IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese Gelon Lithium Battery Gn-Ws18/21/26/32 Semi-Automatic Cylinder Cell Winder1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Other Manufacturing Equipments for Electrical Electronic ProductCylinder Cell Winding MachineWinding Machine
Shandong Gelon Lib Co., Ltd.
Preview:
Product Description Battery Machine Semi-Automatic Cylinder Cell Winding MachineThis machine is mainly used for precision winding of 18650,21700,32650 batteries. The working process is as follows: the positive and negative plates are manually introduced into the winding part, stacked with the separator, and wound according to the process requirements, the termination tape is automatically attached, and the battery core is automatically discharged.1. Adopt single winding needle structure, the diameter of the winding needle can be replaced.2. Manual introduction of pole piece, automatic winding, automatic needle change, automatic tape termination and automatic blanking;3. The glue application position can be accurately controlled without tightening the battery core; the glue application is stable and reliable;4. The winding needle winding adopts the latest original variable-angle speed rotation technology, so that the linear velocity of the diaphragm and pole piece feed is relatively constant, that is, the purpose of constant tension during the winding process is achieved, and the winding of the battery core is neat and consistent. FeaturesColor touchscreen controlWinding motor direction control: forward and reverse switchable (manual mode)Adjustable tension (0 - 4 N) for both top and bottom separator filmsVacuum-assisted, 1200 mm long feeder bed for accurate cathode/anode film positioning & feedingAutomatic finish cut upon the completion of the configured number of rotationsSuitable for cylindrical battery sizes such as 18650, 21700, 26650 and 32650 (jelley roll dia. 14mm~32mm; length 25~70mm) Input PowerSingle phase 220 VAC, 50 / 60 Hz1 kW powerCompressed Air Compressed air of 0.7 MPa is needed for the operation of this machinePlease note the air compressor is not included. Cathode / Anode Feeding Loading material: cathode / anode sheets, such as aluminum foil coated with LiFePO4 or LiCoO2 (cathode), and copper foil coated with graphite (anode)Length range: < 1200 mm recommended (length of the feeder bed plus extension)Width range: 25 - 70 mm (adjustable on feeder bed)Thickness range: 100 - 300 μmSeparator Feeding Loading material: separator film rolls, such as polyethylene (PE) or polypropylene (PP)Length range: separator roll with a diameter < 250 mm Width range: 25 - 70 mmThickness range: < 100 μmTension range: 0 - 4 N for both top and bottom separator filmsWinding Winding needle size: 3.5 mm OD Electrode winding size: 14 - 32 mm OD, 25 - 70 mm in lengthTo wind an electrode core with a certain OD, a spreadsheet for calculating needed number of turns and electrode sheet length can be downloaded hereWinding speed: 0 - 400 rpm adjustableWinding precision: < 0.5 mm edge roughnessSize1000 mm L x 700 mm W x 900 mm HNet Weight150 kgWarranty Two years limited warranty with lifetime supportRusting or damage due to improper storage conditions or maintenance is not covered by warranty Company Profile We could supply one stop solution ( turn key project) for you. 1.Full set of lithium battery materials,including :LiMn2O4,LTO,LiNiMnCoO2(NMC),LiCoO2,Graphite(MCMB)and other cathode&anode battery materials;Aluminum foil,copper foils,battery separator,etc. 2.Full set of lithium battery equipments,for example:mixing machine --coating machine--oven--rolling machine--welding machine--slitting / cutiing machine --winding machine--sealed machine,etc. 3.Full set of lithium battery technology.we can design the laboratory and production line,according to customer's request.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...