IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese CNC Busbar Cutting Punching Bending Machine Copper Made in China1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Busbar MachineBusbar Machine for CopperBusbar Machine Manufacturer
SHANDONG JINGPENG CNC MACHINERY CO., LTD.
Preview:
Product Description Product description:This series CNC Copper Busbar cuttin punching bending machine for copper made in China has three units: punching shearing and bending. It is easy to adjust each unit to shorten the processing time and improve the production efficiency.The bending unit uses the imported PLC control system, which has a stable system and high precision. It is used to process copper and aluminum busbars in different specification. By relative operation unit it can and quickly do all kinds of processing to copper and aluminum Busbar, such as shearing, punching(circular hole and oblong hole), flat/Vertical bending and knurling.change different mold to do special processing to copper bar, such as flat press, embossing, cable connector process, and can do cutting,flat Crushing pushing and bending.FunctionModelJPSK-303ESKJPSK-503ESKPunchingMax.punching force(kn)300500Punching diameter range(mm)4.3-254.3-30Max.thickness(mm)1216Max.width(mm)160200Shearing/CuttingMax.shearing thickness(mm)1216Max.shearing width(mm)160200Horizontal bendingMax.bending force(kn)300500Max.width(mm)160200Max.thickness(mm)1216Horizontal bendingMax.width(mm)100120Min.angle(Degree)90°90°Out dimensionmm1780*1380*14201850*1500*1550Powerkw3x4kw3x5.5kwWeightKg1400kg1950kgCNC precisionBending precision±1°±1°Repeat bending precision±0.3±0.3 Main Features:The shearing unit adopts the universal frustration shearing, the cutting is smooth without burrs, the appearance is beautiful, and the cutting is free of waste.The punching unit uses a united six-mode turnplate in tooth shape to make sure the upper mold and the lower mold are absolutely in the center, improve the mold concentricity and extend the working life.The turnplate is in tooth shape with a good view and high strength. No need to frequent change molds, labor intensity is highly reduced. It is easy and quick to use. Producing efficiency is obviously higher than a traditional one.The bending unit uses a double-decker working table, which can make sure that three working positions can do their respective at the same time without bothering the others. By changing different mold it can do flat bending and verticle bending. Input an busbar thickness and an angle on a Controller touching screen, or input height and a side length to get the result what you need, such as Z bending. Bending precision is ±1,repeat precision ±0.3 .The user can input processing data in advance, and the system will do the process according to the rebound data. The field data can be put into the system at any time and paged out for using repeatedly.The machine has four casters so it is easier to be moved everywhere. There are two operating modes, manual button, and footswitch, which is easy for a worker to operate and use. Based on the user's requirement, it can do all kinds of special Shape processing with different molds or equipping parts.Bus bar Cutting 1.cutting unit:1) sharp shearing,no droop,no burrs,no waste.2)3 ways to prevent busbar from moving.3)two kind of switches(foot switch and press button).4)beveled knife,easy to cut.5)the four sides of the knife can be exchanged to cut.6)measuring ruler measure the length of busbar.Bus bar Punching 1)united six-mold turnplate to make sure the upper mold and the lower mold are absolutely in the center.2)the turnplate in tooth shape to make sure a good view and high strengh.3)three location modes:locating pin,locating ruler and light.4)no pressing mark on the workpiece surface.5)can punch non-standard hole.6)2 limit switches(foot switch and press button).#Punching dies: 8 sets of standard punching dies(choose from the following size)The price is including in the machine price.Round punching dies(mm):Φ7,Φ9,Φ11,Φ13,Φ15,Φ17,Φ19,Φ21Oval punching dies(mm):Φ7*11,Φ9*13,Φ11*15,Φ13*18,Φ17*21Arc punching dies(mm):R5,R10,R15We can also customise the punching dies as your requirement. Bus bar Bending(automatic) #Bending unit1)make horizontal bending,vertical bending U-bending,embossing and twisting.2)just input the thickness and the angle on the CNC touching screen,get the busbar shape.3)high bending precision ±1°,repeat bending ±0.5°.4)automatically account the processing busbars if quantity production.5)control the bending speed by the CNC touching screen.6)inch moving to complete the repeat bending.7)double tables to make sure work with the punching,cutting units at the same time.Processed SamplesFactory
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...