IPDB › China Industry › Industrial Equipment & Components › Industrial Pipeline Pipes
China, Chinese 8mm Microduct Water&Gas Block Connector1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Industrial Pipeline PipesMicro DuctMicroduct
Ningbo Hi-Tech Smart Machinery Co., Ltd.
Preview:
Product Description Provides a watertight and gastight sealThe internal seal can be open to blow cable through and closed after installation to provide a complete sealTube to tube connectionCaters for various cable diametersAbout MicroDuct AccessoriesMicroduct Couplers and End Stops are of a quick connect design, with pull ring release and a clear barrel for viewing. The clear barrel allows for visual inspection to determine if the duct ends are properly seated in the coupler during installation, or if the cable has passed through the coupler during the installation phase.Microduct Couplers are available two configurations; straight and transition to allow the connection of two microducts with different outer diameters. Microcouplers are rated at 175 psi with a safety factor of 4:1. Sizes and specification are listed below:Working Pressure/Temperatures:TrueSeal? Fiber Optic Fitting Working Pressure (PSI)Fitting Size.....Polycarbonate5mm.............Vacuum to 1757mm.............Vacuum to 1758mm.............Vacuum to 17510 mm..............Vacuum to 17512 mm..............Vacuum to 17512.7mm.............Vacuum to 17514mm.............Vacuum to 17516mm.............Vacuum to 175Temp. Range.....-30°F (-34°C) to +180°F (85°C)Actual working pressures will be lower at elevated temperaturesBurst pressures are four times the fittings room temperature working pressure (four time safety factor)Vacuum rating to 28 inches of Hg at room temperatureMicroduct Split Couplers are used when it is necessary to access cables at mid-span for placing slack coils. Available to fit 12mm and 12.7mm O.D. microducts.Microduct Cutters are available in two styles:Standard Straight Cutters for clean cuts prior to couplingRing Cutters are used when necessary to safely access cable in the ductMicroduct End Caps are threaded into microducts internally for pressurizing microducts prior to installing. Microduct End Caps keep microducts from imploding and add stiffness during the installation process. Available to fit 10mm and 12 and 12.7mm microducts.Microduct Coupler Removal Tool makes removing microcouplers easy saving wear and tear on hands and fingers.Digital Calipers used for measuring the outer diameters of cables and ducts to insure proper sizing and compatibility with Jetting inserts and couplers. Measurements ASME and Metric.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...