IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese Yt29A Mining Machinery Pneumatic Rock Drill with Pusher Leg1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Mine Drilling RigPneumatic Rock DrillJack Hammer
Tianjin Baptech Machinery Co., Ltd.
Preview:
Product Description Product Description YT29A Pusher Leg Rock DrillWeight27kgDimension(L×W×H)659×248×205mmCylinder diameter82mmPiston stroke60mmWorking pressure0.63Mpa0.5Mpa0.4MpaImpact energy≥78J≥69J≥50JAir consumption≤88L/s≤65L/s≤52L/sImpact frequency≥39Hz≥37Hz≥36HzTorque≥20N·m≥17N·m≥15N·mWater pressure0.3MpaAir hose inner diameter25mmWater hose inner diameter13mmDrilling diameter34-45mmMax drilling depth5mWorking temperature-30~45oCShank sizeH22×108mmLubricatorFY250Weight1.2kgCapacity0.25LAir LegFT160AFT160BFT160CLength1668mm1428mm1820mmFeeding length1338mm1098mm1490mmPiston bore65mm65mm65mmWeight 17kg16mm18mmSafety instructionsTo ensure the risk of serious injury or death to yourself or others, carefully read through this instruction booklet before putting the rock drill to use. Always follow the instructions given. Always wear safety helmet, goggles and ear protectors during drilling. Any local regulations that exist must also be observed.When drilling in certain minerals, there is a risk of spark generation. Before starting work, check that the machine is approved (in accordance with local regulations) for work under such conditions.Check that the hoses used are of the right quality, and that all hose connections are in good condition and properly tightened.Before starting work on any of the systems, make sure that the air and water systems are without pressure.Make sure that there are no concealed wires or other sources of electricity. Never drill near any electric wires or other sources of electricity.Staring the rock drill Open the main valve for compressed air.Open the cock for the flushing water.Adjust the feed control lever to given a suitable feed force for collaring the hole.Align the rock drill so that the working tool touches the desired collaring point.Move the throttle lever forward a little, which will start water flushing, percussion and rotation.Collar the hole with reduced feed force.Move the throttle lever fully forward once the working tool has gained a secure footing in the rock.Adjust the feed force by means of the control lever so that the maximum penetration rate is obtained.Note! Do not bend the working tool as this will increase wear of the shank bushing and piston. Furthermore, it can also affect drilling efficiency and increase the risk of working tool breakage.Stopping the rock drillPull the throttle lever backwards, which will stop percussion, rotation and flushing water.Detailed Photos
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...