IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese R-1010 10L Rotary Vacuum Evaporator for Laboratory1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Other Chemical Equipment Machinery10L Rotary EvaporatorVacuum Rotovap
Xi'an Heb Biotechnology Co., Ltd.
Preview:
Product Description R-1010 10L rotary evaporator Introduction: The evaporation bottle rotates at a constant speed and the water bath is heated at a constant temperature. Under this condition: the material forms a large-area uniform thin film on the inner wall of the evaporation bottle for quick evaporation. The evaporation efficiency can be improved under vacuum conditions (a vacuum device needs to be connected). When the solvent vapor passes through the glass condenser coil, the vapor is cooled to a liquid ( a cooling device need to be connected) and recycled in a collection flask. This series of products needs to be equipped with vacuum devices (circulating water type, rotary vane type, diaphragm type and other vacuum pumps), or cooling and circulating devices to form a system devices.Basic configuration:? The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.? The stent is made of cold plate anti-corrosive spray+ aluminum alloy material, and the bath is made of 304 stainless steel.? The sealing system uses PTFE + fluororubber compound sealing.? Oily vacuum pressure gauge shows real-time vacuum by pointer.? The piston-type feeding valve is sleeved with PTFE extension tube, which can be continuously fed to the evaporation bottle under vacuum status.? Upright double-layer serpentine coil as condenser, main condensing+auxiliary condensing double condenser.? Large LCD display, which can control rotation, heating and lifting at the same time? Using brushless deceleration booster motor as rotary motor, no spark and low noise.Lifting motor also uses deceleration booster motor.? Thermostat controlled bath, with PT100 sensor + stainless steel probe at the bottom of bath? The bath can be lifted electrically. A silicone cover is equipped outside the bath for heat insulation and anti-scalding.? Rotating and heating double fuses safety protection? The collection flask has a lower discharging port, equipped with glass + PTFE independent discharge valve.? There is a water discharging valve at the bottom of the bath to facilitate liquid discharge? Vacuum switching valve can continuously collect and discharge materials without affecting the system vacuum and solution distillation? Over-temperature protection function, when the actual temperature> setting temperature+5 oC, the machine will automatically power off.? Anti-drying function, when the water level in the heating bath is lower than the heating tube, the machine will automatically power off.? If the power is suddenly cut off while the machine is working, the machine will automatically stop heating when the power is turned on againTechnical Parameters: ModelR-1010Voltage/Frequency220V 50Hz/110V 60HzTotal Power3100WRotary motor power60W1/5Lifting motor power40W1/12.5Heating power3000WVacuum0.095MpaRotary flask volume10LΦ280mm/Φ95 flange portCollecting flask volume5LΦ230mm/upper Φ60 flange port×Φ35 flange port×2 pcs×lower Φ50flange portRotary speed0-120rpm/minTemperature control rangeRoom temperature-180oCTemperature control accuracy±1oCBath lifting stroke190mmCondenser dimensionMain condenser Φ120×620H(mm), upper Φ60 flange port, lower Φ80 flange portAuxiliary condenser Φ135×475H(mm), upper Φ80 flange port, lower Φ60 flange port, side Φ60 flange portCondensing area0.51(0.33+0.18)m2Gas cylinderLeft Φ35 flange port, upper Φ35 flange port, side Φ60 flange port, right Φ60 flange portMaterial feeding valveΦ35 flange port, glass+PTFE valve, material feeding valve(pagoda joint) with 12mm outer diameterTemperature measuring portΦ35 flange port, glass+PTFE valve, glass valve (pagoda joint) with 12mm outer diameterReleasing valveΦ35 flange port×2, glass+PTFE valve, releasing port(pagoda joint)with 12mm outer diameterMaterial discharging valveΦ50 flange port, side discharging valve (pagoda joint)with 20mm outer diameter, 210mm from the groundVacuum nozzleΦ60 flanged glass nozzle(pagoda joint)with 10mm outer diameterIn and out circulating nozzle of condenser coil Pagoda joint with 16mm outer diameterBath dimension/weight Φ350×220H(mm) about 21L Overall dimension(W*D*H)1130×470×1940mmNet weight64KGPacking dimension980×520×1190mm wooden package 0.61m3Packing weight101KGPackage & Delivery:Factory:Certification:
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...