IPDB › China Industry › Tools & Hardware
China, Chinese Rectification of Tall Buildings Lifting and Lowering Strand Jack1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Construction Equipment ToolsOther Construction Equipment ToolsSynchronous Lifting JackSynchronous Strand Jack Systems
Shaanxi Saifusite Mechanical Electrical Equipment Co., Ltd.
Preview:
Product Description Product DescriptionHydraulic Strand jack Working principle: With the cluster jack as the executive mechanism, the hydraulic pump station as the power equipment of Hydraulic Strand jack, the steel strand suspension load, the use of the jack upper and lower clamp (automatic tool anchor) alternating action and the relative movement of the jack piston and the cylinder along the steel strand, so that the weight rise (continuous translation) or the right amount of down. This principle of the Hydraulic Strand jack is the organic integration of prestressed anchor anchoring technology and hydraulic jack technology. Anchor the steel strand through the anchor, and then use the computer to centrally control the output flow and oil pressure of the hydraulic pump station (proportional valve, reversing valve and other driving devices), drive the lifting jack piston extension and contraction (displacement sensor device), and drive the steel strand and components to rise, fall and continuous translation. To realize the whole Hydraulic Strand jack and appropriate lowering of large components, the system has strong adaptability and reliability on the construction site. Working PrincipleThe working principle of synchronous lifting jack involves the cooperative operation of hydraulic and electronic control. In the hydraulic part, high-pressure hydraulic oil is produced by the hydraulic pump, and after entering the hydraulic cylinder of the jack, the hydraulic oil exerts a force on the piston. The movement of the piston in the hydraulic cylinder is transformed into the vertical lifting movement of the ejector rod, and the initial lifting ability of the heavy object is realized. The synchronous control is realized by a complex electronic control system. The sensors in the system are keen "eyes" that pay close attention to the operation details of each jack, including lifting height, speed and hydraulic pressure. When the synchronization error between different jacks is detected, the electronic control system quickly calculates and issues instructions to adjust the hydraulic oil supply and pressure value of each jack. This precise adjustment mechanism allows multiple jacks to lift heavy objects synchronously and accurately as a whole, meeting the needs of high-precision installation scenarios such as Bridges and large machineryInstallation Instructions1. Check whether the Hydraulic Strand jack is normal before use.2. Hydraulic Strand jack should strictly comply with the provisions of the main parameters, avoid ultra-high overload, otherwise when the lifting height or lifting tonnageWhen the limit is exceeded, serious oil leakage will occur at the top of the cylinder.3. such as manual pump body oil amount is insufficient, need to add to the pump should be fully filtered N33# hydraulic oil to workDo.4. Please refer to the manual for Synchronous lifting electric pump.5. The center of gravity to choose moderate, reasonable choice of jack point of impact, the bottom surface to pad flat, while taking into account the groundSoft and hard conditions, whether to liner tough wood, placing is smooth, so as not to load down or tilt.6. After lifting the heavy object, the heavy object should be supported firmly with the support in time, and the jack is prohibited as a supportUse. If you need to support heavy objects for a long time, choose CLL self-locking jack7. If you need several jacks lifting at the same time, in addition to the correct placement of the jack, should use multiple shunt valve, and eachThe load of the jack should be balanced, and attention should be paid to keeping the lifting speed synchronized. The possibility of subsidence due to uneven weight must also be consideredThe situation is to prevent the danger of tilting the object being lifted. Product ParametersModelSafe working loadWorking pressureMPACylinder strokemmRetraction heightmmJack weightKGFixed anchor weightKG Speedm/hNumber of strandsStrand diameter mmSFST-TSD454531.55001726600280-25318SFST-TSD606031.55001726630320-25418SFST-TSD10010031.550017909304670-25718SFST-TSD18018031.550018861560900-251218SFST-TSD28028031.5500193823301300-251918SFST-TSD30030031.5500194024601400-252018Company Profile Packaging & Shipping
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...