IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese China Hot Sale 3-Axis Glue Dispenser Vision CCD Glue Dispensing Potting Machine1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Glue Dispensing SystemVision CCD Glue Dispensing Potting Machine3-Axis Glue Dispenser
Guangzhou ZhengQi Technology Co., Ltd.
Preview:
Product Description PGV-502 3-Axis Vision CCD Glue potting machine , glue dispensing machine PGV vision glue potting machines are the fully automatic glue potting machine launched by Daheng automation. This machine is aiming at epoxy resin , polyurethane, silicone and other two-component materials for materials mixing and automatic perfusion. Applications :The equipment has the characteristics of accurate proportioning and quantitative consistency ,which can improve the quality and output of production . It can be equipped with dual-liquid mixing equipment to improve the efficiency of perfusion . In addition, it can be equipped with auxiliary equipment such as assembly line , baking path and multi -station rotating platform . PGV501 The vision system glue potting machine has outstanding characteristics as following:Ultra - high precision double cylinder plunger pump, glue stable and easy to use. Daheng core patent plunger pump technology, with unique, innovative, practical, advanced; A new generation of fluid measurement ratio control with high accuracy, variable, uninterrupted and long life is realized.The machine has automatic glue dispensing function, can match 1:1 to 10:1 within the two-component glue, can automatically match, automatic mixing, automatic mixing, automatic completion of the machine, do not need manual matching, is an online type of glue dispensing, to fill the amount of glue, how much glue dispensing, dispensing good glue is immediately to the product .High-precision CCD vision capture and positioning, high-precision imported servo screw three-coordinate linear manipulator mobile device, to achieve high-precision positioning control, accuracy ±0.03mmMotion control card: high-speed dot and line drawing and various irregular motion control; Teaching programming is adopted . Various of needles:glue mixing and dispensing evenly . Alarm function: the drums of A and B are equipped with alarm and induction devices of lower positionVacuum feeding: both barrel A and barrel B can automatically vacuum feeding, which is helpful to eliminate air bubblesDiaphragm pump feeding: A, B drums can automatically feed diaphragm pumpAutomatic cleaning: the mixed part of AB adhesive is automatically cleaned with gas and liquid .Anti-curing procedure, the machine can set the glue interval time according to the time of glue curing, to prevent the glue curing caused by the occasional stop during the working time, causing the machine to block up.Equipment introduction1 .Overall technical parameters:Glue mixing ratio100:100-100:10 Optional Working area600(X)*600(Y)*100mm(Z)(effective:400mm(X))Working pathDot, line , arc , circlePositioning methodCCD Visual capture positioningVision systemVisual capture and positioning system softwareMotorServo motor (Japan), lead screw + slider (Taiwan brand)Production line functionOptional matching function of production line (customized production line according to customers' products)Speed 500mm/s(displacement speed)1-12ml/s(Single pump glue rate)Accuracy ±0.03mm (repeatability)±2%(potting)±2%(mixing)Glue dischargeAutomatic origin/fixed point glue discharge safetyFront door/safety gratingProgram memory99pcsInput air pressure0.5MPa-0.7MPaViscosity50cps~PasteOperation modeManual /AutomaticRatioPLC/ plunger pump/gear pump/screw pump FlowDigital inputTeaching modeTeaching programmingautomatic control systemPC,Touch screen (realize program programming, modification, storage, etcOut-glue control systemAB glue suction valve, realize AB glue independent operationMixing modeDynamic and static optional, instant mixing, convenient cleaning TankStainless Steel(40L),(25L),(10L)optionalPower supply 220V/50Hz/1.5kW(without heater)Dimension1900mm×1650 mm×2100mmLine body height850-950(Can be customized)Line body widthMax 550mm(Vision 400mm)(can be customized)The conveyor line bodyBelt/double chain / rollerLine body loadAs per productionPositioningclamping positionBlocking cylinder 3 pcs (default)2.Description of equipment schematic diagramAccording to the instructions issued by the control system, the dispensing machine completes the dispensing and conveying of glue to the mixing system, and the CCD visual capture gives the command. The three-axis manipulator carries the mixing system part, and the quantitative positioning is carried out at the same time. The mixing part of the equipment is equipped with the automatic cleaning function.4. Introduction of machine structure and main components :PGV501 is mainly composed of the following parts: visual positioning system, machine frame, storage tanks , proportioning system, mixing system (double liquid valve), cleaning system, coordinate linear manipulator, conveying line body, control system and so on4.1 visual positioning system: the CCD vision is used to capture the positioning, and the three-coordinate linear robot arm is processed by software to send commands for positioning.4.2 Machine frame: adopt sheet metal welding frame structure to provide support and reference for the whole equipment.4.3 Tanks: the tank is equipped with agitator, vacuum suction function, vacuum stripping function, high/low liquid level sensor, and the bottom of the tank is equipped with cut-off ball valve, constant temperature heating, temperature sensor, filtration and other auxiliary devices. The main features are as follows::1) the stainless steel plate vacuum pressure tank can withstand the vacuum negative pressure in the tank .2)There are electric agitators in tanks, so stirring can prevent precipitation and layering of the A /B glue, and make the temperature of glue in tanks more even;3) The glue tank level sensor: When the glue is lower than the set level, it will automatically alarm and remind to add glue;4) Tanks can be equipped with vacuum defoaming function optionally (defoaming time can be set by touch screen), which also can automatically feed glue through vacuum negative pressure, and the relevant valves will automatically close before glue feeding, and the relevant valve will automatically open/relieve pressure after glue feeding;5) The tank is equipped with pressure relief ball valve, and the bottom of the tank is reserved with backflow interface and interception to close the ball valve;6) Glue tank is reserved for manual feeding port to add glue in time;7) Glue tank can be used for constant temperature heating;4.4 Mixing systemsThe core component of PGV501 proportioning system is high precision gear metering pump. The appearance and principle of gear metering pump are shown in the figure.It has the following features:1) Volumetric measurement system with high ratio accuracy (±2%), suitable for medium and low viscosity two-component material ratio;2). Continuous glue discharge can be realized, and the amount of glue can be converted from 1g/s to 16g/s in a wide range;3) Stable operation, maintenance-free, long service life;4). Variable ratio requirements of 1:1~10:1 can be achieved through the selection and combination of different metering pumps;4.4 mixing system (dual liquid valve)The core part of PGV501 equipment mixing system is double liquid valve.The AB glue is transferred to the glue mixing part (double liquid valve) by metering pump and mixed in the mixing pipe under the double liquid valve. The online mixing method is ready to mix.The main features of double liquid valve are as follows:1) mixing motor drives the mixing tube through double leaf valve out of glue, then themselves layer down to the plastic head, thus evenly mixed glue, this process is completely sealed, and double leaf valve/mixing tube is filled with glue, without air bubbles, mixing process by double leaf switch valve cylinder glue closure back to suck, stop when the glue is not dripping glue;2) the maximum speed of the stirring motor can reach 3000 RPM (adjustable), which can fully stir evenly;3) stirring motor with automatic detection function;4.5 cleaning systemAutomatic cleaning, the mixed part of AB adhesive with gas and liquid automatic cleaning4.6 Three coordinate linear manipulatorThe three-coordinate linear mechanical arm is driven by servo motor, which can realize the precise position control of rubber head. Because of the teaching and programming method, the movement track of rubber head can be easily adjusted.The main parameters are as follows:Machine travel :600*600*100, (z-axis can be manually adjusted to 100)Visual range 600 (Y) *400 (Y)Speed: X, y0-500mm /, z-axis 0-100mm/Repetition accuracy: ±0.03mm (cumulative tolerance is not allowed)4.7 Conveying line (customizable)Frequency converter is adopted to control the conveying motor, the speed can be adjusted 10-300mm/s, belt/double speed chain/roller transmission is adopted, the front, middle and rear blocking cylinders are configured by default, clamping/jacking positioning is adopted by default, the positioning is accurate, the width of adjustable line body is 150-550mm.4.7 Control systemPLC, touch screen control, and configuration of teaching and programming system, the control system has the following characteristics:1) glue output is controlled by the speed of the motor to reach the required amount of glue, and the glue output speed can be adjusted at will;2) adjustable synchronous glue release, so that A/B glue flows out of the glue valve at the same time, and better mixing effect can be obtained;3) the device is equipped with anti-gel timer, vacuum defoaming, anti-curing time and defoaming time, which can be set.4) configurable single and continuous glue discharging functions to meet different technological requirements;5) the whole control is controlled by panasonic PLC, kunlun tongtai touch screen control device function, reserved communication interface, equipment running state and setting parameters can be captured by third-party equipment;6) security interlock program is configured to prevent employees from misoperation.4.8 Dispensing nozzleCan be customized according to the product different specifications of glue nozzles5,PGV501 Configuration listCategory Fully automatic glue potting machineBrandConfigurationsQuantityFrameSquare steel pipe/metal plate1 setMade in China Controlling systemPLC 1 setPanasonicVisual software system + glue control software system(CCD Positioning, glue ratio, glue discharge, running track and position speed are adjustable and controllable)1 setD&HHMI touch screen1 pcMCGSPC human-computer interface1setMade in ChinaMotion control card1 setJSTRSensor6 pcsMade in ChinaDriver5 pcsMitsubishi/raiserMobile platformGuide rail3 setsHIWINscrew rod3 setsTBIServo motor2 setsMitsubishiGlue supply systemStainless steel drum (material SUS304)2 pcs D&HHigh precision gear pump (guaranteed service time of pump core is 1 year)1 setsMade in ChinaDouble fluid flow dynamic mixing(including double liquid valve)1 setsD&HB glue flow display1 setsD&HY type filter1 setD&HSelf-cleaning deviceAutomatic solvent cleaning device1 setD&HThe conveyor line variable frequency motor1 set Made in ChinaAir cylinder1 setMade in ChinaDouble speed chain/belt/roller1 setMade in China6. Machine accessories ItemAccessories name and model numberQuantityRemark 1Double liquid valve sealing components3 setsDouble liquid valve wearing parts with NRB/Four fluorine graphite material that is anti-corrosion and wear resistance ;which normally replaced as per glue feature . 2Dynamic mixer pipe MR13-1210 pcsconsumables3Tool1 setStandard 4User manual1 pcStandard7:Maintenance Service 1.Seller provide one year warranty period and support free maintenance service during warranty . Software upgrade service is provided for a long life time. 2. In case parts of the machine become broken within the warranty because of non-artificial factors, we send you part replacement free, buyer pay for the shipment. Double-liquid valve should be bought at its cost price.3.If the parts of the machine become broken past warranty , the parts replacement should be shouldered by buyer.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...