IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese Lab Small Mini Spray Dryer1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Drying MachineLab Spray DryerMini Spray Dryer
Xiangtan Xiangyi Instrument Limited
Preview:
Product Description DescriptionMiniature experimental micro spray dryer(spray dryer / spray dryer) and its main application in the laboratories of universities, research institutes and food pharmaceutical and chemical enterprises to produce micro particle powder, which is widely applicable to all solutions such as emulsions and suspensions, and is suitable for drying of heat sensitive substances, such as biological products, biological pesticides, enzyme preparations, etc. The material is heated only when it is sprayed into foggy particles, so it is only instantaneously heated to keep the active ingredients of these materials intact after drying.Main characteristicColor LCD touch screen parameter display: air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / pass needle frequency.Fully automatic control: One-click start-up, after setting spraying process parameters, the temperature reaches a predetermined temperature, the peristaltic pump starts automatically, the running animation is displayed on the touch screen, and the running process is clearly displayed; when the machine is shut down, just press the stop button, and the machine will automatically shut down safely.Manual control: If the process parameters need to be adjusted during the experiment, it can be easily switched to the manual state. The color touch screen is dynamically displayed (animated) throughout the experimentEquipped with nozzle cleaner (through needle), when the nozzle is blocked, it will be automatically cleared, and the frequency of through needle can be adjusted automatically.Shutdown protection function: Just press the stop button when shutting down, the machine will stop running immediately except the fan, to ensure that the equipment will not burn out due to misoperation (forced shutdown of the fan).The spraying, drying and collecting system is made of transparent high-quality high-borosilicate heat-resistant glass material, so that the drying process is performed in a pollution-free environment.Built-in imported oil-free air compressor, the particle diameter of the powder spray is normally distributed, the fluidity is very good, and the noise is very low, less than 60db.The atomizing structure of the two-fluid spray, the whole machine is made of high-quality stainless steel, and the design is compact without the need for auxiliary equipment.The design of drying temperature control uses real-time control PID constant temperature control technology to make the temperature control in the whole temperature area accurate, and the heating temperature control accuracy is ± 1 °C.In order to maintain the purity of the sample, an air inlet filter is equipped. The feed volume can be adjusted by the feed peristaltic pump, and the minimum sample volume can reach 50ml.The particle size of the finished dry powder is relatively uniform, and more than 95% of the dry powder is in the same particle size range.For viscous materials, a nozzle cleaner (through needle) is provided. When the nozzle is blocked, it will be automatically cleared and the frequency of the through needle can be adjusted automatically.Innovative tower wall purging device, higher material recovery rate.Technical parametersMODELSD-6000GSD-6000SSD-6000NOil-free air compressorBuilt-inBuilt-inBuilt-inPictureBag filterN/AN/AIncludedGlassware materialHigh borosilicate glassStainless steelHigh borosilicate glassNozzle materialStainless steelStainless steelStainless steelExternal materialStainless steelStainless steelStainless steelWater evaporation1500ml/h1500ml/h1500ml/hMax sample feed rate2000ml/h2000ml/h2000ml/hMinimum feed quantity50ml50ml50mlDrying chamber diameter (mm)Φ300Φ300Φ300Nozzle typeTwo-fluid Two-fluidTwo-fluidNozzle size1.0mm (Can be chosen from 0.5mm/ 0.7mm/ 0.75mm/ 1.0mm/ 1.5mm/ 2.0mm)Maximum inlet temperature~250 C (adjustable)~250 C (adjustable)~250 C (adjustable)Max. outlet temperature140°C140°C140°CTemperature controlPID/±1°CPID/±1°CPID/±1°COperation modeAuto + ManualAuto + ManualAuto + ManualDisplay7'' Touch LCDDisplay inlet temp., outlet temp., de-block frequency, inlet air volume, feed rateParticle making size1~25um1~25um1~25umDry time1.0 ~ 1.5s1.0 ~ 1.5s1.0 ~ 1.5sHot air conditionAir supplyAir supplySuctionHeater capacity3kw3kw3kwBlower [power (kw), air volume (m /min)][0.25, 9.5][0.25, 9.5][0.25, 9.5]Air compressor power (kw)0.58kw0.58kw0.58kwMax. Air inlet volume (L /min)108L/min108L/min108L/minAir compressor work pressure2-5 bar2-5 bar2-5 barElectric power (kw)4kw4kw4kwOutline size (mm) (l×w×h)800×600×1300800×600×1300900×600×1300Installation weight 90kg90kg100kgPower supply220V/50Hz220V/50HzOPTIONALNO.ITEM NAMESD6001Extra nozzle can be chosen from 0.5mm/ 0.7mm/ 0.75mm/ 1.0mm/ 1.5mm/ 2.0mmSD6002Bag filter deviceSD6003Inert loop system (for process flammable or explosion type materialSD6004Extra set of glassware or single glassware for backup use
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...