IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese Czxy Table Semi-Automatic Strapping Machine for Carton Case Boxes1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Strapping MachineStrapping MachineAutomatic
Cangzhou Xiaoyuan Carton Machinery Trade Co., Ltd.
Preview:
Product Description CZXY-1250 PP strapping machineMain introductionThis is a full-automatic strapping machine used for strapping products using a polypropylene (PP) strap (straps for machines) for stabilizing purposes. The products to be strapped are limited within the arch, whose inner specifications can be customized according to customer requirements). Be careful for rigidity of working materials, and don't try to strap wet,ashy, powder or too-heavy (usually max. load 80kg) packages.This machine was designed for strapping only. We strongly recommend that this machine not be modified and/or used for any application other than for which it was designed. Pay attention to the load-bearing capacity described in the manual. Do not use the machine until you have known all items.This equipment is not suitable for explosive environments. It shall be specially customized if it is will be used in explosive atmospheres.If it is used for the strapping of food or medicine products, it is recommended to use a specially customized stainless steel machine, which should be also cleaned and disinfected with disinfectants in accordance with industry regulations.If it is used for the strapping of corrosive goods (such as seafood, etc.), pay attention to rust protection, and do not let a corrosive liquid enter the strapping head. In case that it goes into the strapping head, it should be dried immediately to prevent the strapping head from rusting, which will result in motor overload.In case of objects or liquids spill,scattering on the ground around the machine, immediately remove these spills to avoid the risk of personnel slipping.We recommend using the following PP strap:Raw material:PPSpecifications:Width: 5mm-9mmThickness: 0.5mm -0.8mmStrap coil width:170mm- 190mmStrap coil core inner diameter:200mm-210mmStrap coil core outer diameter400mm-450mmMaximum tension force45 kgTechnical parameterSize:L1250 mm×W585 mm×H1970 mmPackage size:L1600 mm×W800 mm× H2100 mmWorktable height:850 mmBearing capacity:80 kgNet weight:185 kgStrap width:5mm-9 mmStrap coil:Coil core inner diameter 200 mm-210 mmOutside diameter 400 mm-450 mmWidth (face) 170mm - 190 mmStrapping speed:40 beats/min.Strapping specifications:Min. package size: W 80 mm × H 60 mm;Max. package size: Within the arch sizeAdhesion technique:Hot meltingAdhesion type:Bottom adhesion, adhesion surface≥90%, adhesion positional deviation≤2 mmTension force:0-45 kgPower:600W , 4 APower supply:1P, 220V, 50Hz (Refer to the nameplate)Noise emission:≤75 dB(A)Adjustable items:Arch size, and strap widthNotes:Standard arch size: W 650 mm× H 500 mm, other sizes customizableSubject to change without further noticeWorking principleThe object to be strapped is basically in the middle of the machine. Firstly, the right bar goes up, pressing the front end of the strap tightly and strapping the object, tensioning the strap on the object, then the left bar goes up, pressing at the proper position of the strap at the lower layer tightly, then the heater plate inserts between two layers of the strap, then the middle bar goes up, cutting off the strap, and at last the strap for the next strapping is sent to the right position, thus a working cycle is completed.Wendy Gao
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...