IPDB › China Industry › Instruments & Meters › Heating, Refrigeration & Temperature Control
China, Chinese Ultimheat Immersion Heating Tubes Heating Elements Liquid Heater with Screw Flange 400V 8000W1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Heating Refrigeration Temperature ControlImmersion HeatingElectric Flange Immersion Heater
JPCI Controls (Foshan Gaoming) Co.,Ltd
Preview:
Product Description Main applications: Liquid heating, hot water circuits, containers and buffer tanks.These products have been engineered for precision liquid heating. The initial setting of the PID controller, however, is intended for a professional. The best results are obtained in stirred tanks.They exist in:- 5 standard power levels: 1kW; 1,5kW; 2kW; 3kW; 4kW- 2 types of standard fittings: 1"1/2 and M45x2- 2 types of surface load density: 5W/cm2 and 10W/cm2. See technical introduction to optimize the surface load.Heater tube material: 8mm dia. AISI 304 or Incolloy 800 (AISI 316; AISI 321; Incolloy 825 on request).Fitting material: Brass, swiveling on housing, brazed on tubes. (AISI 304 or AISI 316, TIG welded, or brazed, models are available on request). Supplied without gasket and without nut. See accessories below.Thread: 1 "1/4 or 1 1/2" BSPP (ISO 228). Metric thread M45x2 available on request.Temperature control:- Electronic temperature controller with double digital display of temperature set point and measured value. This microprocessor controller uses Fuzzy Logic technology. It reaches a predetermined set point more quickly, with minimal overshoot during the disturbances related to the rise or external load. It regulates with PID action, whose setting is simplified by the auto-tune function that automatically adjusts the parameters P, I and D (A clear User Manual is supplied). If the temperature sensor is broken, the output power is cut off and the error is displayed.- Temperature display Accuracy: 0.2% of full scale.- Temperature sensor: Pt100- Display is configurable in degree or tenth of a degree.- The two high or low alarm outputs can be set over the entire range of adjustment and have an adjustable differential.Enclosure: Extremely robust, in thick PA66, designed for outdoor installation, IP65 and IK10. It also includes:- A fuse to protect internal circuits.- An illuminated on- off switch- A polycarbonate transparent window allowing access to the settings. This window can be secured with seals. This case also includes a separate lid, with independent seals, providing access to electrical connections- On the rear side is located an aluminum housing with cooling fins for a built in 25A SSR.In models with failsafe manual reset limiter, reset can be accessed after opening the window.Cable glands: Located on a removable mounting board, providing easier access for connections, fitted with one M25, PA66, and one more hole for M25, closed by a plastic cap.Thermowell: In standard, one thermowell in AISI304, dia. 10mm, 135mm length.Electric connections:- Built-in terminal block, with 5 terminals 6mm2 and 5 terminals 2.5mm2.This terminal block is provided with a strap between terminals 1 and 2. By removing this strap, it is possible to connect an additional safety device, a remote control, or a timer.- Auxiliary high alarm and low alarm contacts (3A 250V max.)Support grid: 1 grid AISI 304 for lengths from 400 to 600mm, 2 grids above.Not heating immersed zone: 50mm.Surface load: standard 5W/cm2 or 10W/cm2, other values on request.Voltage: 220-240V single phase only.Standard options:Manual reset limiter, preset at: 60°C, 80°C, 100°C, 110°C, 130°C. (140°F, 176°F, 212°F, 230°F, 266°F). ExhibitionsCompany ProfileJPCI Controls originated from the French family-owned company founded in 1972, our company was founded in 2000, headquartered in Gaoming District, Foshan City, Guangdong Province, China, which is specialized in the design and production of mechanical thermostats, safety devices and electric heating systems for domestic and industrial use. JPCI owns an internationally renowned brand, ULTIMHEAT, and has a subsidiary in Lyon, France.After more than 50 years of development, JPCI has become a research and development enterprise which is deeply exploring the international market. JPCI Controls covers an area of 30,000 square meters, has more than 300 employees, including 30 professional R & D and laboratory employees, and produces more than 6 million products per year, with more than 10,000 product models. Our production has achieved full vertical integration to ensure quality control at each stage, our company has more than 1000 sets of testing equipment such as ultraviolet aging testing machine, motor loading machine, hydraulic hi-pot bursting testing machine to strictly monitor product quality. JPCI Controls has always adhered to the values of innovation, listening, responding and continuous improvement to ensure that products can achieve the best quality. JPCI holds 250 patents and applies for an average of 20 patents per year. Won the national high-tech enterprises and passed the system certification ISO9001, ISO14001, ISO45001; It has a 750 self-built laboratory and has passed the ISO17025 laboratory certification of TUV&UL. JPCI Controls is driven by innovation, guaranteed by quality, and takes environmental protection as its responsibilitylooking forward to working with you to create a better future.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...