IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese Cht-4646 Diamond Wire Multi-Line Sawing Machine, Used for Batch Slicing or Cutting Into Blocks of Jade, Agate and Natural Stones1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Stone Cutting MachineUsed for Batch Slicing or Cutting Into Blocks of JadeAgate and Natural StonesHigh-Performance Solution MachineSemi-Conductor Solution Machine
Yutian Changtong Eiectron Co., Ltd.
Preview:
Product Description The application of CHT-4646 diamond wire multi-line sawing machine: This model was developed to meet customers' requirements for cutting efficiency and cost reduction. The roller length is 490mm, and the maximum loading area is 460mm * 460mm * 490mm. It combines low operating costs with high cutting efficiency, capable of cutting products with thickness ranging from 2mm to 15mm. This model can be optionally equipped with a swing function, making it more suitable for processing harder products and those with higher surface roughness requirements. Technical specifications of CHT-4646 Diamond Wire Multi-line Sawing Machine: unitparameterMaximum Worksizemm460*4600*490cutting thicknessmm2--15running speedm/min0~2400Table lift strokemm220Table cutting feed speedmm/hour0.1~10The amount of wire output from the supply wheelKm10(φ0.35diamond wire)Diamond diametermmφ0.20~φ0.45axleRoller outside diameter*number of axlesmmφ490φ180*4boundary dimensionmm≈3365*2220*2700machine weightKg≈7500power AC380V/60HZ three-phase four-wireTotal machine power ratingKw Product features of CHT-4646 Diamond Wire Multi-line Sawing Machine 1. The entire equipment is cast as a single piece, processed in one go, reducing cumulative assembly errors, ensuring stable operation at high speed and maintaining cutting quality.2. Four motors drive four rollers independently, making all four rollers active shafts, reducing the wear of the steel wire on the rollers and increasing the service life of the rollers.3. The installation holes for the roller supports are processed as one piece using a machining center, ensuring the coaxiality requirements for the main shaft installation.4. Optional swing function can further improve the roughness of the product cutting plane and increase processing efficiency (Patent No.: CN2023111258268.5).5. The equipment has a highly reasonable design (Patent No.: CN202220869595.4), with a height of only 2700mm, significantly reducing the floor space and highlighting the simplicity and safety of the equipment operation (Patent No.: CN202330535804.1).6. The upper-mounted worktable allows materials to be cut from bottom to top, facilitating loading and unloading.7. The loading area is large, measuring 460mm * 460mm * 490mm, significantly enhancing the cutting efficiency.8. The rollers are positioned by double cones, operating at high speed with stable performance and reliable accuracy.9. The main shaft accuracy is ≤ 0.01mm, using a dust-proof structure (Patent No.: ZL201320681902.7), ensuring more stable operation, and facilitating disassembly and assembly.10. The operation is convenient, with an automatic lifting guard, the worktable fully extended, facilitating material loading and unloading and the disassembly and assembly of the rollers.11. High efficiency and low consumption, the equipment does not require an air source, and the total power consumption of the entire machine does not exceed 25kw.Our advantagesThe company has been engaged in the cutting, grinding and polishing of quartz crystals for 27 years. It has a highly complete processing technology experience and its own R&D design center. It can provide a complete set of cutting processes, technical support and personnel training plans for initial cooperation customers based on the characteristics of the products. It has been professionally developing multi-line cutting machines for 15 years, providing multi-line cutting equipment with high cost performance, high cutting efficiency and low single-piece cutting cost for users. It also provides overall solutions for diamond multi-line saw machines.Match equipment according to customer's product requirements (provide private customization) → Installation and debugging of multi-line equipment → Personnel operation training, design of cutting process → After customer's satisfaction and acceptance, technicians leave the factory → Provide technical video guidanceCHT-4646 Diamond Wire Multi-line Saw Machine Training Plan. The CHT-4646 Diamond Wire Multi-line Saw Machine is designed to emphasize that personnel who have never operated a wire cutting machine can quickly receive training and immediately start operating the machine. Therefore, all operation buttons, operation handles, and equipment screens are designed and assembled based on the concepts of simplicity, practicality, safety, and reliability.. After the training course contract is signed, the equipment is delivered to the factory. On the production site of your company, we provide two aspects of training to our customers: 1. Explanation and training on machine operation, fault elimination, daily maintenance and repair. 2. Training and guidance on cutting processes based on customer product characteristics.CHT-4646 Diamond Wire Multi-line Saw Machine After-sales Service. The machine equipment itself has excellent performance and quality. 365-day dedicated staff are available for consultation. The phone number is 0315-5057575. We promise to provide free technical consultation services and technical guidance on cutting processes to the buyer.. Fast and effective after-sales service. We provide one-year equipment maintenance service. When the machine fails and the buyer cannot resolve it, our after-sales personnel will arrive at your company for service. Common operation faults are explained in the manual.. Lifelong free upgrade of equipment software and hardware. We promise to provide preferential services.. The company adheres to the principle of prevention first. For foreign customers and those with locations relatively far from China, while producing the products stipulated in the production contract, corresponding important accessories are also produced. In case of failure of the supplied products, accessories can be sent immediately, saving the response time for after-sales service.Note: In the Chinese market, diamond multi-line saw machines are called multi-line cutting machines.The slot wheel of the diamond multi-line saw is this accessory, and the name may vary.Company ProfileYutian County Changtong Electronics Co., Ltd. was established in 1998. Its headquarters is located in China, in the core of the Bohai Economic Circle - Tangshan, Hebei Province. In 2008, it set up a branch in Yantai. It is a national high-tech enterprise integrating R&D, production, sales and service. After more than 20 years of deep industry exploration, the company has become a leading brand in the field of piezoelectric crystal materials and multi-line cutting technology in China, and its products are exported to international markets such as Indonesia, South Korea and Russia.Core advantagesNational-level technical strength- Has obtained multiple qualifications such as "National High-tech Enterprise", "Hebei Province Technology-based Small and Medium-sized Enterprises", "Hebei Province Specialized and Innovative Small and Medium-sized Enterprises", "Hebei Province Enterprise Technology Center", "Hebei Province Leading Enterprise in Characteristic Industrial Cluster"- Has over 10 invention patents, 30 utility model patents, and 2 software copyrights, continuously promoting industry innovationFull-chain layout- Three core businesses: multi-line cutting equipment, precision mechanical processing, quartz crystal materials (HC-49S/SMD cumulative production and sales of 6 billion pieces)- Independent design capability: Provides one-stop solutions from equipment research and development to cutting process optimizationHigh-end manufacturing capability- Equipped with five-axis machining centers, high-precision horizontal boring machine machining centers, various machining centers, various grinding machines, advanced testing equipment, etc., ensuring product consistency- Collaborative research and development with universities and research institutions: Continuously enhances technical barriersGlobal market recognition- Products cover the whole country and are exported to multiple countries and regions, serving high-growth industries such as electronics, semiconductors, and magnetic materialsTechnical milestonesPatent technology:- "A Knife Holder for Multi-line Cutting Machine and Multi-line Cutting Machine" solves the market application of thick sheet processing in multi-line cutting machines- "A Dual Loading Multi-line Cutting Machine" can process one sheet material to two sheet materials simultaneouslyVisionWith precision cutting technology as the core, promote the global process of China's high-end manufacturing equipment and electronic components, and become an internationally renowned intelligent cutting solution providerCompact yet mighty, this small multi-line cutting machine comes equipped with diamond line processing and is available in both single and double station models. Tailored for small batch straight sheet processing, it allows for easy and quick specification changes, accommodating cutting sheet thicknesses from 2mm to 15mm. It seamlessly supports both single-line and multi-line cutting for applications involving hard and brittle materials, ensuring flexibility and precision. >Stable Wire Web Control: Achieve Precision and Reliability with Unmatched EaseUtilizing a cone-positioned structure, our rollers and wire spools deliver unparalleled accuracy and rigidity, effectively minimizing wire web shaking, ensuring smooth, precise operations every time.>Optimized Pulley System: Masterfully Engineered for Unrivaled PerformanceOur expertly crafted 8-pulley system is designed to reduce diamond wire torsion, minimize tension fluctuations, and significantly decrease the wire breakage rate, offering exceptional performance and reliability.>Easy Wire Winding: Efficiency Simplified for Seamless OperationsOur standard universal spool (PV600 reinforced I-wheel) eliminates the need for rewinding, streamlining your operational process and enhancing efficiency effortlessly.>Safety Guarantee: Raising the Bar for Protection StandardsOur main operation door, equipped with an electrical lift and built-in safety devices, ensures secure access, providing an elevated standard of protection at all times.>Wire Break Memory System: Unlock the Power of Innovation with Our Cutting-Edge Solutions for Seamless and Continuous Performance>Easy Operation: Thoughtfully Designed for Unmatched User Convenience and Effortless FunctionalityBoasting open access on three sides, our state-of-the-art cutting room simplifies your workflow, ensuring smooth and hassle-free operation and maintenance while delivering an unparalleled user-friendly experience. (Tangshan Factory Area, Hebei Province, China) (Yantai Factory, Shandong Province, China) Assembly Workshop One (Assembly Workshop Two) (Assembly Workshop No. 3) Large 5-axis machining center (Large horizontal gantry milling machine) (Large five-axis CNC machining center) (Precision cylindrical grinding machine)
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...