IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese Hand Held Pneumatic Rock Drill Yo18 Air Leg for Mine Rock Drilling1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Mine Drilling RigPneumatic Rock DrillJack Hammer
Tianjin Baptech Machinery Co., Ltd.
Preview:
Product Description Product Description YO18 Hand Hold and Air Leg Rock DrillWeight18kgLength550mmCylinder diameter58mmPiston stroke45mmAir hose inner diameter19mmWater hose inner diameter8mmShank sizeH22×108mmWater pressure0.2-0.3MpaWorking pressure0.4-0.5MpaLubricatorFY200Weight0.9kgCapacity150ml Safety instructionsTo ensure the risk of serious injury or death to yourself or others, carefully read through this instruction booklet before putting the rock drill to use. Always follow the instructions given. Always wear safety helmet, goggles and ear protectors during drilling. Any local regulations that exist must also be observed.When drilling in certain minerals, there is a risk of spark generation. Before starting work, check that the machine is approved (in accordance with local regulations) for work under such conditions.Check that the hoses used are of the right quality, and that all hose connections are in good condition and properly tightened.Before starting work on any of the systems, make sure that the air and water systems are without pressure.Make sure that there are no concealed wires or other sources of electricity. Never drill near any electric wires or other sources of electricity.Staring the rock drill Open the main valve for compressed air.Open the cock for the flushing water.Adjust the feed control lever to given a suitable feed force for collaring the hole.Align the rock drill so that the working tool touches the desired collaring point.Move the throttle lever forward a little, which will start water flushing, percussion and rotation.Collar the hole with reduced feed force.Move the throttle lever fully forward once the working tool has gained a secure footing in the rock.Adjust the feed force by means of the control lever so that the maximum penetration rate is obtained.Note! Do not bend the working tool as this will increase wear of the shank bushing and piston. Furthermore, it can also affect drilling efficiency and increase the risk of working tool breakage.Stopping the rock drillPull the throttle lever backwards, which will stop percussion, rotation and flushing water. Detailed PhotosRelevant products YT27 Pusher Leg Rock DrillY24 Hand Hold Rock DrillYSP45 Stoper Rock DrillYT29A Pusher Leg Rock Drill
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...