IPDB › China Industry › Instruments & Meters › Analysis Instrument
China, Chinese Rotary Viscometer Zahn Flow Cup Ndj-1, Suitable for Paint, Ink, Paste, Coating1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Analysis InstrumentOther Analysis InstrumentsSuitable for PaintInkPasteCoatingFlow Cup ViscometersZahn Flow Cups
Shenzhen Rongzhitai Packaging Technology Co., Ltd.
Preview:
Product Description Product DescriptionRotary viscometer NDJ-1Application in oils, paints, paint, medicine, food, cosmetics, adhesives and other various fluid viscosity measurement, can also be used for the measurement of liquid viscosity and absolute viscosity resistance Origin: ChinaModel: NDJ - 1Measuring Range:10-100000mpa.sApplication in oils, paints, paint, medicine, food, cosmetics, adhesives and other various fluid viscosity measurement Installation InstructionsMatters needing attention:1. This instrument is suitable for use in normal temperature conditions.2. The instrument must be measured within the specified frequency and voltage tolerance range; otherwise, it will affect the measurement accuracy.3. It is recommended to fix the instrument with a stand for measurement. If handheld operation is necessary, ensure the instrument is stable and level.4. Be careful when installing and removing the rotor. When installing or removing, slightly lift the connecting screw to operate, do not apply excessive force, and avoid lateral force on the rotor to prevent it from bending.5. After installing the rotor, do not place the instrument upside down or sideways.6. Always change the speed when the motor is running.7. Keep the connecting screw, the rotor connection end face and the thread clean; otherwise, it will affect the correct connection of the rotor and its stability during rotation.8. When lifting or lowering the instrument, support it with your hand to prevent it from falling due to its own weight.9. After each use, remove the rotor for cleaning promptly (do not clean the rotor on the instrument). After cleaning, store it properly in the rotor box.10. Do not "rotate" the instrument without liquid after installing the rotor to avoid damaging the shaft tip.11. Do not disassemble or adjust the instrument parts at will, and do not add lubricating oil by yourself.12. When moving or transporting the instrument, use a rubber band to encircle the pointer control rod, and put on the yellow protective cap to support the connecting screw, and tighten the screw on the cap.13. Many suspensions, emulsions, polymers, and other high-viscosity liquids are "non-Newtonian liquids", whose apparent viscosity changes with shear rate and time. Therefore, it is normal for the results to be inconsistent when measured under different rotors, speeds, and times. This does not mean the instrument is inaccurate (generally, the measurement of non-Newtonian liquids should specify the rotor, speed, and time).14. To obtain more accurate values, please follow the following points:a. Precisely control the temperature of the liquid being tested.b. Immerse the rotor in the liquid being tested for a sufficient period of time while maintaining a constant temperature to ensure it reaches the same temperature as the liquid.c. Ensure the uniformity of the liquid.d. When measuring, place the rotor as close to the center of the container as possible.e. Prevent air bubbles from adhering to the bottom of the rotor when it is immersed in the liquid.f. Change the rotor or the rotational speed to make the reading on the scale disk deviate somewhat.g. Use a protective frame for the measurement.h. Keep the rotor clean.i. When the power frequency is inaccurate, correct it according to the correction formula. Product ParametersTechnical ParametersModel NumberNDJ-1Measuring Range10-100000mpa.sRotor Quantity1-4Rotation speed6r/min 12r/min 30r/min 60r/minAccuracy of measurement+-5%(Newtonian liquid)PowerPower adapter( Input 220 V 50 ± 1Hz, Output 15V 1.2A) Detailed Photos
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...