IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese TMAXCN Brand 30L Battery Slurry Planetary Vacuum Mixer1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Planetary MixerPlanetary Vacuum MixerPlanetary Vacuum Mixing Machine
Xiamen Tmax Battery Equipments Limited
Preview:
Product Description 30L Battery Slurry Planetary Vacuum Mixer SpecificationsMixer specifications1-1 Product name and specificationA. Planetary dispersion vacuum mixer;B. Model:TMAX-DMS30L(4kw/2P-3kw/4P) 1-2 Basic structureA. Hydraulic lifting vessel type;B. 6-axis revolution direct material temperature measurement mode (the only way to accurately control the temperature);C. Double dispersion axis + double mixing axis + single scraping wall + single temperature measurement - (6 axis) 1-3 Mixing vesselA. Dimensions:Dia. 340mm×330mm;B. Design volume: 30L;C. Effective volume: 25L.A. Liner material: SUS304;B. After turning the inner liner wall, the mirror surface is polished to ensure good roundness;C. The upper flange plane of the mixing barrel and the upper barrel body are sealed by a sealing ring;D. There is one G1 "(DN25) discharge valve at the bottom of the barrel.E. The jacket with reinforced guide plate (G1 / 2 "inlet / outlet interface) can cool or heat the processed material with cold water (oil) or hot water (steam or hot oil).1-4 Upper vessel (kettle cover)A. Material: SUS304;B. One Φ 70 powder hopper, which can be switched on and off quickly; one spotlight; with two small windows (one spotlight port and one observation hole), one vacuum pressure gauge, and other necessary connecting pipes (vacuum / vent / standby).1-5 Mixing principleSingle agitated pulp and a plurality of serrated dispersing discs installed on the high-speed dispersing shaft are used for both rotation and revolution; at the same time, combined with the low clearance design of the agitating pulp, there is no dead angle, and the strong kneading interference motion and up-down / left-right circulation motion of the low-speed agitating paddle, as well as the high-speed shearing and scattering function of the dispersing disc, to ensure that the materials are fully dispersed, mixed and not deposited.1-6-1Revolution/mixing motor, frequency converter and reducerA. Quantity: one;B. Motor power: 3kw / 4P;C. With 3KW frequency converter matched with motor;D. Equipped with cycloid pinwheel reducer BL2, the reduction ratio is about I = 29, and the service factor FA = 1.0.1-6-2 Planetaryrevolution speedSpeed:0~50 rpm,adjustable 1-6-3 Wall scraperQuantity: 1 group;Scraping material: SUS304;Same as the revolution speed.1-7-1 Mixing blade /mixing speedSpeed:0~70rpm, adjustable1-7-2 Mixing bladeA. Material: SUS304;B. Quantity: 2 (groups);1-7-3 Selection ofmixing bladeA. Standard: "spiral twist";1-8-1 Distributed motor and frequencyconverterA. Quantity: one;B. Motor power: 4kw / 2p;C. With 4kw frequency converter matching with motor.1-8-2 Dispersion speed(rotation)A. Speed: 0 ~ 3800 rpm, adjustable;B. Linear speed: 0 ~ 12m / S; 1-8-3 Dispersion axis and discA. Material: SUS304;B. Diameter of dispersion disk: Φ 80mm;C. One, a dispersing disk is installed on the dispersing shaft to ensure better dispersion / mixing.1-9 Lifting (mixing barrel)A. Hydraulic liftingB. Lifting height: ≤ 380. 1-10 Vacuum systemA. The mixing and dispersion process can be carried out under vacuumcondition; vacuum degree: ≤ - 0.1MPaVacuum pump 2X-4, 0.55kw/4P motor(prepared by customer)C. With vacuum surge tank and switch.D. Dynamic seal: mechanical seal; static seal: O-ring seal.E. Keep the pressure for 24 hours, and do not leak oil into the mixing tank or under the condition of keeping the pressure. (this machine can keep the air tight, if there is such a requirement, special instructions can be provided).1-11 Positioning systemA. With positioning adjustment device and locking device, it can accurately position the mixing barrel and upper can body, and prevent rotation.B. The positioning stop of the lower flange of the upper can body is preciselymatched with the mixing barrel to ensure that the position of the mixing barrel is reasonable and the positioning is accurate.1-12 Distribution cabinetThe function display and operation of vacuum device, frequency conversion speed regulation, temperature display (control), spotlight, lifting, operation emergency stop, etc. in the operation of the equipment are carried out on the power distribution cabinet.Note: mixing and dispersion has timing function. 1-13 Safe operationA. Depending on the frequency converter and limit travel switch, through the specially designed control route, the can body can automatically stop when it reaches the specified position.B. In the process of can body rising, the mixing / dispersing part of the equipment cannot be started; similarly, when the machine is running the mixture, the can body cannot be lowered and the mixing bucket cannot beopened.C. The special design of vacuum buffer tank can effectively prevent thereturn of vacuum pump oil to the mixing drum.D. A door bolt type buckle is arranged on the kettle cover and the mixingbarrel to prevent the mixing barrel from falling automatically.1-14 Temperature measurement methodMeasure the material temperature: 0-300 oC, the temperature probe moves with revolution, and directly contacts the material1-15 WorktableStainless steel laboratory working platform1-16 Total host power4.4KW1-17 Working voltage /frequency380V/50Hz/3Phase;Control voltage: 220V. 2. Slurry discharge machine( positive pressure extrusion) - YLJ-30L(1.5kw/4P) 1. Structural formThe frame is single cantilever type.2. Lifting modeThe frame is fixed on the workbench.3. PressingmethodUse the hydraulic cylinder to drive the press plate to press the material.4.Drive part ofpressing plateDouble acting oil cylinder: Φ63/D32×S250FA;Quantity: one (set).5. Press plateThe nominal size is Φ 240, matching with the mixing drum; the plate isequipped with an exhaust port.6. Locking mode ofmixing drumMechanical locking.7. DischargemethodDischarge. 9. Basic technical indicators9-1. Motor power of oil station9-2 Pressure per unit area of pressing plate9-3. Oil pump flow and maximum outputpressure≤2.2KW/4P9kg/cm2Plunger: 1.6L/min-21MPa/max.9-4. Maximum presspressure9-5 Rated system pressure9-6 Oil cooling area3.3 tons12MPaAir natural cooling10-1 Consumable partsA. "O" seal ring: Φ340×Φ10;B. Material: fluororubber;C. Quantity: 1 spare.10-2 use ofwearing partsSealing groove at pressing plate.11. Transfer modeof mixing drumStandard selection: guide rail type transfer mixing drum is transferredbetween the main machine and the press.12. NotesShare the power distribution cabinet and oil station with the main engine.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...