IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese Wemac Pharmaceutical Industry Wood Packing 100L-3000L Best Water Multi-Effect Distiller1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Pharmaceutical Injection EquipmentWfi Water for InjectionWfi Skids
Shandong Eagle Pharma Machinery Co., Ltd.
Preview:
Product DescriptionMulti effect water distiller IntroductionThe six effect distilled water(WFI Generation plant) manufactured by Shandong Eagle is an equipment that uses purified water as raw material and industrial steam to heat water for injection (no external cooling water is required). The produced water for injection meets the specifications of Chinese Pharmacopoeia (CP2020), the United States Pharmacopoeia (USP43) and the European Pharmacopoeia (EP10) for injection water.Structural form: the external preheater, condenser and first effect evaporator are all of double tube sheet plate design, and the internal tube sheet expansion and external welding process are adopted to avoid cross contamination;Separation device: with falling film evaporation, gravity separation and spiral turbulence three-stage separation, the best non condensable gas discharge point is designed to discharge non condensable gas to the maximum extent;Material: SS316L is used for all parts in contact with raw water, water for injection and secondary pure steam;Thermal insulation: the evaporator, preheater and condenser are insulated with aluminum silicate needle felt, which has good ductility, light weight, excellent thermal insulation and strong stability;Surface treatment: electro-chemical polishing of internal and external surfaces, effectively ensuring the surface finish of stainless steel:Technical FeaturesEnergy saving and consumption reduction: since the secondary steam of the multi effect distilled water machine is used step by step in each effect, the utilization rate of industrial steam is very high, which has obvious energy saving effect. Industrial steam consumption is 1:0.21; Raw water consumption is 1:1.08; At the same time, the six effect distilled water machine does not need external cooling water;Stainless steel pipe is used to stretch the elbow directly to avoid welding. For the welding of pipes and fittings, argon protected automatic welding (single-sided welding and double-sided forming process) is used as much as possible to ensure the welding quality and electrochemical polishing after welding;Provide endoscopy photos, solder joint drawings, pressure test and pickling passivation reports, system design documents and other verification data;The control system adopts HMI + PLC full-automatic control. Various communication modes can be provided. Control system permission level: at least three levels of permission can be set;Add SCADA online system to realize data acquisition and online monitoring and control;Online monitoring of conductivity, temperature, flow and other parameters. Recorder records key data;Please enter the title hereQualified feed water is pressurized by multi-stage pump into the Condenser, and then sequentially into each Preheater (fed water in the Condenser is heated by the secondary steam, distilled water, and then into each Preheater after the condensed water is heated by the secondary steam, and in the first Preheater is heated by the condensed water of the industrial steam), and then into the first Evaporator through the feed water distributor is sprayed on the inner wall of the heating tube, so that the feed water in the wall of the tube becomes a film flow, and is heated by the industrial steam. Heating vaporization. Produced entrained water droplets of the secondary steam, from the lower end of the evaporation chamber into the vapor separation device, was separated from the pure steam into the next Evaporator as a heating steam, not evaporated feed water into the next Evaporator, repeat the above process. The pure steam produced by the final Evaporator into the Condenser with the condensed water from the condensed water in addition to the first Evaporator of the convergence of cooling, by excluding non-condensable gases (depending on the model, the Evaporator can also be equipped with such non-condensable gases on the continuous discharge device), to become the water for injection. The outlet is usually tested online for conductivity, and qualified distilled water is exported as water for injection, while unqualified distilled water will be discharged. Product features :1. Structure: External Preheater, Condenser and the first Evaporator are all double tube plate design, using the inner tube plate expansion outside welding process, to avoid cross-contamination.2. Separation device: Three-stage separation with falling film evaporation, gravity separation and spiral flow.3. Material: SS316L is used in all parts in contact with raw water, water for injection and secondary pure steam.4. Thermal insulation: Evaporator, preheater, condenser are insulated with aluminum silicate needled blanket, which has good extensibility, light weight, excellent thermal insulation and strong stability.5. Surface treatment: Electrochemical polishing of internal and external surfaces effectively ensures the surface finish of stainless steel.6. Energy saving and consumption reduction: Multi-column Water Distiller has obvious energy-saving effect because the secondary steam is utilized step by step in each column, so the utilization rate of industrial steam is very high. With the increase of the number of Evaporator columns, this energy saving effect is more obvious. At the same time, the amount of cooling water is also greatly reduced with the increase in the number of columns. Our company produces five-column Water Distiller using a small amount of cooling water, six-column Water Distiller without cooling water. Mode(6column)Capacity Industrial steam consumptionFeed water consumptionLDS 1000-6≥10002101100LDS2000-6≥20004402200LDS 3000-6≥30006703300
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...