IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese Smart Electrical Driven Pump Skid 35MPa 5000psi Flushing Well Cementing Drilling Well Pump1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Mud Circulating SystemFlushing Well PumpDrilling Well Pump
Puyang Chensheng Petroleum Technology Co., Ltd.
Preview:
Product Description Smart Electrical Drive Pump Skid1.Technical Features Advantages of pump skid:a. Multiple operation modes:Manual control/Automatic control/Remote control/Unattended, etc. and can be connected to the oil field monitoring network;b. Mechanical/Automatic control dual safety protection system, with remote control mode, more friendly to operators, more comply with oilfield HSE safety requirements;c. Freely control the speed, torque, and power of the power unit through the automatic control unit, to achieve accurate adjustment of water injection displacement and pressure of the three-cylinder plunger pump.d. Low energy consumption, high power, low operating cost;e. Small size, low noise, wider range of use areas. Plunger pump parameters Plunger pump model3ZB-145AInput power 145kWTravel 135mmExternal gearbox speed ratio4.6Maximum speed of plunger pump input shaft280rpmDiameter of plunger 100mmMaximum pressure 35 MPaMaximum displacement50m3/hDisplacement per stroke3.18 L/rInlet diameter4"outlet diameter2"Power unit parametersRated/Max power145/250kWRated/Max torque1044/1900N.MRated voltage 350 VACWeight 2800kgProtection level IP67Maximum output torque of the gearbox10507 N.mMaximum input speed of gearbox3000 RPMGear ratio 5.53, 3.05, 1.66, 1Overall dimensions5400×2100×1880mmWeight≤6800kgEquipment storage ambient temperature-20oC-+45oC2. Modular Electric Drive Power SystemThe XJB350A dual-control pump skid isn't the diesel engine power and industrial three-phase motor power, and adopted new driving power to modular electric drive systems, with smaller size and higher control capabilities, and matched with specialized oilfield water injection/fracturing control software.Compared with the traditional industrial motor+gearbox drive system, the advantages of modular electric drive system mainly include:2.1Wide speed rangeThe new modular electric drive system may have a maximum speed of four times or more than the motor base speed. The power integrated system can be adjusted at any speed from 1 to 3000 RPM, which makes it possible to continuously control the output of the water pump when applied to the water injection system.2.2 Improved control systemThe control system of the new modular electric drive system has been significantly enhanced, various operations such as speed, torque, and emergency control can be performed on the power integration system through local or remote control modules. Due to the extensive use of computer control in the control of the new modular power system, it is possible to link the output information of the three cylinder plunger pump with the power system control. The Electronic Control Unit (ECU) facilitates synchronized control strategies that coordinate speed regulation and power output adjustment with the plunger pump, making the control technology more efficient.2.3 Better power efficiencyThe difference between the new modular electric drive system and traditional industrial electric motors lies in: The new modular electric drive system mainly uses permanent magnet synchronous motors, which have high power density, high efficiency, wide speed regulation range, small torque fluctuation, and excellent rapid start-up performance. During operation, the speed is not affected by the load and has good dynamic response performance; High efficiency and lightweight at low speeds, capable of achieving ultra-low speed operation; Capable of achieving high power and high-speed operation with lower power density.3.Automatic Control SystemThe control system for the XJB350A dual-control pump skid (remote control+local control) includes low-voltage lighting system wiring, various sensor assemblies, power and data cable connections between the local control cabinet and equipment components/sensors, a drive shaft speed-to-flow conversion system, and supporting various electrical materials, wires, data cables, etc. Key supporting equipment mainly consists of:1. Remote/Local Control System: The local control cabinet is installed on the equipment operating platform, enabling full operational control of the equipment. There is a [Remote/Local Switch] on the local control cabinet, and the remote mode is activated when set to [On]. Remote control adopts wireless operating system.2. The data acquisition system consists of an on-board control box (remote control cabinet), an on-board instrument box, sensors, connectors, etc. This system has new practical functions such as on-board control of power system startup, remote control, shutdown, and logical process control. This automated control system makes equipment work safer, faster, more practical, and more convenient in oil fields.The local control cabinet is located on the main control platform. This system can achieve motor start stop speed control operation, gear operation, remote/local switching, and safety technical parameter setting. The control cabinet PLC system can monitor changes in displacement, pressure, liquid level, and temperature during the process, set necessary parameters for protection, and coordinating with the power unit system to adjust idle speed or shutdown. The PLC system can achieve continuous statistics of displacement (cumulative numerical statistics) and set the plunger pump pressure. The control cabinet panel is divided into two parts: touch screen area and manual control area.The remote control module is a handheld control terminal that is compact, beautiful, and sturdy. The remote control module can achieve the main functions of the local control cabinet. The whole machine control adopts local/remote control mode, and the switch is located in the local control cabinet. In remote mode, once the remote control cabinet fails or there is no signal, the system immediately enters an emergency stop state to ensure that the system is within a safe and controllable range.The remote control terminal adopts wireless control mode, which is stable in signal, convenient in operation and compact in structure.Remote control terminal interface layoutAt the same time, the automation control system can be networked with the central monitoring system of the oilfield according to user requirements, and operators can operate and monitor the equipment in a monitoring center far away from the production site.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...