the material after the temperature of the system decreases during the same direction movement caused by the downstream dehumidification of the traditional dryer, improves the drying efficiency, and achieves the purpose of deep dehydration.9. The dryer adopts fish scales or labyrinth, expandable graphite packing type mechanical seal dual sealing mode, to ensure the safe operation of the dryer system with closed oxygen.Product ParametersModelCapacity(T/D)Initial moisture(%)Final moisture(%)Total Power(kw)Covering area(m2)JTMG191630020-30<5<>13042*16JTMG222050015046*16JTMG252280020048*16JTMG2825100025051*16JTMG3026130028052*18JTMG3228150033055*18JTMG3430180038056*18JTMG3632220045058*18JTMG3835270056060*18JTMG4036300066060*18Note: the capacity of equipment is directly related to the reduction of water content of coal. The proportion of precipitation is large, and the production capacity of equipment decreases correspondingly. Specific consulting Dingli company.Packaging & ShippingYour equipment will be well packed in containers to meet long-distance transportation. Company ProfileFounded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients' productivity, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine. Jiutian Machinery products include biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber, coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, C?te d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.FAQQ1. Quality controlAll the sand drying equipment offered by Zhengzhou Jiutian Technology Machinery Co., Ltd. is produced by China's national standard drawings, nonstandard equipment will be produced by the drawings confirmed by clients. Zhengzhou Jiutian strictly follows ISO9001, the SGS Quality management system. Most equipment will be tested for at least 8 hours in the factory before delivery. There is a record in the computer for each piece of equipment, spares can be easily confirmed when it is necessary.Q2. Way of paymentZhengzhou Jiutian offers various ways of payment, T/T, L/C, West Union, etc. All can be negotiated.Q3. Delivery timeNormal delivery time within 45 days, complete production line, or larger equipment may take longer. The exact delivery shall be confirmed when placing the order.Q4. Shipping linesPriority rules based on clients' requests, and freight cost, service, shipping date, and date of arrival shall be considered.Q5. InstallationJiutian has several experienced technicians with passports ready to go for installation when installation service is needed.Q6. Equipment warrantyThe sand drying equipment from Zhengzhou Jiutian Technology Machinery Co., Ltd. with 12 month warranty.Q7. What is the heat source of your stove?Coal, wood, rice husk, diesel, or natural gas. And our company is developing a gas stove.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...