IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese 3hna027103-003 Pressure Sensor Gas Pressure Monitoring Original for ABB Robots1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Other Industrial RobotRobot Spare PartsPressure Sensors
Beijing Zhongping Technology Co., Ltd.
Preview:
Product Description 3HNA027103-003 Pressure Sensor for Robotic SystemsThe 3HNA027103-003 is a piezoresistive pressure transmitter designed for precise force monitoring in industrial robots and automation cells.It offers a pressure range of 0-1000 bar,a 4-20 mA analog output,and excellent media compatibility with hydraulic oils.This sensor ensures reliable performance in demanding applications like die casting,forging,and material handling,providing critical data for process control and equipment safety.Product ParametersParameter Name Parameter ValueProduct Type Pressure Sensor/TransmitterModel 3HNA027103-003Pressure Range 0-1000 barOutput Signal 4-20 mA analogSupply Voltage 10-30 V DCAccuracy±0.5%Full Scale(typical)Media Compatibility Hydraulic Oils,HFA,HFB,HFC FluidsProcess Connection G1/4"MaleElectrical Connection DIN 43650 ConnectorProtection Rating IP67Operating Temperature-25°C to+85°CProduct FeaturesThis robust sensor features a stainless steel diaphragm and a hermetically sealed housing for long-term stability in harsh environments.Its compact design allows for easy integration into tight spaces on robot arms or within tooling.The 4-20 mA output provides noise-resistant signal transmission over long distances to the control system.AdvantagesThe primary advantage is its high reliability under extreme pressure spikes and vibration,minimizing unplanned downtime.It offers excellent long-term stability,reducing the need for frequent recalibration.Compatibility with standard industrial fluids lowers the risk of corrosion and sensor failure.Application ScenariosA key application is in robotic die-casting cells for monitoring hydraulic clamp force to ensure mold integrity.It is also used in forging presses to control ram pressure for consistent part quality.In material handling,it safeguards robotic grippers by monitoring pneumatic or hydraulic pressure.Usage InstructionsMount the sensor directly to the pressure port using the G1/4"connection,ensuring a proper seal with the recommended thread sealant.Connect the power supply and signal wires to the designated controller input.Power on the system and verify the output signal corresponds to the applied pressure using a multimeter or the control system's diagnostic page.PrecautionsAlways ensure the media is compatible with the sensor's wetted materials to prevent damage.Avoid applying pressure beyond the specified maximum range to prevent sensor failure.Use appropriate electrical suppression if installing in circuits with inductive loads.Frequently Asked QuestionsWhat is the operating voltage range for the 3HNA027103-003 sensor?The 3HNA027103-003 pressure sensor operates on a DC supply voltage ranging from 10 to 30 volts.This wide range offers flexibility,allowing it to be integrated with various standard industrial power supplies commonly found in control cabinets.It ensures stable operation even when there are minor fluctuations in the input voltage.The 4-20 mA output signal is proportional to the supply voltage within this specified range,maintaining accurate pressure measurement.It is crucial to use a well-regulated power source to prevent electrical noise from affecting the sensor's performance and signal integrity.How do I calibrate the 3HNA027103-003 pressure sensor?Calibration typically requires a reference pressure source,like a deadweight tester or a high-accuracy calibrator,and a precision multimeter to read the output current.Apply zero pressure and adjust the sensor's zero potentiometer until the output reads exactly 4 mA.Then,apply the full-scale pressure and adjust the span potentiometer for a 20 mA output.This two-point calibration process ensures accuracy across the entire measurement range.For critical applications,it may be necessary to check and adjust at several intermediate points.Always follow the detailed procedure outlined in the official technical manual for your specific sensor variant.What fluids are compatible with this pressure sensor?The sensor's wetted parts,typically the stainless steel diaphragm,are compatible with a wide range of standard industrial hydraulic oils and fluids such as HFA,HFB,and HFC types.This makes it suitable for most hydraulic systems found in robotic and automation applications without risk of corrosion.However,it is essential to avoid media that contain solid particles or are highly viscous,as they can clog the pressure port.Also,aggressive chemicals or solvents not listed in the compatibility chart should be avoided to prevent damage to the sensing element.Can this sensor be used for high-pressure hydraulic applications?Yes,the 3HNA027103-003 is specifically designed for high-pressure environments with a range extending up to 1000 bar.Its robust construction with a stainless steel diaphragm and durable housing can withstand the pressure spikes and pulsations common in hydraulic systems.The design ensures high fatigue resistance,providing a long service life even under continuous cyclic loading.It is an ideal choice for monitoring hydraulic pressure in presses,injection molding machines,and other heavy machinery.What is the difference between a pressure sensor and a pressure transmitter?A pressure sensor is the fundamental element that converts pressure into a mechanical signal.A pressure transmitter,like this unit,includes the sensor plus additional electronics to condition and convert that signal into a standardized output,such as 4-20 mA.This standardized signal can be easily interpreted by controllers.The transmitter provides a more robust and amplified signal that is less susceptible to noise over long cable runs.The term"transmitter"often implies a higher level of functionality and integration compared to a basic sensor.How do I troubleshoot a faulty 4-20 mA output signal?First,check the power supply voltage at the sensor's terminals with a multimeter to confirm it is within the 10-30 V DC range.If the power is correct,disconnect the sensor and measure the output current loop directly;a reading of zero might indicate a broken internal circuit.If the current is stuck at zero or full scale,the sensing element or electronics may have failed.Also,check for short circuits or ground faults in the wiring,which can distort the signal.Comparing the reading to a known good pressure value helps isolate the issue.Is the 3HNA027103-003 suitable for outdoor use?While the sensor has a high IP67 protection rating,making it dust-tight and capable of withstanding temporary immersion in water,its suitability outdoors depends on specific conditions.The operating temperature range of-25°C to+85°C covers most ambient climates.However,prolonged exposure to direct sunlight,rain,or corrosive atmospheres without additional protective enclosures could reduce its lifespan.For permanent outdoor installation,consider using a protective cover or junction box to shield it from the elements.What is the expected lifespan of this pressure sensor?The lifespan of the 3HNA027103-003 sensor is typically very long,often exceeding tens of millions of pressure cycles,when operated within its specified ratings.Factors that influence longevity include the operating pressure range,media compatibility,and the level of vibration and shock in the application.Proper installation and avoidance of pressure overloads are critical for maximizing service life.Regular maintenance checks can help identify potential issues before they lead to catastrophic failure.Where can I find the datasheet for the 3HNA027103-003 sensor?The official datasheet and other technical documentation can be downloaded from the website's support or product portal.You will need to search using the full model number"3HNA027103-003"or the product description.'s local distribution partners can also provide these documents upon request.Having the correct datasheet is essential for verifying specifications,connection diagrams,and installation guidelines before integrating the sensor into your system.Can this sensor measure dynamic pressure changes?This sensor is primarily designed for static or slowly varying pressure measurements due to its operating principle and response time.While it can track changes,its frequency response may not be sufficient for very fast dynamic events like water hammer or rapid pressure oscillations.For applications requiring high-frequency dynamic pressure monitoring,such as in combustion analysis,a specialized dynamic pressure transducer with a much faster response time would be more appropriate.Always check the sensor's datasheet for its specified response time. Beijing Zhongping Technology Co., Ltd. is a leading provider of industrial automation solutions, intelligent robotics, and advanced system integration services. With decades of expertise, the company has established long-term strategic partnerships with global industry leaders such as Siemens, , Schneider Electric, KUKA, Yaskawa, and FANUC, leveraging their cutting-edge technologies to deliver innovative, tailored solutions across diverse sectors.Specializing in technical support, product distribution, and end-to-end engineering services-including system design, installation, commissioning, and maintenance-Beijing Zhongping Technology ensures seamless operational efficiency for clients in industries spanning automotive manufacturing, battery production, aerospace, oil and gas, chemical processing, food and pharmaceuticals, logistics, metallurgy, and heavy machinery. By harnessing its robust global supply chain network and a highly skilled technical team, the company guarantees precision-driven resource allocation, rapid response capabilities, and cost-effective procurement strategies. These capabilities empower clients to streamline operations, reduce downtime, and enhance competitive advantage in dynamic markets. Committed to excellence, Beijing Zhongping Technology remains dedicated to advancing industrial innovation while fostering sustainable growth and value creation for enterprises worldwide.Q1: What is the core business scope of Beijing Zhongping Technology Co., Ltd.?The company's business scope primarily covers comprehensive industrial robot supply chain services, industrial automation technologies and technical services, digital smart factory solutions, and hydraulic intelligent control products and services.Q2: Which brands does the company collaborate with?The main cooperative brands of the company are SIEMENS,,Schneider,DELTA,WEINVIEW,MCGS,ADVANTECH,OMRON,Simphoenix,RITTAL,MOXA,ESTUN, RKC, YASKAWA, HIKVISION, FANUC, MITSUBISHI ELECTRIC, KUKA, Fuji Electric, SICK, Walvoil, CASAPPA, EATON, Bosch Rexroth Group, Parker etc.Q3: What are our competitive advantages compared to other suppliers?With our robust supply chain capabilities and global presence, we deliver faster, more efficient services. We strive to offer the best possible prices to demonstrate our sincerity and value.Q4: How long does delivery take? What about shipping costs?Delivery timelines and shipping costs depend on the specific model(s) and quantity you require. Please share your current needs with us for precise details.Q5: Can't find the model you need?We showcase only a selection of models here. If you cannot find your desired model, contact us directly for further assistance.Q6: How to contact Beijing Zhongping Technology Co., Ltd.?Beijing Zhongping Technology Co., Ltd.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...