IPDB › China Industry › Instruments & Meters
China, Chinese Reliable Formaldehyde Pre Release Chamber for Environmental Monitoring1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Test InstrumentEnvironmental Test ChamberVoc Release ChamberPrecision Voc Release Chamber
Jialing Instrument Equipment (Shanghai) Co., Ltd
Preview:
Product DescriptionProduct DescriptionFormaldehyde pretreatment equilibrium release chamberFormaldehyde emission testing constant temperature and humidity chamber, formaldehyde emission test specimen pretreatment constant temperature and humidity chamber, formaldehyde emission pretreatment testing environment chamber, formaldehyde test specimen pretreatment testing chamber, four chamber formaldehyde emission constant temperature and humidity chamber, formaldehyde emission pretreatment environment chamber, four chamber formaldehyde test specimen balance pretreatment constant temperature and humidity chamber 1. Purpose and scope of use Formaldehyde test specimen balance pretreatment constant temperature and humidity chamber, formaldehyde pretreatment balance release chamber provide separate testing space, which can eliminate the mutual pollution of formaldehyde release from formaldehyde test specimens and affect the test results, greatly improving the test accuracy. The multi cabin configuration allows for cyclic testing, greatly improving the efficiency of the experiment. The formaldehyde pretreatment equilibrium release chamber is a test equipment specially produced by Muni Company for the 15 day pretreatment requirements of board samples in GB18580-2017 and GB17657-2013-4.60 standards. This equipment has multiple environmental chambers and can simultaneously perform specimen equilibrium pretreatment on different samples.Details introduction:---------(1) The formaldehyde pretreatment balance chamber system consists of a gas source section, a filtration section, a humidification system, a temperature control system, a jacket compartment, a pretreatment chamber, a system controller, and other components.(2) Interior of the cabin: Made of mirror stainless steel structure, multiple test compartments are embedded in the jacket compartment, with only the test compartment door remaining on the jacket compartment wall for easy opening. The insulation material for the cabin is flame-retardant glass fiber cotton material(3) Air source section: Imported turbine fan is used, providing an air flow rate of 20m 3/h, combined with a refrigerated air dryer to dehumidify the compressed air.(4) Filtering section: Multiple levels of filtering materials are used, including physical filtration, activated carbon filtration, and membrane filtration, to ensure that the filtered air quality meets the background concentration requirements of the testing chamber.(5) Humidification system: Adopting the wet dry gas balance method for humidification, each test chamber has an independent humidification control unit that can control the humidity of the air in each test chamber according to the setting requirements.(6) Temperature control system: equipped with heating tubes, cooling coils, circulation system, air ducts, etc.SpecificationNumber of cabinsCustomize according to requirementsInner box volume168L × Number of compartments (Each compartment has a volume of 168L, and the number of compartments is customized according to customer requirements)Internal dimensions of single cabinWidth 400mm x Depth 700mm x Height 600mmTemperature Range(20-30) ℃ (adjustment accuracy: ± 0.5 ℃)Temperature uniformity≤ ± 1 ℃Humidity Range(30-70)% RH. (Adjustment accuracy: ± 5% R.H.)Air exchange rate0.2~2 times/hour, accuracy ± 0.05 times/hourAir flow velocity0.1-2.0m/s, Accuracy ± 0.05 m/sBackground concentrationFormaldehyde ≤ 0.10mg/m 3Power RequirementsPower of about 8kw, power supply: 380V, 50hz;Humidity uniformity≤ 3% RHTemperature fluctuation≤± 0.5 ℃, accuracy ± 0.5 ℃Temperature sensor resolution:0.1 ℃Reference standardGB18580-2017GB/T32379-2015QB/T1952.2ASTM D6007-2EN 717-1, ISO 16000-9Main Products1. Formaldehyde/VOC release chamber, 2. Constant temperature and humidity test chamber, 3. Rapid temperature change test chamber, 4. Cold and hot shock test chamber, 5. Oven, 6. High and low temperature (low pressure) test chamber, 7. Three comprehensive, (temperature, humidity, vibration) test chamber, 8. Rain exposure, 9. Dust prevention test chamber, 10. Light aging test chamber, 11. Salt spray test chamber, 12. Ice water shock test chamber, 13. Mixed corrosion test chamber, 14. Photovoltaic aging test chamber, 15. Airflow test bench, 16. Tensile machine, 17. Chiller unit test chamber, 18. Large walk-in environmental test chamber, 19. Energy saving experimental equipment: Air conditioning (rail air conditioning, passenger car air conditioning, car air conditioning, commercial air conditioning, combined air conditioning cabinet) Various artificial environment simulation equipment and testing data equipment such as enthalpy difference laboratory, water-cooled chiller laboratory, compressor test bench, heat exchanger test bench, fan test bench, expansion valve test bench, automotive experimental environment warehouse, etc Waiting for other non-standard projectsCompany ProfileMuni Test Equipment(Shanghai)Co., Ltd.Muni Test Equipment(Shanghai)Co., Ltd. is a national high-techenter prise integrating R&D,production,marketing and service of environmental test equipment,and providing customers with comprehensive solutions for environmental test equipment in an all-round way.With a registered capital of 10 million yuan,the main business body has now realized the operation of the business department,and has established three comprehensive operation systems:Jialing Instrument Equipment (Shanghai) Co., Ltd is proud to presentthe Premium Dust Resistance Equipment for Comprehensive Environmental Testingfrom our distinguished division,VOC environmental cabin division,and Munidesign and research institute,with Shanghai as the center and radiating the whole country.WORKSHOP&EQUIPMENTCertificationsFAQQ: Are you a factroy or trading company? We are a professional manufacturer and provide OEM services to customers. Welcome to visit our company and factory. Q: Why choose us?A: We are a professional OEM manufacturer with l5 years of experience in R&D andproduction of polymer plastic testing instruments, and can provide production andprocessing customization.Q: How can we guarantee the quality?A: Always a pre-production sample before mass production and always a final inspectionbefore shipment.Q: What is your delivery time?A: The test machine are most in stock, so we can delivery within 3-5 working days after received the payment. We can also accept the urgent order for prompt shipment.Q: What is the shipping method?A: It could be shipped by sea,by air or by express(EMS,UPS,DHL,TNT,FEDEX and ect). Please confirm with us before placing orders.O: What about the after-sale service?A: Every machine from our factory has 12 months warranty. And we also provide life-long paid repair or service.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...